MPR Series Pressure Sensors
- Technology
- Board mounted pressure sensors
- Partner
- Honeywell
Very small form factor: Enables portability by addressing weight, size, and space restrictions; occupies less area on the PCB.
Wide pressure ranges simplify use.
Enhances performance: Output accelerates performance through reduced conversion requirements and direct interface to microprocessors.
Value solution: Cost-effective, higher volume solution with configurable options.
Low power/energy efficiency: Reduces system power requirements and enables extended battery life.

Range features
A high level overview of what this range offers
- 5 mm x 5 mm [0.20 in x 0.20 in] package footprint
- Calibrated and compensated
- ±40 mbar to ±2.5 bar | ±4 kPa to ±250 kPa | ±0.6 psi to ±30 psi
- 24-bit digital I2C or SPI-compatible output
- IoT (Internet of Things) ready interface
- Low power consumption (<10 mW typ.), energy efficient
- Stainless steel pressure port
- Medical and food grade gel options
- Compatible with a variety of liquid media
- Absolute and gage pressure types
- Total Error Band after customer auto-zero: As low as ±1.5 %FSS
- Compensated temperature range: 0ºC to 50ºC [32ºF to 122ºF)
- REACH and RoHS compliant
- Meets IPC/JEDEC J-STD-020D.1 Moisture Sensitivity Level 1
What’s in this range?
All the variants in the range and a comparison of what they offer
MPR-Series | |
---|---|
Output Type | SPI I2C, Address 0x08 I2C, Address 0x18 I2C, Address 0x28 … I2C, Address 0x88 |
Pressure Port | Long, Short |
Gel | None; Silicone gel; Food grade gel; Fluorsilicone gel |
Pressure Ranges | Absolute Ranges: 0…1 bar to 0…2,5 bar; 0…100 kPa to 0…250 kPa 0…15 PSI to 0…30 PSI Gauge: 0…40 mbar to 0…2,5 bar 0…4 kPa to 0…250 kPa 0…1 PSI to 0…30 PSI Other calibration units: InH2O; MPa; HPa; cmH2O; mmHg |