United Kingdom
cPCI I/O products
Supplier: ADLINK
Technology type: cPCI
Adlink offer chassis, RTM and I/O cards to allow rapid deployment of system level solutions. These platforms compliment their range of SBC’s available in both 3U and 6U form factors. Both Adlink and Acal can offer customisation and integration of complete system level solutions. We can provide custom certificated platforms (both rail and military) on request.
Range features
A high level overview of what this range offers
- 6U and 3U Chassis options
- Fan and fanless platforms available
- Extreme rugged versions
- cPCI-Serial range
- Ideal for rail, military and industrial applications
- cPCI PSU’s available
- cPCI Switch Comprehensive range of RTM’s
- Comprehensive range of RTM’s
- EN50155 Rail certified solutions
- Wide offering of peripherals
What's in this range?
All the variants in the range and a comparison of what they offer
|
Model |
Description |
PSU |
Key features |
Form factor |
|---|---|---|---|---|
|
cPCIS-3048 |
3U CompactPCI Enclosure with 6-slot Backplane and Redundant Power Modules |
Dual Redundant |
|
19” 4U rackmount enclosure |
|
cPCIS-ET1100 series |
3U Enclosure with 32-bit Backplane and Wide Temperature Range CompactPCI® Redundant Power Supply |
Wide Temp Dual Redundant |
|
19” 3U rackmount enclosure |
|
cPCIS-6418U |
4U 8-slot CompactPCI® System with Redundant Power Supplies |
Dual Redundant |
|
19” 4U high rackmount enclosure |
|
cPCI-6235R |
2U Rackmount Chassis with Dual AC-Input Mini Redundant Power Supplies |
Dual Redundant |
|
19” 2U high Rackmount enclosure |
|
Model |
Description |
Wide temp |
Key features |
Form factor |
|---|---|---|---|---|
|
cPCI-3W10 |
3U CompactPCI Mini PCI, Mini PCIe Carrier Board |
N/A |
Supports 32bit, 33/66MHz CompactPCI® bus One SIM card socket One Mini PCI and one Mini PCIe socket PICMG® 2.0 R3.0 compliant |
3U |
|
cPCI-3E10/3E12 |
3U CompactPCI® 2/4-Port Gigabit Ethernet Card |
N/A |
PICMG® 2.0 R3.0 compliant Supports 32bit/33MHz, 66bit/64MHz CompactPCI® bus 3U 4HP form factor, 100mmx160mm (LxW) Two or four RJ-45 10/100/1000BASE-T ports on front panel Intel® 82574L Gigabit Ethernet controllers |
3U |
|
cPCI-A3X10 |
3U CompactPCI Serial XMC Module Carrier |
Yes |
3U 4HP CPCI-S.0 peripheral One XMC slot Operating temperature: -40°C to 85°C with qualified components |
3U |
|
cPCI-A3H10 |
3U CompactPCI Serial 2.5" SATA Storage Carrier |
Yes
|
3U 4HP CPCI-S.0 peripheral One 2.5" SATA 6Gb/s drive slot Status LEDs on faceplate: drive activity, hot-swap status, user-configurable Hot swap support Operating temperature: -40°C to 85°C with qualified components |
3U |
|
cPCI-3544/3548 |
4/8-Port RS-422/485 Isolated Serial Communications Card |
N/A |
32-bit CompactPCI®, PICMG® 2.0 Rev 2.1 Plug-and-play, IRQ & I/O address automatically assigned by PCI BIOS Four asynchronous communications ports with intelligent buffer Four RS-422/485 ports 2500 VRMS isolation voltage |
3U |
|
Model |
Description |
Wide temp |
Key features |
Form factor |
|---|---|---|---|---|
|
cPCI-9116 |
64-CH 16-Bit 250kS/s Multi-Function DAQ Card |
N/A |
PICMG 2.0 Rev 2.1 16-bit A/D and sampling rate up to 250kS/s 64-CH single-ended or 32-CH differential input On-board 1k-sample A/D FIFO Programmable gains of x1, x2, x4, x8 |
3U |
|
cPCI-6208/6216 Series |
8/16-CH 16-Bit Analog Output Modules |
N/A |
PICMG 2.0 Rev 2.1 16-bit D/A resolution 16-CH voltage on 6216V 8-CH voltage outputs on 6208A and 6208V 8-CH current outputs on 6208A |
3U |
|
cPCI-6S10 |
6U CompactPCI 10 Gigabit Ethernet Switch Blade |
N/A |
ARM Cortex-A9 processor integrated in Broadcom BCM56150 switch 24-port fully managed gigabit ethernet switch Pre-installed ADLINK PacketManager accelerates packet processing Layer 2/3 switching with advanced support for VLANs, QoS and IPv6 Two 10 Gigabit Ethernet SFP+ uplink ports Supports IPMI based on PICMG 2.9 (System Management Specification)
|
6U |
|
Model |
Description |
Wide Temp |
Key Features |
Form factor |
|---|---|---|---|---|
|
PCI-7841/cPCI-7841 |
Dual-port Isolated CAN Interface Cards |
N/A |
PICMG® 2.0 Rev 2.1 Dual-independent CAN network operation Up to 1 Mbps programmable transfer rate 16 MHz CAN controller frequency 2500 VRMS optical isolation |
3U |
|
XMC-E540 |
Dual-port 10GBASE-T Ethernet XMC Module |
N/A |
Intel® 10Gigabit Ethernet Controller X540 Dual-port RJ-45 copper interface at 10G/1G/100Mbps IEEE 802.3an 10GBASE-T, IEEE 802.3 100/1000BASE-T compliant PCI Express v2.1 x1/x2/x4/x8 VMDq1, VMDq and PCI-SIG SR-IOV virtualization |
XMC |
|
cPCI-7432/7433/7434 |
64-CH Isolated Digital I/O Modules |
N/A |
Two external interrupt sources for cPCI-7432/7432RP/7433 3U Eurocard form factor, CompactPCI compliant (PICMG 2.0 R2.1) 32-CH isolated digital inputs & 32-CH isolated digital outputs for cPCI-7432 64-CH isolated digital inputs for cPCI-7433 64-CH isolated digital outputs for cPCI-7434/7434P |
3U |
|
cPCI-7252 |
8-CH Relay Outputs & 16-CH Isolated DI Module |
N/A
|
Two external interrupt sources relay output status read back 16-CH isolated DI On-board low-pass filtering for DI Nonlatching relays
|
3U |
Downloads
Enquire
Submit your enquiry directly to one of our Technical Sales Specialists.
Alternatively call our Sales Team.
Mandatory fields*
The Embedded Computing Technology Centre drives advanced solutions, so you can deliver the technologies of tomorrow - today.
Design customer driven systems, build prototypes and manufacture products to meet your distinct needs. Many of the platform-based technologies that we offer were designed with customisation in mind.
Our capabilities help us to offer solutions across all stages of your project. Whether your requirements are standard, modified or highly customised, our experts support and identify your aims and work to ensure that we provide a solution that fits.
Call an expert today
Associated technologies
Power supplies
Communications
Sensors
