NPA Series Surface Mounted Pressure Sensors
- Technology
- Board mounted pressure sensors
- Partner
- Amphenol Advanced Sensors
Amphenol NPA Series of Surface-Mount pressure sensors come in a miniature size that offers a cost-effective solution for applications that require calibrated performance. Packaged in a SOIC14 pin surface mount, the NPA Series is available in gauge, absolute and differential pressure ranges with either mV, amplified analogue or digital outputs. The sensor is intended for printed circuit board mounting and delivered in tape and reel form to simplify manufacturing handling.

Range features
A high level overview of what this range offers
- Surface-mountable
- Differential, gauge, absolute and low pressure
- 2” H2O to 30 PSI full scale
- Output Options: Amplified Analog, Digital Serial (14bit), Digital I2C, Uncalibrated mV
- On-chip temperature sensor in digital mode
- Operating temperature range of -40°C to 125°C
- Total Error Band < ±1.5% FSO; ±-2.5% FSO at 2" H2O
- Up to 60 psi proof pressure
What’s in this range?
All the variants in the range and a comparison of what they offer
NPA Series | |
---|---|
Signal Output | mV Output, Ratiometric Uncalibrated Sensor Analog Amplified Output, 3,3Vdc Excitation, calibrated Sensor Analog Amplified Output, 5Vdc Excitation, calibrated Sensor Zacwire – Digital Serial Output, Calibrated Sensor, 2 byte Zacwire – Digital Serial Output, Calibrated Sensor, 3 byte I2C – Digital Output, 3,3Vdc Excitation, Calibrated Sensor, 2 byte I2C – Digital Output, 5Vdc Excitation, Calibrated Sensor, 2 byte |
Port Type | 1 manifold port for Gauge and Absolute pressure types 2 barbed ports for Gauge, Absolute and Differential pressure types Non ported |
Pressure Range | 10”H2O (2.5 kPa) 1 PSI (7 kPa) 5 PSI (35 kPa) 15 PSI (100 kPa) 30 PSI (200 kPa) |
Pressure Type | Gauge Differential Absolute (15 PSIA and 30 PSIA only) |