ENA Vector Network Analysers
- Technology
- Network Analysers
- Partner
- Keysight
When you need to measure S-parameters, the right mix of speed and performance gives you an edge. Keysight ENA vector network analysers provide affordable measurement integrity to help you transform a deeper understanding into a better design.
Drive down the cost of test
Increasing product complexity, tightly integrated designs, and the demand for higher manufacturing yields are some of the challenges you face in production test. In a perfect world, you will meet your product quality goals while reducing the cost of test. The ENA vector network analyser reduces the cost of ownership and the cost of test with its flexibility, reliability, and upgradability
Simplify mixer characterization
It is difficult to characterize nonlinear devices such as mixers due to complex measurement setups and unwanted errors. Simplify your mixer characterization to increase your throughput with scalar mixer calibration (SMC) and vector-mixer calibration (VMC) on your ENA RF network analyser. These calibration techniques allow you to easily evaluate mixer parameters such as conversion loss, group delay, intermodulation distortion, and more.
Range features
A high level overview of what this range offers
E5063A
- Drive Down the Cost of Test for Passive RF Components
- For testing passive components such as antennas, filters, cables, or connectors up to 18GHz
- Measure a wide range of components with a versatile 2-port, 50-ohm S-parameter test set
- Enhance your measurements with Option 010 for time domain analysis capability
- Simplify PCB design and test with a dedicated graphical user interface with Option 011
- Boost efficiency and productivity with a consistent measurement framework
- Upgrade options at any time
E5061B
- Solid performance in an enhanced platform
- Select the best configuration for your test needs from a wide variety of test set options: 100 kHz to 1.5 GHz/ 3 GHz, 2-port, 50 or 75-ohm, transmission/reflection or S-parameter test set
- Measure from 5 Hz to 500 MHz/1.5 GHz/3 GHz with option LF-RF NA
- Combine network analysis and impedance analysis to customize your application in a single instrument (Option 3L5/3L4/3L3 plus 005)
Downloads
for ENA Vector Network Analysers
What’s in this range?
All the variants in the range and a comparison of what they offer
| Model | Built-in ports | Dynamic range | Max.frequency | Ouptut power | Best speed @201point, 1 sweep | Applications |
|---|---|---|---|---|---|---|
E5063A | 2 | 117dB | 18GHz | 0 dBm | 9 ms | S-parameters Return loss Time domain Insertion loss/gain |
E5061B | 2 | 120dB | 3GHz | 10 dBm | 9 ms | S-Parameters Distance-To-Fault Return Loss Insertion Loss/Gain LF Circuits (5 Hz) |
