X300 Wi-Fi Gateway

The Lantronix X300 is a compact (79 x 79 mm), industrial-grade IoT gateway ideal for mission-critical deployments. It combines LTE M or Cat-1 cellular, Wi-Fi, Bluetooth/BLE, Ethernet, and serial interfaces in one rugged device. Included are Percepxion™ cloud management, embedded SIM with data plans, and expert support through LEVEL Services.

Security is ensured with InfiniShield™, featuring a secure element, secure boot, and encrypted communications. Powered by the Linux-based ePACK software suite, it supports edge processing and application customisation. Optional BLE sensors enable monitoring of temperature, humidity, motion, and location.

X300 Wi-Fi Gateway

Range features

An overview of what’s in the range

  • Compact, industrial-grade design
  • Versatile interfaces (cellular, Wi-Fi, BLE, Ethernet, serial)
  • Advanced cybersecurity with InfiniShield™
  • Percepxion™ device management
  • Built-in connectivity services (SIM & data)
  • Expert support & limited lifetime warranty
  • Fast hardware replacement

Téléchargements

pour X300 Wi-Fi Gateway

pdf
X300 series compact cellular IoT gateway solution
Télécharger

What’s in this range?

All the variants in the range and a comparison of what they offer

CategorySpecification

Cellular

LTE Cat M1 – X303 with 2G fallback mode LTE Cat1 – X304 with 3G or 2G fallback mode options Wi-Fi & Bluetooth operation

Wi-Fi & Bluetooth operation

Wi-Fi 5 and Bluetooth/BLE 5.0; via one (X303) or two (X300, X304) RP-SMA antenna connector

Ethernet

One LAN port; 10/100BASE-T; via a RJ-45 header fitted with two LEDs

Serial communication

RS-232 6-signal (Rx, Tx, RTS, CTS, either DSR or DCD, DTR) implementation; via an RJ-45 header RS-485 half or full duplex, via RJ-45 header Switchable by software

SIM

Lantronix Connectivity Services embedded MFF SIM; auxiliary mini-SIM holder

Location services

Qualcomm® IZat™ gen. 8C gps One; via a dedicated SMA antenna connector (X304 only)

Temperature & humidity ranges

Operating: -30°C ~ +70°C; up to 95% RH Storage: -40°C ~ +85°C; up to 95% RH

Power

Input voltage: 9 ~ 30 V DC 3-pin Nano-Fit™ header Digital Input (Ignition): One (1) digital input, on the second pin of the 3-pin header Input: 0 ~ 2.5 V DC => ZERO; 3 ~ 50 V DC => ONE

Contactez-nous

Pour demander plus d’informations et vérifier la disponibilité, n’hésitez pas à nous contacter dès maintenant. Ou remplissez simplement notre formulaire de contact pour qu’un membre de notre équipe commerciale vous réponde.

Champ obligatoire

En envoyant ce formulaire de demande, vous confirmez que vous avez lu et que vous acceptez notre Politique de confidentialité .

There was an error while sending the form. Please try again.