1.6A Dynamic Battery Charger and Power Management IC

Manufacturer's part number :


Manufacturer Skyworks


Description :

The AAT3672 BatteryManager is a highly integrated single-cell (4.2V) lithium-ion/polymer battery charger and system power management IC that enables simultaneous battery charging and system load management. The AAT3672 provides charging current and system power management from a single input that may be supplied by an AC adapter or USB port power source. This device allows the user to program the battery charge current up to 1.6A depending on the current shared with the system output. A battery charge timeout timer is provided for charging safety and the charge termination current is also user-programmable. The AAT3672 employs a battery charge current reduction function that enables continued system operation in the event the input source can not supply the required load current. When operated under excessive thermal conditions, the AAT3672 has a digitally controlled thermal loop which allows the maximum possible charging current for any given ambient temperature condition. Battery temperature, voltage and charge state are monitored for fault conditions. The AAT3672-1/-2 has two status monitor output pins (STAT1 and STAT2) , and the AAT3672-3 has only one status monitor output (STAT1) provided to indicate battery charge status by directly driving external LEDs. The AAT3672 is available in a Pb-free, thermally enhanced, space-saving 14-pin 3x3mm TDFN package.

View our wide range of Analogue / Mixed signal products

View our portfolio of Semiconductors

See all products from our supplier Skyworks



  • Quote and availability


    • System Load Power Control from Either ADP or Battery
    • ADP Presence Automatically Routes Power from Source to Load and Charges Battery
    • Automatic Charge Reduction Loop to Minimize Charge Time
    • Digitally Controlled Thermal Protection
    • Battery Power Enable
    • Programmable Battery Charge Timer
    • Battery Cell Temperature Sensing
    • Charge Status Reporting (LEDs)
    • Automatic Recharge Sequencing
    • Battery Over-Voltage, Over-Current, and Over-Temperature Protection
    • System Load Current Limiting
    • 14-pin 3 × 3mm TDFN Package

    How wireless works

Features Similar products
Battery Technology Li-Ion, Li-Polymer  

  similar products found

Search similar products
Linear Mode Yes  
Number of Cells 1  
Int/Ext FET Int  
Vcc Range (V) 4 to 6.5  
Temperature Monitor Yes  
Charge Safety Timers Yes  
Max Thermal Regulation Yes  
Operating Temperature (°C) -25 to +85  
Package TDFN33-14  
Cell Voltage (V) 4.2  
Max. Charging Current (mA) 1600