Nanoperm Nanokristalline Kerne

Nanokristalline Kerne sind unverzichtbar für EMI-Anwendungen, hauptsächlich für Gleichtaktdrosseln (CMC) für hohe Nenn- und asymmetrische Ströme. Magnetec bietet eine einzigartige Kombination von Nanoperm-Kernen zur Reduzierung der Motorlagerströme in Inverter-Motor-Systemen (bis zu 1200 kW) mit langen Kabeln.

Die CoolBlue-Serie wurde speziell entwickelt, um wie ein CMC (auch als induktiver Absorber bezeichnet) verwendet zu werden, bei dem alle Phasen des Motorkabels oder der Sammelschienen durch den Kern gezogen werden. NaLA-Kerne reduzieren hochfrequente Störungen weiter, wenn sie über jede einzelne Phase gelegt werden. Da normalerweise keine Wicklung angewendet wird, sind Installation oder Nachrüstung einfach (stapeln Sie so viele Kerne wie nötig zur Geräuschreduzierung) und sparen Wartungs- und Ersatzkosten.

Nanoperm Nanokristalline Kerne

Eigenschaften

  • Cores easy to install (cables or wires, bus bars pulled through) in inverter-motor systems
  • CoolBlue: medium permeability of 30.000 to ensure high saturation currents when used as CMC; available as toroids and oval cores
  • NaLA: high permeability 60.000 – 90.000 for high impedance; available as toroids
  • Designed for cable lengths up to several hundred metres and motor power up to 1200kW
  • Cores in plastic cases for operational temperature up to 130°C
  • Oval shapes available

Downloads

für Nanoperm Nanokristalline Kerne

pdf
Magnetec cased EMC core selection matrix
Download
pdf
Magnetec CoolBlue tape wound cores to reduce motor bearing currents
Download
pdf
Magnetec NaLA tape wound cores to reduce motor bearing currents
Download

EMV-Kerne basierend auf nanokristallinem Nanoperm®-Material

Nom dimensionsµr~ca.Isat (A)min (Al) @10KHz (µH)Lfe (cm)Afe (cm2)

16 x 10 x 6

1K – 90K

32 – 0.4

0.28 – 30

4

0.125

20 x 12 x 8

1K – 90K

40 – 0.5

0.39 – 33

5.11

0.24

25 x 20 x 10

1K – 90K

56 – 0.6

0.24 – 22.5

7.04

0.19

25 x 16 x 10

1K – 90K

50 – 0.6

0.47 – 43

6.33

0.35

30 x 20 x 10

1K – 90K

62 – 0.7

0.43 – 40

7.75

0.38

40 x 32 x 15

1K – 90K

90 – 1

0.335 – 33

11.26

0.47

40 x 25 x 15

1K – 90K

80 – 0.9

0.74 – 76

10.03

0.8

45 x 30 x 20

1K – 90K

92 – 1

0.9 – 75

11.6

1.2

50 x 40 x 20

1K – 90K

112 – 1.2

0.47 – 40

13.9

0.73

50 x 40 x 25

1K – 60K

112 – 2

0.58 – 34.4

14.08

0.91

63 x 50 x 30

1K – 60K

140 – 2.5

0.81 – 43.7

17.67

1.44 – 1.60

80 x 63 x 30

1K – 60K

180 – 3

0.75 – 45.8

22.36

1.86

100 x 80 x 30

1K – 60K

220 – 4

0.70 – 42.4

28.16

2.25

130 x 100 x 30

1K – 60K

290 – 5

0.82 – 48

35.92

3.33

160 x 130 x 30

1K – 60K

362 – 6

0.68 – 37.7

44.98

3.5

200 x 175 x 30

1K – 60K

470 – 8

0.41 – 24.9

58.82

2.74

300 x 250 x 30

1K – 60K

688 – 11

0.56 – 28.6

86.4

4.7

CoolBlue-Bandkerne zur Reduzierung von Motorlagerströmen

TypesNom dimensionsAl @10KHzAl@100KHzLeAfe

Toroidal

30 x 20 x 10 – 500 x 450 x 30

13.6/27.2 – 8.0/20.0

>6.70 – 7.20

7.8 – 149.1

0.36 – 5.60

2.0 – 40

Oval

50 x 40 x 20 – 300 x 254 x 30

12.6/28.4 – 15.8/31.5

>6.30 – >7.90

14.1 – 87.1

0.8 – 5.20

3.5 – 23

Toroidal

16 x 11 x 5 – 160 x 130 x 30

18.4/36.8 – 37.7/75.3

>4.6 – >13

4.14 – 45.39

0.1 – 3.24

Kontaktieren Sie uns

Für weitere Informationen und Verfüg­barkeiten können Sie uns gerne sofort kontaktieren. Oder füllen Sie einfach unser Kontaktformular aus, damit sich ein Mitglied unseres Vertriebs­teams bei Ihnen melden kann.

Pflichtfeld: bitte geben Sie Ihre Telefonnummer an.

Mit dem Absenden dieses Anfrageformulars bestätigen Sie, dass Sie unsere Daten­schutzrichtlinie gelesen haben und damit einverstanden sind.

There was an error while sending the form. Please try again.
CoolBlue cores to reduce damaging motor bearing currents