GNSS Front End Modules and Notch Filters
- Technology
- RF Filters
- Partner
- Tai-Saw Technology
Front End Modules provide an LNA with one or two SAW filters (pre and post filters) in one miniature package. They are used between the antenna and the signal input of GNSS engines (ICs) to improve reception performance.
Notch filters are used to block GPS signal from other sub-systems (e. g. telephone line).
Tai-Saw is a leading provider of surface acoustic wave (SAW) devices and quartz timing, globally with multiple facilities. Their products are used in applications across industrial, telecoms, consumer and for automotive grade solutions.
Range features
A high level overview of what this range offers
- GPS, GLONASS, GALILEO, BEIDOU
- L1, L2, L5
- 50 Ohm I/O Impedance
- Packages 1.5 x 1.1 and 2.5 x 2.5 mm
- Automotive AEC-Q200 upon request
Downloads
for GNSS Front End Modules and Notch Filters
What’s in this range?
All the variants in the range and a comparison of what they offer
| Model | Center frequency | Bandwidth | Package | Note |
|---|---|---|---|---|
TN0081A | 1588.655 MHz | 34.47 MHz | 2.5 x 2.5 mm | GPS/GLONASS FEM AEC-Q100 |
TN0081B | 1582.47 MHz | 46.84 MHz | 2.5 x 2.5 mm | GPS/GLONASS/BEIDOU FEM AEC-Q100 |
TN0089A | 1582.47 MHz | 46.84 MHz | 1.5 x 1.1 mm | GPS/GLONASS/BEIDOU FEM AEC-Q100 |
TN0126A | 1176.45 MHz | 24 MHz | 1.5 x 1.1 mm | GPS L5 FEM |
TN0125A | 1227.6 MHz | 22 MHz | 1.5 x 1.1 mm | GPS L2 FEM |
TE0123A | 1575.42 MHz | 2 MHz | 5.0 x 5.0 mm | GPS Notch |
TE-125A | 1582.47 MHz | 48 MHz | 3.0 x 3.0 mm | GPS/GLONASS/BEIDOU Notch |
