Phase change material (PCM)
Supplier: MTC
Technology type: Thermal Interface Materials
Phase Change describes the shifting from solid to soft condition when reaching a specific temperature. It is a wax-based thermally conductive material. It begins to melt and flow at temperatures between 45°C and 55°C. It is available in different material thicknesses and delivery forms.
Advantage: by using PCM there is no bleeding of material at the edges. The liquid phase of the material can fill interface irregularities with better efficiency than traditional gap fillers, while in solid condition at room temperature, it is more durable and easier to handle during assembly.
Phase change material Results are as follows:
- Maximum coverage of the surface.
- Unevenness between two matching surfaces will even out.
- Minimises material thickness of thermally conductive product.
Range features
A high level overview of what this range offers
- Smooths out microscopic bumps
- High volume resistance of 10^13 Ohm*cm
- Adhesive, flexible and easy to use
- Standard 400x300 mm plates or custom die-cuts
- Available in thicknesses from 0.05 to 0.5 mm
- Eliminates the smallest unevenness
- Optimal thermal resistance.
What's in this range?
All the variants in the range and a comparison of what they offer
Property |
TCPC-PI-1,6 |
TCPC-3,0 |
TCPC-5,0 |
Unit |
---|---|---|---|---|
Thermal conductivity |
1,6 |
3 |
5 |
W/m*K |
Thickness |
0,2 bis 0,5 |
0,1 to 0,5 |
0,1 to 0,5 |
mm |
Phase hange temperature |
50 to 60 |
50 to 60 |
50 to 60 |
Grad C |
Standard sheet size |
200x300 200x400 |
400x300 |
400x300 |
mm |
Volume resistivity |
10^12 |
10^7 |
10^7 |
Ohm*cm |
Colour |
Yellow |
Grey/yellow/pink |
Black |
|
Downloads
Enquire
Submit your enquiry directly to one of our Technical Sales Specialists.
Alternatively call our Sales Team.
Mandatory fields*
Within the Magnetics Products Technology Centre, we offer an array of services to help create customised solutions.
With the largest team of technical support specialists in Europe, we are at the forefront of a design led approach to delivering challenging and custom solutions for magnetic cores or components for production.
Whether your need is simple or complex, we can develop a solution to achieve your goals. With in- house experts we can design, develop and test prototypes that meet performance and environmental requirements of your application.