2.4GHz ISM Series Transceivers
Supplier: Amiccom
Technology type: ISM
AMICCOM offers a huge variety of devices for 2.4GHz wireless applications. Besides the bare radio ICs, usually interfaced by SPI from a customer’s MCU of choice, most of them are available with an attached application MCU, as so-called SoC (System on Chip), as well.
The portfolio ranges from rather low data rate devices to chipsets for transmission speeds up to 6 Mbps. High TX output power (even up to +20dBm) and good sensitivity eliminates the need for additional external hardware (like amplifiers or FEMs) for most use cases. Low power consumption/good efficiency is a key feature of many parts.
The so-called “Wake-On-Radio” (WOR) feature and integrated packet handling features reduce the workload for the application MCU, which further helps to save power and extend battery run-times.
Range features
A high level overview of what this range offers
- TX, RX, TRX devices for the 2.4GHz frequency range available
- Supported modulation types: (G)FSK)
- Over-the-air data rate: up to 6Mbps
- TX output power: up to +20dBm (100mW)
- RX sensitivity: e.g. down to -90dBm @data rate 2Mbps; IF BW = 2.4MHz (for illustration purposes only, as this parameter is highly modulation/receiver setup dependent)
- High resolution, fast settling fractional synthesizer à perfectly suited for frequency hopping systems
- TX/RX payload data FIFO
- Integrated packet handler with CRC, FEC and data whitening options
- “Wake on Radio” (WOR): the radio can listen for incoming packets or transmit predefined payloads autonomously, without steady interaction from the MCU, at given, user-defined intervals
- Commonly used QFN type packages.
What's in this range?
All the variants in the range and a comparison of what they offer
Radio ICs (selection)
Part Number |
Frequency [MHz] |
Data Rate [kbps] |
Max. TX power [dBm] |
Additional features summary |
---|---|---|---|---|
A7137 |
2400 … 2483.5 |
… 2000 |
+10 |
(G)FSK; QFN20 4x4 package |
A7131 |
2400 … 2483.5 |
… 4000 |
+10 |
(G)FSK; QFN20 4x4 package; pin-compatible with A7137 |
A7196 |
2400 … 2483.5 |
… 6000 |
+19.5 |
(G)FSK; high data rate; high TX power; QFN24 4x4 package |
A7325 |
2400 … 2483.5 |
… 2000 |
+10 |
(G)FSK; QFN16 4x4 package; TX only complement to A7137 TRX and others |
Radio SoCs (selection)
Part Number |
CPU type |
RAM [kB] |
Code memory [Flash; kB] |
Additional features summary |
---|---|---|---|---|
A8137M0 |
ARM Cortex-M0 |
8 |
64 |
I2C, SPI, UART, PWM x2, ADC; integrated lithium battery charger; based on A7137 radio; QFN48 6x6 package |
A8325 |
8051 |
1 |
16 |
UART, PWM x2, ADC; based on A7325 TX only radio; QFN20 4x4 package |
A8108 |
8051 |
0.5 |
32 |
Wireless USB SoC; QFN32 5x5 package |
|
|
|
|
For more variants Please contact us. |
Call an expert today
Enquire
Submit your enquiry directly to one of our Technical Sales Specialists.
Alternatively call our Sales Team.
Mandatory fields*
Our IoT and Wireless Technology Centre will advance your ability to deliver innovative technology solutions for complex applications – from sensors to the cloud.
Creating custom solutions and navigating adding challenging connectivity to an application requires specialist expertise and capabilities. Our team of hardware design and software application engineers have extensive experience, ensuring we can bring your concept to life.
Covering proof of concept and feasibility studies for development, through to working prototype realisation and initial production management, our team delivers you complete project support.