Sweden
Interconnect – Fibre Optic Patch Cords
The interconnect product range from AC Photonics is backed by use of high-quality fibre optic cab
Supplier: AC Photonics
Technology type: Fibre Optic Cables, Connectors and Assemblies
The interconnect product range from AC Photonics is backed by use of high-quality fibre optic cables and connectors with a flexible approach to customised solutions whilst maintaining short lead-times.
The patch cords, sometimes referred to as optical fibre jumpers, are available using multi-mode (MM), single mode (SM) and polarisation maintaining (PM) fibres.
Standard connectors include FC, SC, ST, LC, MU in both simplex and duplex configuration. Special connectors (E-2000, F-3000 etc.) and PC/UPC/APC types are also readily available.
Range features
A high level overview of what this range offers
- High Return Loss (RL) and low Insertion Loss (IL) performance
- Stringent mechanical and environmental test conditions to ensure minimum loss variation
- Connector types: Polished Connector (PC), Ultra Polished Connector (UPC) and Angled Polished Connector (APC)
- Price / performance (reliability and stability) ratio cannot be compared to low-cost, sub-standard patch cables
- Typical uses where mission critical performance is essential include telecommunication systems, CATV networks, long-haul and core fibre optic networks
- PM connector axis alignment to slow axis, fast axis, slow axis 45° to key or key unlocked
- Pigtail styles to include bare fibre, 900 µm loose tube, 900 µm tight buffer or 1.6/2/3 mm jacket
What's in this range?
All the variants in the range and a comparison of what they offer
|
Patch Cord Fibre Type |
IL - PC FC-SC-LC / ST-MU (dB) |
IL - UPC FC-SC-LC / ST-MU (dB) |
IL – APC FC-SC-LC / ST-MU (dB) |
RL - PC (dB) |
RL – UPC (dB) |
RL – APC (dB) |
ER (dB) |
|---|---|---|---|---|---|---|---|
|
SM |
0.2 / 0.25 |
0.2 / 0.25 |
0.2 / 0.30 |
40 |
50 |
60 |
n/a |
|
MM |
0.2 / 0.25 |
n/a |
0.2 / 0.30 |
30 |
n/a |
35 |
n/a |
|
PM |
0.2 / 0.25 |
0.2 / 0.25 |
0.2 / 0.30 |
40 |
50 |
60 |
20 |
Enquire
Submit your enquiry directly to one of our Technical Sales Specialists.
Alternatively call our Sales Team.
Mandatory fields*
The Fibre Optics Technology Centre is the driving force behind our ability to develop solutions requiring custom fibre capabilities.
When standard components don’t suit your requirements, we will support the design and development of custom software or hardware to fit your unique needs. The facility is also experienced in running diagnostic testing, fault finding and modification of components.
So, whether you need to analyse the performance of your optical components or understand your current power levels, our highly trained team of engineers are on hand.
Call an expert today
Associated technologies
Sensors
Interconnect
Imaging
