CM Series NDIR Sensors

NDIR technology represents a reliable and accurate method to measure CO2 concentration in the air. The measurement principle is based on the light absorption at specific wavelengths due to gas presence. The key advantage is that there is a negligible cross-sensitivity to other gases/humidity, which is a common problem for traditional semiconductor / electrochemical cells. NDIR sensors provide a very long, reliable life expectancy.

The CM series have single, dual-beam and a new ‘dual-IR’ structure. In the ‘dual-IR’ structure two IR light sources are present, so that longer lifetime, less drift and better stability is achievable.

CM Series NDIR Sensors

Range features

A high level overview of what this range offers

  • High accuracy, long life (>10 years estimated)
  • No need for re-calibration/maintenance
  • Single beam (one IR emitter and one detector) or dual-beam (one IR emitter and two detectors, one for measurement and one for reference)
  • Available new ‘dual-IR’ structure for even longer life-time expectation (more than 15yrs)
  • PWM/UART/I2C signal output
  • Connector for PCB mounting with easy installation
  • UART, I2C, PWM output
  • Super low-power version available for battery operation in portable instruments
  • Small size
  • Typical applications are for automatic ventilation systems for HVAC, Indoor air quality monitors, iot devices, smart agriculture, air purifier

What’s in this range?

All the variants in the range and a comparison of what they offer

ModelMeasurement rangeInternal structureAccuracyConsumptionCommunication protocol

CM1106-C

400-5000ppm

Single beam (with ABC logic)

+/- (50ppm + 5% reading)

<45mA @ 1s

UART / I2C / PWM

CM1106LS

400-5000ppm

Single beam (with ABC logic)

+/- (50ppm + 5% reading)

<35mA @ 1s

UART / I2C / PWM

CM1106SL-N

0-5000ppm

Single beam (with ABC logic)

+/- (50ppm + 5% reading)

<30uA @ 2min

UART

CM1107N

400-5000ppm

Dual beam

± (50ppm+3% of reading)

<50mA @ 1s

UART / I2C / PWM

CM1109

400-5000ppm

Dual IR

+/- (50ppm + 5% reading)

<70mA @ 1.25s

UART / I2C / PWM

CM1106H-NS

PWM:0-2000ppm, UART: 0-10,0000ppm

Single beam (with ABC logic)

+/- (30ppm + 3% of reading)

<50mA @ 1s

UART, TTL, PWM

CM1106S-W

0-5000ppm

Single beam (with ABC logic)

+/- (50ppm + 3% of reading)

<20mA @ 1s

UART, TTL, I2C

CM1106SL-NS

0-5000ppm

Single beam (with ABC logic)

+/- (50ppm +5% of reading)

<37uA

UART, TTL, I2C

CM1107NS

0-1000ppm

Dual beam

+/- (30ppm + 3% of reading)

<50mA @ 1s

UART, TTL, I2C, PWM

CM1107H

0-5% vol

Dual beam

+/- (0.02%, +10% of reading)

<50mA @ 1s

UART, TTL, I2C

Contact us

To request further information and availability please feel free to contact us right away.Or just fill out our contact form for a member of the sales team to respond to you.

Mandatory field: please enter your phone number.

In submitting this enquiry form you confirm you have read and agree to our privacy policy .

There was an error while sending the form. Please try again.