Unamplified Airflow Sensors
- Technology
- Airflow sensors
- Partner
- Honeywell
Unamplified sensors allow you to do your own amplification while retaining maximum resolution of the sensor’s output signal.
These sensors provide outstanding performance in a cost-effective sensor platform with accurate, repeatable flow sensing.
All airflow sensors operate on heat transfer — flow and differential pressure. Silicon chip design is created from thin-film, thermally isolated bridge structure, containing both heater and temperature sensing elements.
This provides rapid response to the air or gas flow and amount and direction, delivering a proportional output voltage.

Range features
A high level overview of what this range offers
- Advanced chip design, manufacturing techniques and microstructure technology
- Enhanced response time and low power consumption
- Variety of port styles provide greater application flexibility
- Temperature compensated output
- Stability, and repeatability
- Wide range of mounting options
- High accuracy
Downloads
for Unamplified Airflow Sensors
What’s in this range?
All the variants in the range and a comparison of what they offer
Series | Flow range | Output | Temperature range |
---|---|---|---|
AWM1000 | ±200 SCCM, 1000 SCCM to -600 SCCM, ±5,0 mbar [2.0 inH20] | analog | -25°C to 85°C [-13°F to 185°F] |
AWM2000 | ±30 SCCM, ±200 SCCM, ±1000 SCCM, ±5,0 mbar [2.0 inH20] | analog | -25°C to 85°C [-13°F to 185°F] |
AWM40000 | ±25.0 SCCM, 1.0 SLPM, 6.0 SLPM | analog | compensated: -25°C to 85°C [-13°F to 185°F] |
AWM90000 | ±200 SCCM, ±5,0 mbar [2.0 inH20] | analog | uncompensated: -25°C to 85°C [-13°F to 185°F] |