Adlink VPX

VPX 3U and 6U Rugged Cards

A comprehensive range of rugged VPX CPU, I/O cards and chassis built for extreme environments.

Supplier: ADLINK

Technology type: VPX

The ADLINK range of VPX (Versatile Performance Switching standard), VITA 46.x VITA 48 and VITA 65, Eurocard form factor products support switched fabrics across a high speed connector. These products are aimed at embedded systems used in extreme harsh environments where size, weight, and power (SWaP) are a hard requirement. 

ADLINK's VPX range of commercial off-the-shelf (COTS) products enable rapid deployment with shortened development time compared to proprietary systems.

ADLINK VPX high performance blades are offered in both 3U and 6U form factors. All ADLINK VPX products are Extreme Rugged™ and suitable for mission-critical applications including radar; sonar, intelligence, surveillance and reconnaissance (ISR).

Range features

A high level overview of what this range offers

  • Long life cycle VITA 65 open VPX support
  • Support for VITA 46.x and VITA 48
  • 3U and 6U options with range of Intel CPU’s
  • Conduction cooled options
  • GPGPU support with NVIDIA long life chipsets
  • SOSA certified
  • Powerful solutions for battlefield AI
  • Development/ starter kits available
  • Custom design options
  • Tested and certified range solutions

What's in this range?

All the variants in the range and a comparison of what they offer

 

Model

CPU

RAM

Key features

Form factor

VPX-3020

  Intel® Xeon® processor E-2254ML and 9th Gen Intel® Core™ i3

Up to 16Gb ECC soldered DDR4

  • Up to 64GB SATA SLC SSD option
  • Up to PCIe x16 Gen3 interface supporting non-transparent bridge
  • One XMC expansion slot, PCIe x8 Gen3 with rear I/O to P2
  • Conduction or air cooled with conformal coating

3U

VPX-3010

  • Intel® Xeon® processor D-1500 SoC up to 12 cores (formerly "Broadwell-DE")

Up to 16Gb ECC soldered DDR4

  • Dual 10G-KR, up to three 1G Ethernet ports
  • Up to PCIe x16 Gen3 interface supporting non-transparent bridge
  • One XMC expansion slot, PCIe x8 Gen3 with rear I/O to P2
  • Conduction or air cooled with conformal coating

3U

VPX3001

Quad-core 3rd generation Intel® Core™ i7 processor

Up to 8Gb ECC soldered DDR3

  • Two PCIe x4 Gen2 data plane to P1 with NTB
  •  Two 1000BASE-T or two 1000BASE-BX to P1
  •  One XMC.3 PCIe x8 Gen2 with rear I/O to P2

3U

 

Model

CPU

RAM

Key features

Form factor

VPX6H10

  • Intel® Xeon® processor D-1559, 12 cores

Up to 32Gb DDR4

  • Onboard SLC SSD up to 64GB SATA 6Gb/s
  • NVIDIA Quadro GP107 (Pascal), 512 CUDA cores, 4GB GDDR5 memory
  • 2x 10G-KX4, 2x 10G-KR and 4x 1GbE
  • 1x PCIe x16 Gen3, 2x PCIe x4 and 1x PCIe x8 Gen3 to XMC

6U

VPX6100

Intel® Xeon® D-2187NT processor SoC, 16 cores 

Up to 16Gb DDR4 per node

  • Dual 10GBASE-KR and dual 1000BASE-KX ports per node
  • PCIe x16 Gen3 interface supporting non-transparent bridge  
  • 32GB SLC NAND SATA flash storage per node

6U

VPX6011

Intel® Xeon® processor D-1500 SoC with up to 12 cores

Up to 32Gb DDR4

  • Up to PCIe x16 Gen3 interface
  •  One XMC expansion slot, PCIe x8 Gen3 with rear I/O to P3

6U

VPX6020

Quad-core 7th gen Intel® Core™ i7 processor 

  • 16GB DDR4-2400 soldered ECC SDRAM

 

  • 4x SRIO 2.1 by 4
  • Configurable PCIe x16 Gen3 supporting NTB
  • 2x 1000BASE-T and 2x 1000BASE-BX  

6U

VPX6000

Dual Quad-Core 4th generation Intel® Core™ i7

Dual channel DDR3L ECC memory soldered, 16GB per node

  • Supports three independent displays
  • Supports storage upgrade via mezzanine card
  • Remote management support

6U

 

Model

CPU

RAM

Key features

Form factor

VPX3-P5000 Series

NVIDIA Pascal architecture GP104/GP107 GPU with up to 2048 CUDA cores

Up to 16GB GDDR5 Memory with NVIDIA GPUDirect™ DMA technology

  • PCIe x16 Gen3 to P1
  • Four DisplayPort 1.4 outputs
  • A.I. training framework support TensorFlow, Pytorch, Caffe, MXNet, MATLAB, Chainer, PaddlePaddle
  • A.I. inference engine support TensorRT

3U

VPX-TF3090

3U VPX test frame compliant with VITA 46 and OpenVPX standard

 
  • 3U VPX test frame compliant with VITA 46 and OpenVPX standard
  • Up to 9 slots for 3U VPX conduction cooled blades
  • Enables board-to-board communication validation
  • Optional 3-slot backplane
  • Standard BIOS and firmware

3U

 

Laptop keyboard

Enquire

Submit your enquiry directly to one of our Technical Sales Specialists.

Alternatively call our Sales Team.

Mandatory fields*

Max 5MB upload (.doc/.docx, .xls/.xlsx, .csv, .pdf)

In submitting this enquiry form you confirm you have read and agree to our Privacy policy

Embedded-computing-Technology-Centre

The Embedded Computing Technology Centre drives advanced solutions, so you can deliver the technologies of tomorrow - today.

Image
Embedded-computing-Technology-Centre


Design customer driven systems, build prototypes and manufacture products to meet your distinct needs. Many of the platform-based technologies that we offer were designed with customisation in mind.

Our capabilities help us to offer solutions across all stages of your project. Whether your requirements are standard, modified or highly customised, our experts support and identify your aims and work to ensure that we provide a solution that fits.

Call an expert today

Associated technologies

Power supplies

High-quality power solutions and industrial power supplies to help you deliver your technical project.

Communications

Discover our range of communications technology solutions to help your business thrive in the connected market.

Sensors

Discover our sensor solutions and custom sensor products to help you deliver your technical project with our wealth of technology expertise.

Interconnect

Discover our interconnect solutions to help your business thrive in the connected market. Offering a full range of interconnect cables and much more.