EMProbe
- Technology
- EMC Pre-compliance Testing
- Partner
- Y.I.C. Technologies
EMProbe: Single probe, robotic arm
EMC/EMI issue testing is straightforward and accurate with 3D precision technology. The EMProbe is used to assist high-density board designers to use off-the-shelf hand-held probes and visualize the root causes of potential EMC and EMI problems during pre and post-EMC compliance testing.
An easy-to-use Robotic Arm controls the movement of the probe in any direction and an external Spectrum Analyzer provides the results. The EMViewer software is used to control the Robotic Arm and the external Spectrum Analyser collects and analyses the results. Different types of Robotic Arms can be used, based on the desired size and resolution.
Range features
A high level overview of what this range offers
Capability
- Spectral scan, spatial scan, peak-hold, continuous scanning, spectral and spatial comparison, scripting, limit lines and report generation.
Supported spectrum analysers
- Keysight N90xx, N99xx, E4440A and many more
Supported operating systems
- Windows 10®
Supported overlays:
- Picture in JPEG format
- Standard Gerber© RS274x format and HPGL format CAD files
Downloads
for EMProbe
| Specifications | |
|---|---|
Max Frequency coverage: | 18GHz with the supplied Y.I.C. NF Probes |
Spatial resolution: | High Resolution: 7.5mm to 0.2mm |
The frequency accuracy of peaks: | Peak marking accuracy of the spectrum analyzer |
Probe to probe uniformity: | Dependent on the selected probe |
Maximum radiated power load: | Dependent on Spectrum Analyzer and the probe performance |
Operating temperature: | From 15⁰C- 40⁰C (continuous spectral and spatial scans at 50MHz) |
Weight: | 3.40Kg (Excluding cables and the adaptor) |
