FSP600-80PSA(SK) 600W PS2/ATX Industrial AC/DC Switching Power Supply
- Technology
- IPC industrial computer power supplies
- Partner
- FSP Protek
The FSP600-80PSA(SK) is an industrial-grade 600 W ATX power supply designed for high reliability and easy integration. It supports a full-range 90–264 VAC input and uses active PFC for improved power quality and stable operation. With 80 PLUS Bronze certification, it offers efficient power conversion with reduced waste heat. The robust design supports continuous operation at ambient temperatures up to 50 °C. It provides standard ATX output rails including +3.3 V, +5 V, multiple +12 V rails, -12 V, and +5 Vsb, with an optional -5 V rail for legacy needs. Built-in protection features help safeguard connected systems in demanding environments. Its PS/2 ATX form factor allows straightforward integration into standard chassis. The unit is well suited for servers, advanced workstations, communication systems, and industrial automation equipment. Compliance with international safety and EMC requirements supports deployment in professional and industrial applications.
Range features
A high level overview of what this range offers
- 80 PLUS Bronze efficiency – Improves energy savings and reduces waste heat for cost-effective continuous operation.
- Active PFC – Enhances input power factor, reduces harmonics, and supports better power quality.
- Wide 90–264 VAC input range – Enables reliable use on global mains supplies without manual switching.
- Standard PS/2 ATX form factor – Simplifies installation and replacement in common ATX-compatible chassis.
- Internal 80 mm cooling fan – Provides effective thermal management for stable performance under load.
- Low ripple and noise outputs – Helps protect sensitive components and supports system stability.
- Comprehensive protection circuits – Includes OCP, OVP, OTP, and SCP for improved equipment safety.
- Resettable shutdown behavior – Allows recovery after fault removal without fuse replacement.
- 100% burn-in at 50 °C – Strengthens reliability for industrial and high-temperature environments.
- Hi-pot isolation tested – Verifies insulation integrity for safe industrial operation.
- 100,000-hour MTBF – Supports long service life in 24/7 applications.
- Standard ATX DC outputs with optional -5 V – Covers modern system requirements and selected legacy applications.
Downloads
for FSP600-80PSA(SK) 600W PS2/ATX Industrial AC/DC Switching Power Supply
What’s in this range?
All the variants in the range and a comparison of what they offer
Specification | Value |
Output Power | 600 W continuous |
Efficiency | 80 PLUS Bronze |
AC Input | 90–264 VAC, 47–63 Hz, active PFC |
DC Outputs | +3.3 V @ 25 A; +5 V @ 25 A; +12 V1 @ 16 A; +12 V2 @ 16 A; +12 V3 @ 16 A; +12 V4 @ 16 A; -12 V @ 0.5 A; +5 Vsb @ 4 A; -5 V optional @ 0.1 A |
Combined Limits | +3.3 V and +5 V combined max 150 W |
Hold-up Time | ≥ 16 ms at 115 V / 60 Hz and 230 V / 50 Hz |
Protection Circuits | OCP, OVP, OTP, SCP |
Operating Temperature | 0 °C to 50 °C |
Storage Temperature | -20 °C to 80 °C |
Operating Humidity | 85% RH non-condensing |
Storage Humidity | 95% RH non-condensing |
MTBF | 100,000 hours of continuous operation at 25 °C, max output load |
Dimensions (L × W × H) | 140 × 150 × 86 mm |
Operating Altitude | Up to 5,000 meters above sea level |
Applications | Workstation, storage system, IPC controller |
Safety / Compliance | CB 62368-1, CB 60950-1, 80 PLUS Bronze |
FAQs
for FSP600-80PSA(SK) 600W PS2/ATX Industrial AC/DC Switching Power Supply
It supports a full AC input range from 90 V to 264 V at 47–63 Hz. This allows operation on standard 115 V and 230 V mains without manual voltage selection. Active PFC helps maintain efficient and stable performance across the entire range.
The unit is 80 PLUS Bronze certified, which indicates solid power conversion efficiency and reduced waste heat compared with lower-efficiency power supplies. This helps lower energy consumption and supports cooler, more reliable long-term operation.
The PSU provides +3.3 V, +5 V, +12 V1, +12 V2, +12 V3, +12 V4, -12 V, and +5 Vsb outputs. An optional -5 V rail is also available for selected legacy applications.
It includes Over-Current Protection (OCP), Over-Voltage Protection (OVP), Over-Temperature Protection (OTP), and Short-Circuit Protection (SCP). These features help protect both the power supply and connected equipment during abnormal operating conditions.
Yes. It is designed for industrial use and supports continuous operation at ambient temperatures up to 50 °C. The built-in fan, burn-in testing, and protection circuitry all contribute to reliable operation in servers, workstations, communication systems, and automation equipment.
The power supply uses a standard PS/2 ATX form factor with dimensions of 140 × 150 × 86 mm. This makes integration straightforward in chassis designed for standard ATX power supplies.
