Italy
Sub 1GHz ISM Series
Supplier: Amiccom
Technology type: ISM
AMICCOM offers a huge variety of devices for Sub 1GHz wireless applications. Besides the bare radio ICs, usually interfaced by SPI from a customer’s MCU of choice, some of them are available with an attached application MCU, as so-called SoC (System on Chip), as well.
The portfolio ranges from low data rate, narrowband devices to chipsets for transmission speeds up to 2 Mbps. The high TX output power (up to +20dBm) and good sensitivity eliminates the need for additional external hardware (like amplifiers or FEMs) in most use cases.
Very low power consumption, especially in continuous RX mode, is a key feature of many parts. The so-called “Wake-On-Radio” (WOR) feature and integrated packet handling features reduce the workload for the application MCU, which further helps to save power and extend battery run-times.
Range features
A high level overview of what this range offers
- TX, RX, TRX devices for frequency range [169 … 915] MHz available
- Supported modulation types: ASK/OOK (dedicated devices); (G)FSK)
- Over-the-air data rate: up to 2Mbps
- TX output power: up to +20dBm (100mW)
- RX sensitivity: e.g. down to -117dBm @ 868MHz; data rate 2kbps; IF BW = 50kHz (for illustration purposes only, as this parameter is highly modulation/receiver setup dependent)
- Current consumption in continuous RX active mode: down to ~5mA
- TX/RX payload data FIFO
- Integrated packet handler with CRC, FEC and data whitening options
- “Wake on Radio” (WOR): the radio can listen for incoming packets or transmit predefined payloads autonomously, without steady interaction from the MCU, at given, user-defined intervals
- Commonly used QFN type packages
What's in this range?
All the variants in the range and a comparison of what they offer
|
Radio ICs (selection) |
||||
|---|---|---|---|---|
|
Part Number |
Frequency [MHz] |
Data Rate [kbps] |
Max. TX power [dBm] |
Additional features summary |
|
A7128 |
433 … 915 |
… 2000 |
+10 |
(G)FSK; QFN20 4x4 package |
|
A7129 |
315 … 915 |
… 250 |
+13 |
(G)FSK; ultra-low RX current; QFN24 4x4 package |
|
A7136 |
169 … 915 |
… 500 |
+20 |
(4)(G)FSK; high performance, narrow-band; integrated DC/DC buck converter; QFN24 4x4 package |
|
A7169 |
315 … 915 |
… 500 |
+20 |
(G)FSK; ultra-low RX current; small size QFN16 3x3 package |
|
A7328 |
433 … 915 |
… 2000 |
+10 |
(G)FSK; QFN16 4x4 package; TX only complement to A7128 TRX and others |
|
Radio SoCs (selection) |
||||
|
Part Number |
CPU type |
RAM [kB] |
Code memory [Flash; kB] |
Additional features summary |
|
A9129 |
8051 |
4 |
16 |
I2C, SPI, UART, PWM x2, ADC; based on A7129 radio; QFN48 6x6 package |
|
A9129M0 |
ARM Cortex-M0 |
16 |
128 |
I2C, SPI, UART, PWM x2, ADC; based on A7129 radio; QFN40 5x5 package |
Downloads
Enquire
Submit your enquiry directly to one of our Technical Sales Specialists.
Alternatively call our Sales Team.
Mandatory fields*
Our IoT and Wireless Technology Centre will advance your ability to deliver innovative technology solutions for complex applications – from sensors to the cloud.
Creating custom solutions and navigating adding challenging connectivity to an application requires specialist expertise and capabilities. Our team of hardware design and software application engineers have extensive experience, ensuring we can bring your concept to life.
Covering proof of concept and feasibility studies for development, through to working prototype realisation and initial production management, our team delivers you complete project support.
Call an expert today
Associated technologies
Sensors
Interconnect
Imaging
