Series 946 industrial control

Manufacturer's part number :


Manufacturer Honeywell

Honeywell - Sensors

Description :

The 946 series are industrial controls performing distance measurement by using an ultrasonic beam. They provide the best compromise between easy usage and advanced features. The 946 feature two switching outputs (Open collector PNP). Their adjustment is very easily done by the mean of AUTO-TUNING. By inserting a plug with four positions, one can program the sensor in a mater of seconds; the parameters are stored in a non-volatile memory (EPROM.)

View our wide range of Position products

View our portfolio of Sensors

See all products from our supplier Honeywell - Sensors

  • Quote and availability


    Scan ranges from 0.5 m to 6.0 m [1.64 ft to 19.68 ft]
  • Auto-tuning by four positions plug
  • Analogue Slope selection
  • Stainless steel M30 housing, IP65
  • Analogue outputs (4 mA to 20 mA and 0 Vdc to 10 Vdc)
  • Temperature compensation
  • M12 four-pin connector
  • Connector Cable 2.0 m [6.56 ft] included
Features Similar products
Range 200 to 4000 mm  

  similar products found

Search similar products
Output Type Analogue 0 to 10 Vdc, 4 to 20 mA  
Supply Voltage Range (V) 10 to 30 DC  
Housing Style M30 metal  
Termination Type Connector  
Beam Angle ± 5 °  
Response Time < 145 ms  
Repeatability <0.1%  
Supply Voltage (V) 10 to 30 DC  
Integrated Temperature Compensation Yes  
Operating Temperature Range (°C) -25 to 70  
Current Consumption (mA) 60 maximum  
IP Rating IP65