High Voltage Amplifiers and Piezo Drivers
Supplier: Trek Inc. (Advanced Energy)
Technology type: High Voltage Amplifiers and Piezo Drivers
Trek’s high-voltage power amplifiers employ unique and proprietary circuitry to produce a closed-loop amplifier system that features exceptional DC stability and excellent wideband performance characteristics. Featuring all-solid-state construction, Trek's amplifiers are fully protected against arc-over and operation into short circuits. Trek power amplifiers employ a unique four-quadrant class AB high-voltage output stage which is constructed using MOS power transistor devices in a proprietary multidevice cascode connection. This cascode connection provides tight voltage and power-sharing across all devices in the cascode array to yield exceptional MTBF reliability performance.
Range features
A high level overview of what this range offers
- Voltage ranges to ± 50kV
- Small signal bandwidth to 350kHz
- Slew rates to 1000V/μs
- Gain stability to ±10ppm/°C
- Full 4-quadrant, class AB
- Noise less than 0.005% of the full scale
Theory of operation
As the closed-loop amplifier system's stability depends on the feedback voltage divider stability over time, temperature, and humidity, Trek employs an advanced thin film resistance technology in its feedback dividers. The signal from the feedback divider, being a precision-divided representation of the amplifier output signal, is used to provide a low-level voltage monitor signal and to complete the feedback loop by comparing the divider output against the amplifier input signal in a high-gain integrating stage (A). The output of the integrating stage is used to drive optical couplers connected to the output stage cascode connected MOS device arrays, thus closing the feedback loop. To generate the high-voltage required by the output stages, high-voltage, high-frequency switching type power supplies are typically used.
What's in this range?
All the variants in the range and a comparison of what they offer
Piezo drivers and amplifiers <5kV
Model |
Output voltage |
Output current (DC or peak AC) |
Slew rate (>) |
Large signal bandwidth (DC to >) |
Small signal bandwidth (DC to >) |
---|---|---|---|---|---|
601C-1 |
0 to ±500V |
0 to ±10mA DC or ±20mA peak AC |
50V/µs |
8kHz (1% distortion) |
30kHz (-3dB) |
623B |
0 to ±2kV |
0 to ±40mA |
300V/µs |
10kHz (1% distortion) |
40kHz (-3dB) |
677B |
0 to ±2kV |
0 to ±5mA |
15V/µs |
1.2kHz (1% distortion) |
5kHz (-3dB) |
609E-6 |
0 to ±4kV |
0 to ±20mA |
150V/µs |
13kHz (-3dB), 6kHz (1% distortion) |
35kHz (-3dB) |
2205 |
0 to ±500V |
0 to ±40mA DC or ±80mA peak AC |
150V/µs |
75kHz (-3dB) |
100kHz (-3dB) |
2210 |
0 to ±1kV |
0 to ±20mA DC or ±40mA peak AC |
150V/µs |
40kHz (-3dB) |
100kHz (-3dB) |
2220 |
0 to ±2kV |
0 to ±10mA DC or ±20mA peak AC |
100V/µs |
7.5kHZ (-3dB) |
50kHz (-3dB) |
2100HF |
0 to ±150V |
0 to ±300mA |
2000V/µs |
2.6MHz (-3dB) |
3MHz (-3dB) |
PZD350A-1 |
0 to ±350V |
0 to ±200mA |
550V/µs |
250kHz (-3dB) |
350kHz (-3dB) |
PZD350A-2 (2-channel amp) |
0 to ±350V |
0 to ±200mA |
550V/µs |
250kHz (-3dB) |
350kHz (-3dB) |
PZD350A M/S |
0 to ±350V |
0 to ±400mA |
500V/µs |
250kHz (-3dB) |
350kHz (-3dB) |
PZD700A-1 |
0 to ±700V |
0 to ±100mA |
380V/µs |
125kHz (-3dB) |
200kHz (-3dB) |
PZD700A-2 (2-channel amp) |
0 to ±700V |
0 to ±100mA |
380V/µs |
125kHz (-3dB) |
200kHz (-3dB) |
PZD700A M/S |
0 to ±700kV |
0 to ±200mA |
370V/µs |
150kHz (-3dB) |
200kHz (-3dB) |
PZD2000A |
0 to ±2kV |
0 to ±200mA DC or ±400mA peak AC |
750V/µs |
60kHz (3% distortion) |
100kHz (-3dB) |
High voltage amplifiers ≥5kV
Model |
Output voltage |
Output current (DC or peak AC) |
Slew rate (>) |
Large signal bandwidth (DC to >) |
Small signal bandwidth (DC to >) |
---|---|---|---|---|---|
5/80 |
0 to ±5kV |
0 to ±80mA |
1000V/µs |
50kHz (3% distortion) |
75kHz (-3dB) |
PD05034 |
0 to ±7.5kV |
0 to ±50mA DC or, ±160mA peak AC |
1000V/µs |
15kHz (1% distortion) |
75kHz (-3dB) |
609B-3 |
0 to ±10kV |
0 to ±2mA |
30V/µs |
400Hz (1% distortion) |
10kHz (-3dB) |
610E |
0 to ±1kV, 0 to ±10kV |
0 to ±200µA, 0 to ±2000µA |
35V/µs |
1.2kHz (-3dB), 600Hz (1% distortion) |
10kHz (-3dB) |
10/10B-HS |
0 to ±10kV |
0 to ±10mA DC or ±40mA peak AC for 1ms |
700V/µs |
19.5kHz (-3dB), 9.5kHz (1% distortion) |
60kHz (-3dB) |
10/40A-HS |
0 to ±10kV |
0 to ±40mA or ±120mA peak AC for 1ms |
900V/µs |
23kHz (-3dB), 9kHz (1% distortion) |
25kHz (-3dB) |
20/20C |
0 to ±20kV |
0 to ±20mA |
450V/µs |
7.5kHz (-3dB), 3.75kHz (1% distortion) |
20kHz (-3dB) |
20/20C-HS |
0 to ±20kV |
0 to ±20mA or ±60mA peak AC for 1ms |
800V/µs |
5.2kHz (1% distortion) |
20kHz (-3dB) |
30/20A |
0 to ±30kV |
0 to ±20mA |
550V/µs |
2.5kHz (2% distortion) |
30kHz (-3dB) |
40/15 |
0 to ±40kV |
0 to ±15mA |
350V/µs |
1.4kHz (2% distortion) |
20kHz (-3dB) |
50/12 |
0 to ±50kV |
0 to ±12mA |
350V/µs |
1.4kHz (2% distortion) |
20kHz (-3dB) |
Downloads
Enquire
Submit your enquiry directly to one of our Technical Sales Specialists.
Alternatively call our Sales Team.
Mandatory fields*
The ability of our engineers to continually deliver leading edge custom power supply solutions to you is propelled by the Power Supply Technology Centre.
Every device needs power but with a huge variety of features and specifications available it can be difficult to determine the right product for you. With this service, the possibilities are endless.
Whether you’re looking to modify or configure a standard product, integrate it into a custom design, or design and modify a rack, chassis or PCB - we can support with the design, manufacturing, testing and integration of your tailored solution.