EMI ferrite disks and plates
Supplier: Laird
Technology type: Ferrite Cores
Wherever EMI and active antennas disrupt the circuit board after the soldering process, Laird Steward ferrite disks and plates offer a simple, cost-effective solution.
The ferrite disks and plates can be utilised either as inductively coupled components or, as EMI shields on PCBs. The inductive coupling occurs when the ferrite affects the conducted waveform leaving the active component. The rise time of the waveform is effectively slowed by the ferrite. The overshoot and associated ringing are attenuated.
On PCBs, they can be placed directly on the EMI source, absorbing the radiated emissions at their core. This can help streamline your design and reduce overall material cost with maximum efficiency.
Range features
A high level overview of what this range offers
- Can be used to locate unwanted EMI antennas
- Flat flex and ribbon cables
- Each part for volume production is provided with permanent, double-sided 3.5 mil acrylic adhesive with 218 oz. adhesion
- Provides retrofit auxiliary EMI attenuation
- RoHS compliant
- Wide range of sizes
- Custom size available upon request
- High reliability and tight tolerance control
- Automotive-grade solutions
What's in this range?
All the variants in the range and a comparison of what they offer
Ferrite plate series |
Dimensions (L x W x H min mm) |
Material |
Relative initial permeability |
Adhesive tape |
Temperature range |
---|---|---|---|---|---|
HM |
20 x 20 x 1.27 |
28 |
650 |
Yes |
-40 to +125°C |
HP |
26 x 26.42 x 1.27 |
28 |
650 |
Yes |
-40 to +125°C |
33P |
53 x 50 x 1.10 |
33 |
2300 |
No |
-40 to +125°C |
MP |
8 x 8 x 1.10 |
28 |
650 |
Yes |
-40 to +125°C |
MM |
17 x 17 x 1.27 |
28 |
650 |
Yes |
-40 to +125°C |
29D |
5.0 x 25.2 x 3.18 |
29 |
700 |
No |
-40 to +160°C |
Enquire
Submit your enquiry directly to one of our Technical Sales Specialists.
Alternatively call our Sales Team.
Mandatory fields*
Within the Magnetics Products Technology Centre, we offer an array of services to help create customised solutions.
With the largest team of technical support specialists in Europe, we are at the forefront of a design led approach to delivering challenging and custom solutions for magnetic cores or components for production.
Whether your need is simple or complex, we can develop a solution to achieve your goals. With in- house experts we can design, develop and test prototypes that meet performance and environmental requirements of your application.