Pilote de LED avec pompe de charge trois canaux

Numéro de référence fabricant :


Fabricant Skyworks


Description :

The AAT3193 is a charge-pump based, current-sink white LED driver capable of driving one to three LEDs up to 30mA, each. It automatically switches between 1x mode and 2x mode to maintain the highest efficiency and optimal LED current accuracy and matching. The AAT3193 charge pump's 1x mode (bypass mode) has very low resistance allowing LED current regulation to be maintained with input supply voltage approaching the LED forward voltage. The AAT3193 is available in a 2×2.2mm, 10-lead SC70JW-10 package.

View our wide range of Analogue / Mixed signal products

View our portfolio of Semiconductors

See all products from our supplier Skyworks



  • Prix et disponibilités

  • Posez une question à nos experts


    • Drives up to 3 LEDs at up to 30mA, each
    • Automatic Switching Between 1x and 2x Modes
    • 0.9MHz Switching Frequency
    • Linear LED Output Current Control
    • Single-wire, S2Cwire Interface
    • ON/OFF or PWM Interface
    • ±10% LED Output Current Accuracy
    • ±3% LED Output Current Matching
    • Low-Current Shutdown Mode
    • Built-in Thermal Protection
    • Automatic Soft-Start
    • Available in 2×2.2mm SC70JW-10 Package

    How wireless works

Caractéristiques Produits similaires
Courant Actif O/P Typ (µA) 100  

   produits similaires trouvés

Rechercher des produits similaires
Tension de Sortie (V) 4.7  
Courant au Repos Typ. (µA) < 1  
Gamme de Tension d'entrée (V) 2.7 to 5.5  
Type de Composant Inverting  
Température de Fonctionnement (°C) -40 to +85  
Boîtier SC70JW-10