MB Series Blackbody Systems
- Technology
- IR blackbodies and test systems
- Partner
- Santa Barbara Infrared (SBIR)
MB series blackbody systems support single or multi non-uniformity correction test requirements. The blackbody temperature setpoint between 0°C and 90°C is set through IRWindows™ Lite software. This temperature setpoint value is stored in the system’s non-volatile memory, so no further PC connection is required after the initial temperature configuration.
SBIR’s MB Series blackbody systems are used as sources for non-uniformity correction (NUC) and for calibration of IR sensors.
![MB Series Blackbody Systems](https://acalbfi.b-cdn.net/media/png/SBIR_MB-Series-Side_PI.png)
Range features
A high level overview of what this range offers
- 0°C to 90°Csettable temperature range
- 4” square emitting aperture
- Temperature accuracy of ±1°C
- ±0.1°C temperature stability
- NIST traceable calibration
What’s in this range?
All the variants in the range and a comparison of what they offer
Model | Emitting surface area | Temperature range |
---|---|---|
MB-04 | 4’’ x 4’’ | 0°C to 90°C |