Radio Frequency Iron Powder Cores
Supplier: Micrometals
Technology type: Powder Cores
Radio frequency soft magnetic materials from Micrometals are based on carbonyl iron powders. They are suitable in a really wide band of frequencies where other materials cannot be used due to a decrease of permeability (thus saturating) or increased losses (thus increasing heat and reducing efficiency). Offering a high Q factor in applications up to 700MHz they are the perfect solution for inductors and transformers in radio, video communication, or broadband applications.
The permeability (µr) range is from 1 to 35.
Range features
A high level overview of what this range offers
- Available in 11 different materials
- Optimised for specific frequencies
- Toroids available in core sizes from OD 1.27mm up to 165.1mm
- Mix-2 preferred material for audio amplifiers filters and radio frequency
- Available in toroid, E core, balun, hollow, bus bar, cup, disc, EH, EM, U, plain, rectangular, sleeve, and threaded core shapes
- Customised shapes also possible
- Mix-8 low core loss and good linearity under high bias conditions
What's in this range?
All the variants in the range and a comparison of what they offer
Material mix no. |
Permeability |
Typical AL tolerance (%) |
Powder type |
Temp coef of perm (+ppm/C°) |
Density gm/cm3 max |
Frequency (MHz) |
Relative cost |
Colour code toroid |
---|---|---|---|---|---|---|---|---|
-0 |
1 |
N/A |
Phenolic |
N/A |
N/A |
N/A |
1.3 |
Tan/tan |
-1 |
20 |
±10 |
Carbonyl iron |
280 |
6.4 |
10 |
3.8 |
Blue/clear |
-2 |
10 |
±5 |
Carbonyl iron |
95 |
5.0 |
45 |
2.2 |
Red/clear |
-3 |
35 |
±10 |
Carbonyl iron |
255 |
6.5 |
5.0 |
3.3 |
Gray/clear |
-4 |
9 |
±5 |
Carbonyl iron |
280 |
5.0 |
17 |
2.2 |
Blue/white |
-6 |
8.5 |
±5 |
Carbonyl iron |
35 |
5.0 |
55 |
3.6 |
Yellow/clear |
-7 |
9 |
±5 |
Carbonyl iron |
30 |
5.0 |
50 |
3.0 |
White/clear |
-8 |
35 |
±10 |
Carbonyl iron |
255 |
6.5 |
5.0 |
3.1 |
Yellow/red |
-10 |
6 |
±5 |
Carbonyl iron |
150 |
4.9 |
83 |
5.5 |
Black/clear |
-15 |
25 |
±10 |
Carbonyl iron |
190 |
6.4 |
7.0 |
3.4 |
Red/white |
-17 |
4 |
±5 |
Carbonyl iron |
50 |
4.8 |
170 |
3.5 |
Blue/yellow |
Enquire
Submit your enquiry directly to one of our Technical Sales Specialists.
Alternatively call our Sales Team.
Mandatory fields*
Within the Magnetics Products Technology Centre, we offer an array of services to help create customised solutions.
With the largest team of technical support specialists in Europe, we are at the forefront of a design led approach to delivering challenging and custom solutions for magnetic cores or components for production.
Whether your need is simple or complex, we can develop a solution to achieve your goals. With in- house experts we can design, develop and test prototypes that meet performance and environmental requirements of your application.