AIF-500 Series AC-DC full-brick module
- Technology
- PCB AC-DC power supplies
- Partner
- Artesyn / Advanced Energy
Advanced Energy’s Artesyn AIF-500 series, 500 W AC-DC Full Brick module accepts a wide 90 to 264 VAC input.
This family of modules is particularly focused on providing contact-cooled applications such as I.P. sealed applications where the power converters are located inside the applications I.P. Sealed casing.
Rated at 504 W, the module has a high conversion efficiency of 93% typically and provides a nominal isolated output voltage of 12 VDC with a 10 V auxiliary output. Featuring an industry-standard 2.4 x 4.6 in fullbrick form factor and a height of only 0.55 in. The functions and features (such as internal inrush-limiting, active current-share, Auxiliary Output and PMBus) of this family have been provided to enable ease of use in applications with minimise external component requirements.
Range features
- Input voltage 90 – 264Vac
- Input voltage Frequency 47hz to 63hz
- Output Noise 120mV pk-pk max (12V version)
- Output voltage 12 Volts
- Output current 42 Amps
- Auxilary Output 10V at 250mA
- Hold-up HVDC 380Vdc
- Control Output voltage Adjust -20% to +10% Vout
- Isolation 4000Vdc Input to Output
- Isolation 2500Vdc Input to Baseplate
- Isolation 100Vdc Output to Baseplate
- Efficiency >91.5% low-line input
- Parallel unit capability Up to 10 units
- Thermal Derating 100% power at 100degC baseplate
- Efficiency >93.5% High-line input
Range benefits
- Input Inrush Internal Inrush limiting
- Control PMBus interface
- Control Output voltage sense
- Control Active current share
- Control PSU enable
- Control PSU-Good signal
Downloads
for AIF-500 Series AC-DC full-brick module
What’s in this range?
All the variants in the range and a comparison of what they offer
| Model Number | Format | Min. Voltage (V) | Max. Voltage (V) | Current (A) | Nominal Voltage (V) | Number of Outputs |
|---|---|---|---|---|---|---|
AIF11WAC-01N | 500W, 85-264Vin, Single, 48V@11A, Neg enable, 4.6" X 2.4" X 0.5" H, RoHS 6 | 44 | 56.6 | 11 | 48 | 1 |
AIF11WAC-01NT | 500W, 85-264Vin, Single, 48V@11A, Non-thread, 4.6" X 2.4" X 0.5" H, RoHS 6 | 44 | 56.6 | 11 | 48 | 1 |
AIF42BAC-01N | 500W, 85-264Vin, Single, 12V@42A, Neg enable, 4.6" X 2.4" X 0.5" H, RoHS 6 | 10.8 | 13.2 | 42 | 12 | 1 |
AIF42BAC-01NT | 500W, 85-264Vin, Single, 12V@42A, Non-thread, 4.6" X 2.4" X 0.5" H, RoHS 6 | 10.8 | 13.2 | 42 | 12 | 1 |
General product specifications:
| Specifications | Value |
|---|---|
Output Power (W): | 650 |
Length (Inches): | 6 |
Width (Inches): | 4 |
Height (Inches): | 1.54 |
Mounting Type: | Embedded PSU |
Minimum Output Current (A): | 0 (zero) |
Maximum Output Current (A): | 54.2 |
Output Voltage Range (V): | 12V to 52.8V |
Minimum Output Power (W): | 0 (zero) |
Maximum Output Power (W): | 650 |
Maximum Input Voltage (V): | 264 |
Warranty (Years): | 3 |
