Ferrites for linear filters and sensors
- Technology
- Ferrite cores
- Partner
- Magnetics Inc.
Magnetics Inc. C, E, and V materials have been designed to offer excellent properties for low-level signal applications.
These materials set standards for high-quality factor, long-term stability, and precise and adjustable inductance.
Applications for these materials include high Q filters, wideband transformers, pulse transformers, and RLC tuned circuits.
V material offering the highest permeability of this range works well for frequencies below 1.5MH.E material’s initial permeability of 2000 allows applications flat performance up to 3MHz while C with the lowest permeability can work easily till 8MHz (@ 50% roll-off) and offer the highest Tc.
Range features
A high level overview of what this range offers
- Medium permeabilities
- MnZn only ferrite materials
- Available in toroids and pot cores
- C material is for frequency applications < 8MHz
- V material is for high precision sensors
- E material is for a wide range of applications
Downloads
for Ferrites for linear filters and sensors
What’s in this range?
All the variants in the range and a comparison of what they offer
| Material | µi at 25°C | Bsat (mT) at 25°C | Tc(°C) | Resistivity ρ Ω*m | Notes |
|---|---|---|---|---|---|
C | 900 | 380 |
| 2 | Max Frequency (50% Roll-Off) < = 8MHz |
E | 2000 | 360 |
| 2 | Max Frequency (50% Roll-Off) < = 3MHz |
V | 2300 | 440 |
| 1 | Max Frequency (50% Roll-Off) < = 1.5MHz |
