United Kingdom
PowerQor® PCB DC-DC Converters
Supplier: SynQor®
Technology type: PCB DC/DC Power Supplies
Single and dual output converters are composed of next-generation, board-mountable, isolated, fixed switching frequency DC-DC converters that use synchronous rectification to achieve extremely high power conversion efficiency.
The power dissipated by the PowerQor® converter is so low that a heatsink is not required, which saves cost, weight, height, and application effort. All of the power and control components are mounted to the multi-layer PCB substrate, with 24V and 48V input, single and dual output isolated.
Range features
A high level overview of what this range offers
- Ultra-high efficiency up to 97%
- Wide input voltage ranges
- Withstand up to 100V, 100ms input voltage transient (PQ60, PQ40 models only)
- Fixed frequency switching, low output noise
- No minimum load requirement
- Full feature optional on some models
- Input under-voltage lockout (UVLO)
- Output current limit (OCP) and short circuit protection
- Output over-voltage protection (OVP)
- Thermal shutdown (OTP)
- Back-drive protection (starts into pre-biased load)
- ON/OFF control referenced to input side (fully isolated for full bricks)
- Remote sense
- Output voltage trim (industry std. trim equations)
- Digital Output Current Sharing (Hz only)
What's in this range?
All the variants in the range and a comparison of what they offer
|
Package size |
1.8 VOUT |
3.3 VOUT |
5 VOUT |
12 VOUT |
15 VOUT |
28 VOUT |
50 VOUT |
|---|---|---|---|---|---|---|---|
|
Quarter-brick |
25A/ 45W |
25A/ 83W 25A/ 83W compact |
40A/ 200W 20A/ 100W |
25A/ 300W 8.33A/ 100W |
20A/ 300W 6.67A/ 100W |
10.7A/ 300W |
6A/ 300W |
Enquire
Submit your enquiry directly to one of our Technical Sales Specialists.
Alternatively call our Sales Team.
Mandatory fields*
The ability of our engineers to continually deliver leading edge custom power supply solutions to you is propelled by the Power Supply Technology Centre.
Every device needs power but with a huge variety of features and specifications available it can be difficult to determine the right product for you. With this service, the possibilities are endless.
Whether you’re looking to modify or configure a standard product, integrate it into a custom design, or design and modify a rack, chassis or PCB - we can support with the design, manufacturing, testing and integration of your tailored solution.
Call an expert today
Associated technologies
Magnetics
Photonics
Imaging
