Ferrites for EMI suppression
Hersteller: Ferroxcube
Technologie-Typ: Ferritkerne
EMI suppression is a critical point in electronic/electric products that engineers need to consider in the early stages of product development. High permeability ferrites offer the best solution in terms of efficiency and cost.
Working temperature, flux density, high impedance, and initial permeability are key parameters to select the proper material.
Ferrites in this range are made of both alloys, manganese zinc (MnZn) and nickel-zinc (NiZn) at a slightly higher cost solution.
Shapes that typically are used in this application are toroids and U for CMC, cable shields, beads, rods, and balun.
Material names in this range start with 3Ex. Examples are 3E10 and 3E65 covering a range of permeability 5K to 15K; or with 3Sx like 3S4, optimised for frequencies from 10MHz up to 300MHz; or 4Sx like 4S3, made of NiZn for range 30MHz to 1GHz.
Eigenschaften
- Medium cost materials (NiZn & MnZn)
- Development trend:
- Increase frequency range for high impedance
- Increase permeability stability through temperature
- Increase Bsat VS Temp - Available shapes: toroids, E, U, BD, BDS, BDW, MLS, CMS, RODs, cable shields, WBS, and WBC
- Permeabilities above 4000 for 3Ex
- Low permeabilities for 3Sx and 4Sx
- Low Curie temperature: between 110°C and 255°C
- 3Ex series also used for wideband signals, pulse transformers, and delay lines
Verfügbare Modellvariationen
Alle verfügbaren Varianten und ein Vergleich ihrer Spezifikationen
High permeability materials
Material |
µi at 25°C |
Bsat (mT) at 25°C |
Tc (°C) |
Ferrite type |
Notes |
---|---|---|---|---|---|
3C11 |
4300 |
390 |
>= 125 |
MnZn |
Frequency < 30MHz |
3E65 |
5200 |
480 |
>= 165 |
MnZn |
Frequency < 20MHz |
3E25 |
6000 |
390 |
>= 125 |
MnZn |
Frequency < 20MHz |
3E27 |
6000 |
430 |
≥ 150 |
MnZn |
Frequency < 20MHz |
3E26 |
7000 |
430 |
≥ 155 |
MnZn |
Frequency < 20MHz |
3E10 |
10000 |
460 |
≥ 130 |
MnZn |
Frequency < 20MHz |
3E6 |
10000 |
460 |
≥ 130 |
MnZn |
Frequency < 15MHz |
3E12 |
12000 |
470 |
≥ 130 |
MnZn |
Frequency < 15MHz |
3E15 |
15000 |
470 |
≥ 130 |
MnZn |
Frequency < 15MHz |
Low permeability materials
Material |
µi at 25°C |
Bsat (mT) at 25°C |
Tc (°C) |
Ferrite type |
Notes |
---|---|---|---|---|---|
3B1 |
900 |
380 |
≥ 150 |
MnZn |
|
3S1 |
4000 |
400 |
≥ 125 |
MnZn |
Frequency < 30MHz |
3S3 |
350 |
320 |
≥ 225 |
MnZn |
Frequency < 200MHz |
3S4 |
1700 |
320 |
≥ 110 |
MnZn |
Frequency < 100MHz |
3S5 |
3800 |
545 |
≥ 255 |
MnZn |
Frequency < 30MHz |
4B1 |
250 |
360 |
≥ 250 |
NiZn |
Frequency < 300MHz |
4S2 |
850 |
340 |
≥ 150 |
NiZn |
Frequency < 100MHz |
4S2F |
700 |
290 |
≥ 120 |
NiZn |
Frequency < 100MHz |
4S3 |
250 |
360 |
≥ 250 |
NiZn |
Frequency < 300MHz |
4S60 |
2000 |
260 |
≥ 100 |
NiZn |
Frequency < 50MHz |
Anfrage senden
Senden Sie Ihre Anfrage direkt an einen unserer technischen Vertrieb.
Oder rufen Sie unser Vertriebsteam an.
Pflichtfelder*
Innerhalb des Magnetics Products Technology Centre bieten wir eine Reihe von Dienstleistungen an, die bei der Erstellung kundenspezifischer Lösungen helfen.
Mit dem größten Team von Spezialisten für den technischen Support in Europa stehen wir an der Spitze eines konstruktionsgeleiteten Ansatzes, um anspruchsvolle und kundenspezifische Lösungen für Magnetkerne oder Komponenten für die Produktion zu liefern.
Ob Ihr Bedarf einfach oder komplex ist, wir können eine Lösung entwickeln, um Ihre Ziele zu erreichen. Mit unseren Experten im Haus können wir Prototypen entwerfen, entwickeln und testen, die die Leistungs- und Umweltanforderungen Ihrer Anwendung erfüllen.