Amorphous magnetic shields
- Technology
- EMI shielding materials
- Partner
- Toshiba
Made of co-based amorphous magnetic steel, surrounded by 2 double-sided sticky tape and externally protected with 2 layers of PET film. These sheets are used for purposes such as radiation noise shields in electronic devices (SS Series).
Basic magnetic material has a relative permeability of 18,000 at 100KHz and offers a higher relative permeability in the low hand of the frequency spectrum (30KHz-1MHz) versus other sheets made of powder magnetic materials, achieving a better shielding result.
Sheets thickness of 63um, excluding PET protective films, complete the characteristics. The PET film will be removed upon installation.
Range features
A high level overview of what this range offers
- Made with SS sheet with high magnetic permeability
- Relative permeability: 18,000 at 100kHz
- Amorphous cobalt type
- Higher relative permeability in low-frequency bands (30kHz-1MHz) than magnetic powder sheets
- Best shielding effect
- Co based Amorphous’s hardly ever rusts unlike Fe based materials
- Lightweight with a thickness of just 63μm (excluding PET release)
- Magnetic shields from metals
- Best shielding performance in the range of 30KHz to 1MHz
- Magnetic shields for terminal devices such as tablets, digitizers and smartphones
- Failure prevention for various electrical converters and sensors.
- RFID, smart keys and low frequency radio devices including wave clocks
