iLS600-R Series – Intelligent Laboratory Power Supplies
- Technology
- Programmable power supplies
- Partner
- Artesyn / Advanced Energy
Precision, power, and programmability for your bench
The Artesyn™ iLS600-R Series by Advanced Energy delivers 600 W of programmable, intelligent DC power in a compact 1U rack-mountable format. Designed for demanding laboratory, test, and industrial applications, this single-output series combines advanced measurement accuracy with high flexibility and remote connectivity.
With 12-bit D/A and A/D converters, integrated digital rotary controls, and support for USB, Ethernet, and analog interfaces, the iLS600-R Series ensures tight control and precise feedback. LXI certification guarantees seamless integration into modern test environments, while full OCP and OVP protection enhances safety and reliability.
Range features
A high level overview of what this range offers
- Compact and powerful 600 W programmable output
- Precision control and measurement with 12-bit converters
- Remote monitoring and control via USB, Ethernet, analogue
- Certified LXI compliance for automated test environments
- Ideal for series or parallel operation
- Built-in OVP/OCP protection for safe operation
- Supports digital wireless remote sense
- Suitable for a wide range of voltage and current outputs
- Lightweight and easily mountable
- Designed for accurate, repeatable test scenarios
- 600 W programmable output power in a 1U form factor
- 12-bit D/A & A/D for precise voltage/current control and monitoring
- Supports series and parallel operation for system scalability
- Built-in Over Voltage Protection (OVP) and Over Current Protection (OCP)
- LXI certified for seamless integration in automated test systems
- Rotary knobs for fine local control of voltage and current
- Wide output range: 30 V to 400 V, 2.5 A to 33 A
- Low ripple and noise for stable and clean output
- Compact, rack-mountable 1U package (2.7 kg / 6 lbs)
Downloads
for iLS600-R Series – Intelligent Laboratory Power Supplies
What’s in this Range?
| Model Number | Max Voltage (V) | Nominal Voltage (V) | Max Current (A) | Nominal Power (W) | Outputs |
|---|---|---|---|---|---|
iLS600-3-R | 30 | 30 | 33 | 600 | 1 |
iLS600-5-R | 50 | 50 | 20 | 600 | 1 |
iLS600-20-R | 200 | 200 | 5 | 600 | 1 |
iLS600-40-R | 400 | 400 | 2.5 | 600 | 1 |
FAQs
for iLS600-R Series – Intelligent Laboratory Power Supplies
You should choose the iLS600-R when you need up to 600 W of programmable DC power in a compact 1U rack-mountable format for laboratory, test or industrial applications where remote connectivity is key. The series is ideal when you want a single-output supply with precise control and easy integration into automated test systems, rather than a purely bench-focused instrument.
The iLS600-R delivers 600 W of programmable output power with a wide output range from 30 V up to 400 V and currents from 2.5 A to 33 A, depending on the model. It uses 12-bit D/A and A/D converters for precise voltage and current control and monitoring, and is designed for accurate, repeatable test scenarios in compact 1U rack-mount form.
The iLS600-R supports remote monitoring and control via USB, Ethernet and analogue interfaces, and is certified to LXI, which makes it straightforward to integrate into networked, automated test environments. You can combine local rotary controls for quick adjustments with full remote control from your test software, using the command set described in the Artesyn programming manual available in the downloads section.
Yes. The iLS600-R Series is designed for series and parallel operation to allow system scalability. This enables you to build configurations that deliver higher voltages or higher currents than a single unit, while still benefitting from the same 600 W building block and consistent control interface.
The iLS600-R includes built-in overvoltage protection (OVP) and overcurrent protection (OCP) to safeguard your device under test and the supply itself. It also offers low ripple and noise, ensuring a stable and clean output suitable for sensitive circuits, and supports digital wireless remote sense to maintain accurate voltage at the load.
Both ranges deliver 600 W with 12-bit precision, but the iLS600-R is optimised for rack-mount and system use with its 1U rack-mountable format and strong focus on LXI-based remote connectivity. The iLS600 bench series, by contrast, is designed for direct user interaction with front-mounted connectivity and front-panel controls, making it more convenient for hands-on lab work.
Pricing and lead times are provided on request. On the iLS600-R product page you can click “Request a quote” or use the contact form so that our sales team can respond with detailed pricing, availability and any project-specific options for your region.
