Italy
LightSpion
Supplier: Viso Systems
Technology type: Light Test and Measurement
The portable LightSpion allows the measurement of light source up to 8cm within 30 seconds. The measurement of light source can be lengthened to 22cm with the LightSpion extender. The LightSpion calculates light distributions, all colour data (for example CRI, CCT, TM30), colour over the angle, Lumens and LDT/IES files. The Viso goniospectrometer makes the need for an integrating sphere redundant. With a high-speed power analyser built-in, the voltage and current can be calculated instantly allowing for power consumption and lumen per watt efficiency to be efficiently calculated. With built in drivers and power analyser, the Viso goniospectrometer connects to a laptop and computer via USB allowing you to obtain results in 30 seconds.
Once unfolded out of the case, the LightSpion is connected to a pre-calibrated spectrometer with a wavelength range for visible light 360-800 nm. On the other side of the case is a fold-out goniometer the which creates a path length of 66cm. The LightSpion measures the full visible spectrum from the light source and compiles a full 360 ° photometric field distribution in two c-planes.
The LightSpion key features include:
- Measures Lumen, LDT, IES files, all colour data (for example CRI, CCT, TM30) and colour over the angle
- Completes a c-plane measurement in 30 seconds
- The LightSpion does not need a darkroom to process results
- With a weight of 5 kg, the LightSpion can be easily carried
- Requires no expert knowledge straightforward and easy to use
- The Viso Light Inspector software can be download from Viso Systems website, with an intuitive interface which shows all measured data and graphics to give you a fast overview.
Range features
A high level overview of what this range offers
- LightSpion Dimensions (L x W x H) 430 x 115 x 335 mm, ( with extender 1000 x 360 x 210 mm)
- Weight 5 kg, (with extender 7 kg)
- Measurement method: far field, type C horizontal
- Spectrometer range: 350 - 800 nm
- Sensor distance range: 66 cm
- Lamp diameter range: 0 – 8 cm (with extender 0 – 22cm)
- Lamp maximum weight: 1 kg (with extender 4 kg)
- Lumen and candela accuracy: LED < ±4%, other types < ±7.8%
- Colour temperature range: 1,000 K - 10,000 K < ±35 K
- Colour rendering index: Up to 100 < ±0,7
- Resolution, standard – highest: 7.5 Degrees/Step - 0.1 Degrees/Step (auto-detect)
- Number of c-planes: 2 (fixed) + 6 (manual)
- Spectrometer type /detector: STS Ocean Optics / Panavision ELIS-1024
- Calibration / re-calibration: fully calibrated plug and play solution / min. every two years
- Power analyser range: 0 - 3 A / 0 - 600 W @230 VAC / 0-300 W @110 VAC
- Input power: 90 -260 VAC, 50/60 Hz.
What's in this range?
All the variants in the range and a comparison of what they offer
|
Model |
Accessories Description |
System Compatible with |
|---|---|---|
|
LightSpion Extender |
The Lightspion extender attaches to the LightSpion. The extender allows distance necessary for measuring light sources up to 22 cm in diameter with a max weight of 5 kg with manual rotation of the lamp in 45-degree steps or up to 8 c-planes. |
Lightspion |
|
LabFlicker |
The LabFlicker connects directly to the Viso Light Inspector software as a stand-alone device. The LabFlicker calculates SVM, PstLM, flicker percentage, flicker index, flicker frequency and JA8 flicker data in real-time. When used with the other Viso Sytems allows corporation of all photometer in one report. |
LabSpion, Basespion and Lightspion. |
|
LabTemp |
The LabTemp hub logs the temperature via standard temperature probes, allowing up to 3 probes. The LabTemp can be mounted on to all steel surfaces via strong permanent magnets. |
LabSpion, Basespion and Lightspion |
|
CALI-T50 |
The Cali-T50, a tungsten irradiance reference lamp with auto ramp-up power supply. The reference lamp is used to recalibrate/verify the calibration of the Viso Systems in house. It mounts easily on the LabSpion, Basespion and Lightspion. The Cali-T50 comes with the LabSpion. |
LabSpion, Basespion and Lightspion |
Downloads
Enquire
Submit your enquiry directly to one of our Technical Sales Specialists.
Alternatively call our Sales Team.
Mandatory fields*
When resource or capacity is limited, you can depend upon our knowledge and dedicated Technology Centres to support you from concept through to production.
We provide access to a large range of specialist services and capabilities across our specialist technologies, enabling you to build tailored solutions and bring your concept to reality. Discover how we can support you through our dedicated centres.
Call an expert today
Associated technologies
Imaging
Sensors
Communications
