1.5A Single Flash LED Driver IC

Manufacturer's part number :


NATO number :


Manufacturer Skyworks


Description :

The AAT1274 is a high-efficiency, 1.5A high-current boost converter for LED photo flash applications. It maintains output current regulation by switching the internal high-side and low-side switch transistors, pulse width modulated at a fixed frequency of 2MHz. The high switching frequency allows the use of a small external inductor and output capacitor, making the AAT1274 ideally suited in all single cell, Li-ion-powered applications. Skyworks' proprietary AS2Cwire™ (Advanced Simple Serial Control™) serial digital interface is used to enable, disable, configure, and program the operation of the AAT1274. Using the AS2Cwire interface, the movie-mode current level for each LED, and the flash-to-movie-mode current ratio can be programmed to one of 16 levels. The AAT1274 includes a separate Flash Enable input to initiate the flash operation and a Flash Inhibit pin which reduces the flash current to movie-mode levels during high battery demand. The maximum flash and movie-mode current is set by one external resistor where the ratio of flash to movie mode current is set at approximately 7.3:1. The AAT1274 can drive one high current LED. The AAT1274 contains a thermal management system to protect the device in the event of an output short-circuit condition. Built-in circuitry prevents excessive inrush current during start-up. The shutdown feature reduces quiescent current to less than 1.0μA. The AAT1274 is available in a Pb-free, thermally-enhanced TDFN33-14 package and operates over the -40°C to 85°C temperature range.

View our wide range of Analogue / Mixed signal products

View our portfolio of Semiconductors

See all products from our supplier Skyworks



  • Quote and availability


    • Input Voltage Range: 2.7V to 5.5V
    • Single Channel Flash Output
    • Up to 1.5A Regulated Output Current
    • Up to 88% Efficiency
    • 2 MHz Switching Frequency
    • Separate Flash Enable
    • Single Resistor Sets Flash and Movie Mode Current
    • AS2Cwire Single Wire Programming:
    • Movie Mode Current
    • Flash/Movie Mode Current Ratio
    • True Load Disconnect
    • Soft-Start and Input Current Limit
    • Over-Voltage (Open LED, Open Circuit), Short Circuit, and Over-Temperature Protection
    • -40°C to +85°C Temperature Range
    • TDFN33-14 Package

    How wireless works

Features Similar products
Control scheme Advanced Simple Serial Control  

  similar products found

Search similar products
Switching frequency (kHz) 2000  
Max Input Voltage (V) 2.7 to 5.5  
Output Voltage (V) 5.5  
Typ. Active Current (µA) 670  
Output Capacitor Type 2.2 μF, Ceramic Capacitor  
Output Current (mA) 206  
Operating Temperature (°C) -40 to +85  
Package TDFN33-14