Acal BFi kOr: Fe-amorphe Magnetkerne
- Technologie
- Amorphe Kerne
- Partner
- Acal BFi kOr
kOr 156 – Produkte werden aus einem amorphen Bandmaterial auf Eisenbasis hergestellt, das als zeitgemäßer Ersatz für Elektroblech entwickelt wurde. Geringe Verluste im Vergleich zu Blechkernen machen die Komponenten sowohl bei den Anschaffungs- als auch bei den Betriebskosten für Niederfrequenzanwendungen und sogar für Mittelfrequenzanwendungen mit geringer Welligkeit (ripple) hocheffizient. Wir bieten Standard-Schnittbandkerne und eine große Auswahl an kundenspezifischen Formen und Ausführungen an.

Eigenschaften
- Low losses compared with silicon steel
- High BS (1,56 T) – good linearity and frequency characteristics
- Effective permeability (hence: AL) and DC-tolerance adjustable with gaps
- Multi-cuts possible
- Applicable ideally for transformers up to about 5kHz
- Standard size cut cores match perfectly to standard bobbins
- Size and shape adjustable to space limitations
- Custom sizes possible according to ribbon dimensions
Verfügbare Modellvariationen
Alle verfügbaren Varianten und ein Vergleich ihrer Spezifikationen
Parameter | Symbol | Unit | Value | |
---|---|---|---|---|
Initial permeability | μi | – | 3000 – 15 000, 1500 – 5000 | In protection case 25°C, Impregnated 25°C |
Saturation flux density | Bsat | mT | 1560, 1470 | H > 3000 mA/cm 25°C, H > 3000 mA/cm 100°C |
Curie temperature | Tc | °C | 400 | – |
Resistance | – | μΩm | 1,3 | – |
Density | d | g/ cm3 | 7,18 | – |
Saturation magnetostriction | λS | ppm | 27 | – |
Chemical composition | at% | ~Fe80Si7B13 | – | |
Tape thickness | d | µm | 25 | – |
Tape width | b | mm | 5-130 | – |
Filling factor (stacking factor) | FF | % | >85, >80 | b ≤ 25mm, b ≤ 25mm |