Lepton 3, infrared thermal camera core module, 160 x 120 pixels
Artikelnummer des Herstellers:
500-0726-01
FLIR
Beschreibung:
The FLIR Lepton 3, FLIR’s highest resolution LWIR micro thermal camera solution, delivers full 160 x 120 thermal resolution, four times more than earlier Lepton versions. The revolutionary Lepton was the first complete longwave infrared thermal camera small enough to be used in smartphones and other mobile devices. The new, higher resolution Lepton 3 gives users better image detail in a powerful, compact, lightweight package for even greater utility in commercial applications as both a thermal camera and a detection sensor. Smaller than a dime and ten times less expensive than a traditional IR camera, the Lepton 3 brings high quality thermal vision everywhere.
Eigenschaften:
- Enhanced IR sensor – greater sensitivity than common thermopile arrays
- Micro thermal imager – uncooled thermal imaging for small electronics
- Ease of integration – simplifies development and manufacturing of thermal-enabled devices
- Safety and security – see people lurking around in the dark at your home or business
- Automotive – detect living beings in a car to prevent children or animals from being left in hot cars
- Micro and Nano UAV / UGV platforms – makes even smaller UAV/UAG platforms possible
- Home repair and energy efficiency – find hidden air leaks, missing insulation, and water damage
- Building automation and presence detection – use as a sensor to operate doors or activate HVAC systems automatically
Applications
Compact waterproof pan/tilt unit
Artikelnummer des Herstellers:
PTU-5
FLIR
Beschreibung:
With top and side payload mounting options, class leading speed and accuracy, easy integration, and MIL-spec durability to stand up to harsh environments, PTU-5 is the pan/tilt solution OEMs have been looking for.
Standing only six inches tall when fully integrated, the new FLIR PTU-5 can hold up to five pounds on its top bracket, packing incredible performance into a compact package. Even with its small size the PTU-5 is more accurate than many other – more expensive – systems thanks to the absolute encoders used on the drive axes.
Fully sealed and weather-proof rated to IP67, the PTU-5 can be used anywhere, even outdoors. By doing away with the separate controller box, and including a unique ability to home the axes without returning to zero, the PTU-5 is easy to set-up and has a fast start-up sequence.
Eigenschaften:
- Class-leading speed and accuracy
- Turn on and track moving targets in seconds
- Extra small, rugged, portable design
- Lightweight, MIL-spec system for harsh environments
- Easy integration
- Flexibility for a wide range of applications and sensors
Transceiver, 4 x 25.78 Gb/s 850 nm multi-mode microQSFP SR4
Artikelnummer des Herstellers:
LTU8531-BC+
Hisense Broadband
Beschreibung:
The LTU8531 is a microQSFP Optical transceiver for 4 x 25Gb/s optical links. It is compliant with the microQSFP MSA, IEEE P802.3bm 100GBASE-SR4 specifications. It operates at 25.78Gb/s up to 100m over OM4 Multi-mode fibre.
Eigenschaften:
- 4 independent parallel optical channels
- Each channel data rate up to 25.78Gb/s with integrated CDR
- Hot pluggable
- Up to 100m link on OM4 Multi-mode fibre
- 850nm VCSEL/PD array technology
- CML compatible electrical I/O
- microQSFP MSA compliance
- Optical connectivity via industry standard MPO/MTP terminated fibre ribbon
- Monitors for TX power, VCSEL bias, received power, module temperature and module supply
- Case operating temperature: commercial: 0 to 70°C
- RoHS II compliance
Video processor, small, low-power, single-channel, on-board
Artikelnummer des Herstellers:
SLA-1500-OEM
SightLine
Beschreibung:
Designed to add advanced capabilities to camera systems, the 1500-OEM processor is a very small, low-power, single-channel on-board video processing solution which adds value to a wide range of applications. It is 1.04 x 1.48 inches (26.5 x 37.7 mm) and weighs 0.27 ounces (7.6 grams).
The board processes and streams HD video outputs to 720p/30. It operates on video right at the source, which is key for low latency performance and the best video quality.
Camera interfaces supported
- • Analog (NTSC or PAL) – two inputs
- • Sony HD EO Block FCB-EH6xxx
- • Sony HD EO Block FCB-EV7500
- • Hitachi HD EO Block DI-SC120R
- • FLIR Tau LWIR – direct board to camera connection
- • FLIR Quark LWIR – adaptor uAB board / FFC ribbon and then small adaptor board at camera
- • DRS Tamarisk LWIR – adaptor uAB board / FFC ribbon and then small adaptor board at camera
- • HDMI
- • Camera link
The supported Video Processing Library provides a suite of video functions that are key in a wide variety of ISR applications. Configured as either an SLA for gimbal control or SLE versions, the 1500-OEM provides a tailorable, powerful solution.
Eigenschaften:
- Full set of video processing functions – see SightLine's Video Processing Library – including electronic stabilisation, scene and object tracking, MTD, video enhancement, recording, and encoding
- Multiple video Inputs, single channel processing
- Video inputs: HD, SD, analog, digital
- Video outputs: SD encoded and analog
- Tracker telemetry output to Gimbal system controller
- Onboard video and snapshot recording to MicroSD
- RS-232 or Ethernet command and control
Video processor, multi-channel, high definition (HD)
Artikelnummer des Herstellers:
SLA-3000-OEM
SightLine
Beschreibung:
The SLA-3000-OEM is a multi-channel high definition (HD) advanced video-processing solution for the next generation of surveillance gimbals and camera systems. It includes two video channels and is capable of providing a full suite of processing functions and provide full frame rate HD H.264 streaming with KLV data to 1080p/30. It is 3.47 x 1.97 x 0.2 inches (88 x 50 x 6.25 mm) and weighs 1.4 ounces (39 grams).
Camera interfaces supported
These supported interfaces provide two input channels
- • Sony HD EO block FCB-EH6xxx
- • Sony HD EO block FCB-EV7500
- • Hitachi HD EO block DI-SC120R
- • HDMI (in development)
- • Analog (NTSC or PAL) two inputs per channel
- • FLIR Quark LWIR – adaptor uAB board / FFC ribbon and then small adaptor board at camera
- • DRS Tamarisk LWIR – adaptor uAB board / FFC ribbon and then small adaptor board at camera
Eigenschaften:
- Will support full set of video processing functions – see SightLine's Video Processing Software Library – including electronic stabilisation, scene and object tracking, MTD, video enhancement, recording, and encoding
- Encoded HD video output (to 1080p/30)
- HD video output via 10/100 Ethernet
- Elementary video (H.264) and metadata (KLV) encoding with MPEG2-TS (transport stream)
- Two digital inputs up to 1080p resolution
- Adaptor boards provide input configuration flexibility
- One digital output (Ethernet)
- RS-232 or Ethernet command and control
- Software upgrade to full SLA-3000 capabilities
Thermally conductive paste
Artikelnummer des Herstellers:
TCTP-3,5
MTC
Beschreibung:
Main criteria for choosing thermally conductive paste are the thermal properties as well as the processing capacities.
Thermal conductive paste builts a thin binding film for very good thermal conductivity through the low thermal resistance.
Due to low viscosity of the material it can be applied by silk screening or masking technology.
View our wide range of Paste products
View our portfolio of Thermal Products
See all products from our supplier MTC
Eigenschaften:
- Thermal conductivity: 3.5 W/m*K
- Suitable for auto-dispensing and screen printing applications
- Easy to apply
- Never dries out
- Halogen-free
Thermally conductive adhesive tapes
Artikelnummer des Herstellers:
TCAT-1,0S60
MTC
Beschreibung:
Thermally conductive adhesive tapes are used for bonding heatsinks and other cooling devices with the warm component. The adhesive tapes can be supplied as double sided adhesive film and are filled with metallic particles. Thermally conductive adhesive tapes eliminate the need for external clamps and curing.
View our wide range of Gap Filler
View our portfolio of Thermal Products
See all products from our supplier MTC
Eigenschaften:
- Thermal conductivity: 1.0 W/m*K
- Available in 400x300 mm standard sheet size, other dimensions and die-cut parts on request
- Available in thicknesses from 0.3 to 2.0 mm
- Double-sided, pressure sensitive adhesive
- Thermal conductivity in combination with electrical isolation
- High temperature stability
Spektralphotometer für diffuse Reflexionsmessungen, VIS-NIR 360nm-2500nm
Artikelnummer des Herstellers:
ARCspectro VIS-NIR DR
ARCoptix
Beschreibung:
Das ARCspectro VIS-NIR Spektrophotometer besteht aus einer Kombination eines Gitterspektrometers, für den sichtbaren Spektralbereich (360nm bis 950nm), mit einem FTIR-Spektrometer für den Bereich von 900nm bis 2500 nm. Beide Spektrometer sind mit einer 5 cm Ulbrichtkugel verbunden.
Die ARCspectro VIS-NIR ermöglicht es Ihnen, die Reflektivität von Materialien und Lacken über den gesamten solaren Spektralbereich von 360-2500 zu vermessen, mit nur einem Messgerät. Dies ist speziell von Interesse im Bereich der Malerei und für die Bau- oder Solarenergie –Industrie, da hiermit bestimmt werden kann wieviel Licht absorbiert und reflektiert wird. Speziell der NIR-Bereich ist hier interessant, da weiße Farben z.B. gut im sichtbaren Bereich reflektieren, sich aber im NIR Bereich (der ca. die Hälft des Sonnenlichtes darstellt) stark unterscheiden können.
Betrachten Sie unsere große Auswahl an FTIR-Spektrometer
Betrachten Sie unser Portfolio von Photonik
Betrachten Sie alle Produkte unseres Lieferanten Arcoptix
Eigenschaften:
- Large spectral range: 360nm-2500nm
- Optical resolution: 5 nm
- Fast (5 seconds measurement) and easy to use (no user parameters)
- Accurate measurement: integrating sphere with 10mm-diameter measurement port
- Automatic calculation of the Total Solar Reflectance value
- Illumination source: Halogen, 5W
Breitband Lichtquelle für VIS-NIR, 400nm-4µm, MIR 1-25µm
Artikelnummer des Herstellers:
ARCLight
ARCoptix
Beschreibung:
Die Arcoptix ArcLight NIR und IR sind vielseitig einsetzbare Lampen optimiert für den VIS-NIR Bereich (400 nm - 4000 nm) oder den IR Bereich (1-25µm). Die Lampen verfügen über eine stabilisierte Stromversorgung, einen variablen mechanischen Abschwächer. Außerdem enthalten Sie einem entfernbaren Faserkoppler ermöglichen Damit dem Betrieb im Freistrahl sowie Faser gekoppelt.
Betrachten Sie unsere große Auswahl an FTIR-Spektrometer
Betrachten Sie unser Portfolio von Photonik
Betrachten Sie alle Produkte unseres LieferantenArcoptix
Eigenschaften:
- VIS-NIR und IR Versionen verfügbar (0.4-4µm oder 1-25µm)
- Beinhaltet manuellen Abschwächer
- High Power VIS-NIR Version verfügbar
- Freistrahl und SMA Eingang vorhanden
- Geeignet für Reflexions-, Transmissions- oder Absorptionsmessungen
Ulbrichtkugel mit integrierter Halogen Lichtquelle
Artikelnummer des Herstellers:
ARCSphere-50-Hal
ARCoptix
Beschreibung:
Die ArcSphere-50-Hal ist ein Ulbrichtkugel mit Faseranschluß für ein Spektrometer zur Messung diffuser Reflexion.
Die ArcSphere-50 besitzt eine Integrierte Halogen-Lichtquelle die deutlich mehr Licht ausstrahlt als eine Relexionssonde und damit auch Messungen von Proben von nur sehr geringer Reflektivität ermöglicht.
Der 10mm Eingangsport wird geschützt von einem Saphirfenster, dass es erlaubt auch kleinste Proben wie z.B. Pulver direkt zu vermessen.
Betrachten Sie unsere große Auswahl an FTIR-Spektrometer
Betrachten Sie unser Portfolio von Photonik
Betrachten Sie alle Produkte unseres LieferantenArcoptix
Eigenschaften:
- Ulbrichtkugeldurchmesser: 50mm
- Spektraler Bereich: 360-2500nm
- Faseranschluss: SMA 905
- Lichtquelle: Halogen 5W
- Farbtemberatur: 2700 K
Adapter for FC connector
Artikelnummer des Herstellers:
23300155
FOSS Group
Beschreibung:
The 23300155 is a Fibre optic adapter for FC connector.
View our wide range of Fibre optic adapters
View our portfolio of Fibre optic components
See all products from our supplier FOSS Group
DIN Wall Box, up to 24 adapters, for Multimode fibres, SC-LC or ST connectors
Artikelnummer des Herstellers:
FPD76 DIN Wall Box MM series
FOSS Group
Beschreibung:
The FPD76 is a DIN Wall Box for multimode fiber providing up to 24 adapters with SC, LC or ST connectors. The wall box can be supplied ready fitted with fiber pigtails or with pre-terminated cables type AXAI, QXXI or Micro Cable. Accessories such as wall mount and cover are available.
View our wide range of Wall Box and Enclosures
View our portfolio of Fibre optic components
See all products from our supplier FOSS Group
1U Patch panel FP60 PRO with holes for 24x ST, SC or LC adapters
Artikelnummer des Herstellers:
FP6011x
FOSS Group
Beschreibung:
The FP6011x is a 1U Patch panel FP60 PRO with holes for 24x ST, SC or LC adapters. Available in white and black. Accessories such as cable tray, splice holder are available.
View our wide range of Patch Panels
View our portfolio of Fibre optic components
See all products from our supplier FOSS Group
532 / 1064 nm Sub-ns MOPA DPSS Laser, bis 60 W, ab 500 ps, 50 - 200 kHz
Artikelnummer des Herstellers:
Vento Series
Bright Solutions
Beschreibung:
VENTO vereint Sub-ns Pulse und hohe mittlere Leistungen in einem äußerst kompaktem Design: Auf der Grundfläche eines DIN A4 Blattes erzeugt VENTO dank des integrierten Verstärkers (MOPA) eine mittlere Leistung von bis zu 60 W (1064 nm) bzw. 25 W (532 nm) bei Repetitionsraten bis 200 kHz und Pulslängen bis 500 ps. Die Pulsenergie erreicht bis zu 750 µJ, die Pulsspitzenleistung bis zu 1 MW. Damit ist VENTO die ideale Laserquelle für schnelle Mikrobearbeitung von anspruchsvollen Materialien wie Glas und Keramiken, aber auch LIDAR, LIBS und die Erzeugung höherer harmonischer Wellenlängen.
Alle VENTO-Modelle sind aktiv gütegeschaltet, wassergekühlt und verfügen über ein kompaktes Gehäuse in OEM-Ausführung, welches für alle Wellenlängen und Leistungen identisch ist. Die Steuerung erfolgt über eine 25-polige DSub-Schnittstelle, die Versorgungsspannung beträgt 24 VDC.
Sehen Sie hier unsere komplette Auswahl an Lasern
Hier finden Sie unser gesamtes Photonik Portfolio
Alle Produkte unseres Herstellers Bright Solutions finden Sie hier
Eigenschaften:
- Wellenlänge: 532, 1064 nm
- Integrierter Verstärker (MOPA)
- Hohe mittlere Leistung: 60 W (1064 nm), 25 W (532 nm)
- Pulslängen: 500 ps - 2 ns
- Pulsenergie: Bis 750 µJ, Repetitionsrate: 50 - 200 kHz
- Aktive Güteschaltung, geringer Jitter
- Wasserkühlung
Anzeigegeräte für Laser Power Meter
Artikelnummer des Herstellers:
Plus-2
LaserPoint
Beschreibung:
Laserpoint Anzeigegeräte sind echte "Smart Displays", Instrumente, die einen angeschlossenen Messkopf automatisch erkennen. Dies gilt für mehr als 60 verschiedene Messköpfe, unabhängig davon ob diese mit Photodioden-, Thermopile- oder Positions-Sensor arbeiten. Ein Anzeigegerät für alle Messköpfe! Dies erlaubt dem Anwender jederzeit zusätzliche Köpfe zu seiner Ausrüstung zu addieren, ohne am Gerät selbst Änderungen vorzunehmen.
Betrachten Sie unsere große Auswahl an laser power meter
Betrachten Sie unser Portfolio von Photonik
Betrachten Sie alle Produkte unseres Lieferanten LaserPoint
Eigenschaften:
- Farb-Touchscreen-Display
- USB Ausgang
- Data Logging Funktion
- Konfigurierbarer Analogausgang
- Inklusive DLL Treiber
Hochspannungs-Generator
Artikelnummer des Herstellers:
615-10
Trek Inc
Beschreibung:
The Trek Model 615-10 is a precision high voltage AC/DC generator and amplifier system used in a broad range of R&D and production applications which include providing operating potentials required for electrostatic charger roller devices as used in electro-photographic processes.
View our wide range of Function / arbitrary waveform generators
View our portfolio of Test and Measurement products
See all products from our supplier Trek Inc
Eigenschaften:
- Monitors and controls AC/DC voltages over a wide frequency range with very high accuracy
- Output Voltage Range: 0 to 20 kV peak-to-peak
- Output Current Ranges:
- 0 to ±35 mA peak AC
- 0 to ±10 mA DC
- DC Bias Range: 0 to ±10 kV DC
- Three Modes of Operation: AC/DC Constant Voltage, AC/DC Constant Current, or Amplifier mode (with or without DC offset bias)
- Select Sine, Square, or Triangle wave output shape waveforms
- Four-quadrant high voltage output stage design extends frequency response
- INTERFACE connector permits remote operation
- High rejection of load current noise components
- CE compliant
Fourier-Transformations NIR-Spektrometer
Artikelnummer des Herstellers:
FT-NIR Rocket
ARCoptix
Beschreibung:
Mit der FT- Rocket Serie ist nun die dritte Generation von Miniatur Fourier Transform IR Spektrometer kommerziell verfügbar. Diese NIR Spektrometer basieren auf dem Prinzip eines selbst - kompensierenden Interferometers. Das bedeutet, dass Off-Axis Bewegungen, auf Grund von Vibrationen oder Temperaturvariationen, durch die beiden Interferometerarme kompensiert werden. Dadurch bleibt der Optische Wegunterschied (Gangunterschied) unverändert und erlaubt so eine exakte Messung auch in einem schwierigen Messumfeld.
Als Detektor wird, wie bei allen Interferometern, ein Einzelelement-Detektor (InGaAs) verwendet. Somit stellen diese FT- NIR Spektrometer nicht nur eine kostengünstige Alternative zu unseren Gitter NIR Spektrometern dar, sondern erschließen auch Anwendungen die bisher aufwendigen und teueren Laborsystemen vorbehalten waren.
Ebenso wie im Vorgänger-Modell wird in den FT- Rocket Spektrometern ein Referenz- Festkörperlaser verwendet, der eine exzellente Stabilität und Wellenlängen-Reproduzierbarkeit gewährleistet.
Das FT-NIR Rocket Spektrometer besitzt einen SMA Faser Eingang der es ideal für Faserbasierende Messungen macht. Für einen kompletten Messaufbau, können wir neben den Faser und Probenhalter auch NIR- Lichtquellen anbieten.
Betrachten Sie unsere große Auswahl an Spektroskopie Produkte
Betrachten Sie unser Portfolio von Photonik
Betrachten Sie alle Produkte unseres Lieferanten ARCoptix
Eigenschaften:
- Kompakt (weltweit kleinste FT-NIR) Breiter Spektralbereich 11000-3800cm-1(0.9-2.6µm)
- Herausragende Empfindlichkeit
- Hohe Auflösung 8cm-1 oder 4cm-1 wählbar
- Hohe Stabilität der Intensität und Wellenlänge (kein Basisliniendrift)
- USB betrieben
- SMA fasergekoppeltes System
- Keine spektralen Effekte zweiter Ordnung
- Kosteneffizient (Einzelelement Detektor)
LightSpionTM Goniometer
Artikelnummer des Herstellers:
LightSpionTM
Viso Systems
Beschreibung:
Einfache, schnelle und akkurate Messungen von Abstrahlwinkel, Lumen, Farbwiedergabeindex (CRI), Farbtemperatur und Lumen pro Watt. Das Goniometer beinhaltet u.a. ein Spektrometer und einen Leistungsanalysator. Der LightSpion beinhaltet die "Viso Light Inspector"-Software und wird über USB an den Computer angeschlossen wird. Die neueste Version der light inspectror software unterstützt jetzt auch Messung gemäß der EU Verordnung EU No 1194/2012. Normalerweise wird der Lichtstrom über den kompletten Raumwinkel gemessen. Die neue EU Verordnung verlangt aber, dass der Lichtstrom gerichteter Lichtquellen in einen 90° oder 120° Kegel gemessen wird.
Betrachten Sie unsere große Auswahl an Goniometern
Betrachten Sie unser Photonik Portfolio
Betrachten Sie alle Produkte unseres Lieferanten Viso Systems
Eigenschaften:
- Gewicht: 5 kg
- Maße: 41x28x10cm
- Leistungsbereich: 90-280VAC
- Maximale Lichtquellenleistung: 4Amp (880W @ 220V, 440 @ 110V)
- Messungen von: Lumen, Candela, CRI, Farbtemperatur, Lumen / Watt, Leistung und Leistungsfaktor.
- Großer Messbereich: 10 lm to 10000lm
- Maximale Lichtquellengröße: 80mm (Durchmesser)
- vorkalibrierte Plug & Play-Lösung
- Software kompatibel mit: Windows 2000, XP, 7 32bit - 64bit
T9602 series humidity and temperature sensor
Artikelnummer des Herstellers:
T9602 series
Amphenol Advanced Sensors
Beschreibung:
The T9602 offers the most advanced and cost-effective humidity and temperature sensing solution for virtually any type of application. Based on Amphenol’s capacitive polymer sensor chip and a CMOS integrated circuit with EEPROM are integrated into an easy mount OEM package.
Individually calibrated and tested the T9602 sensor chip performs at ±2% from 20% to 80% RH (±3% over entire humidity range), and is simple and ready to use without further calibration or temperature compensation. T9602 provides linearised output signals in various interfaces to customer requirements – I 2 C interface and PDM convertible to analogue signal.
Eigenschaften:
- Fully calibrated and temperature compensated
- Water resistant
- Digital or analogue output
- Optional wire length
- Precision and accuracy (±2% RH, ±0.3°C, 14 bit)
- Low current consumption
- Reliable in harsh environments
- Different mounting options
- Energy saving HVAC control – air conditioning, refrigeration, indoor air quality, vent fans, home appliances, humi/dehumidifiers
- Process control and instrumentation – medical instruments, handheld devices, weather stations, food processing, printers, RFIDs
Applications
High Temperature 8-Bit Microcontroller
Artikelnummer des Herstellers:
HT83C51DC
Honeywell - Magnetic
Beschreibung:
The HT83C51 is a monolithic 8-bit microcontroller that is pin equivalent to the Intel 8XC51FC microcontroller. The HT83C51 uses the standard MCS-51 instruction set which is optimized for control applications. Pin-for-pin equivalent to the MCS-51 series product, it is compatible with all known development environments. Key features include the programmable counter array, watch dog timer, enhanced serial port for multi-processor communication and a hierarchical interrupt structure. Software selectable idle is included for reduced power. The HT83C51 varies from the standard 83C51FC, in that it supports half-duplex serial communication, and has 8k Bytes of Mask programmable ROM. The device is available in a standard pinout DIP, with optional packages considered. These microcontrollers provide guaranteed performance supporting operating frequencies in excess of 16 MHz over the full -55 to +225°C temperature range. Typically, parts will operate up to +300°C for a year, with derated performance.
View our wide range of Processor/ Microcontroller
View our portfolio of Semicondcutors Components
See all products from our supplier Honeywell Magnetic
Eigenschaften:
- Specified Over -55 to +225°C
- On-Chip Oscillator
- 8-bit CPU Optimized for 5 Volt Control Applications
- Interrupt Structure with Seven Sources and Four Priority Levels
- Four 8-bit Bidirectional Parallel Ports
- Half Duplex Programmable Serial Port with Framing Error Detection and Automatic Address Recognition
- Three 16-bit Timer/Counters with One Up/Down Timer/Counter and Clock Out
- 256 Bytes Internal Data Memory
- 64K External Data Memory Address Space
- Hermetic 40-pin Ceramic Dip
- MCS-51 Compatible Instructions Set
- Parts burned in at 250°CC
- Programmable Counter Array with: Capture/Compare, Software Timer with Watchdog Capability, High Speed Output, and Pulse Width Modulator
ACT TWC912, Miniatur SMD Uhrenquarz
Artikelnummer des Herstellers:
TWC912
ACT
Beschreibung:
Freq. tol.: ±20, ±50, ±100ppm. Temp. range: -40 to +85°C. CL: 9, 12.5pF.
Read our FAQs for frequency control.
HL series development kit
Artikelnummer des Herstellers:
AirPrime HL series DK
Sierra Wireless
Beschreibung:
A complete development kit which provides all the tools and accessories you need to develop M2M and Wireless solutions with the HL series of modules. Develop and test with HL Series modules and develop an end user application and speed up delivery of prototypes.
The AirPrime® HL Series modules is the smallest, scalable, flexible solution that is interchangeable among 2G, 3G, and 4G* technologies. It provides voice and data connectivity in a single compact and easy-to-integrate form factor (22x23mm). The G version have an integrated GNSS receiver (GPS+Glonass). The compact form factor, network scalability, rich feature set and ready-to-use firmware upgrades make HL series modules ideal for industrial M2M solution designs where size and deployment longevity are important considerations.
* HL modules are ordered separately. 2G and 3G are available, 4G is in development.
Eigenschaften:
- Development kit includes:
- 1x HL series development kit mother board with HL socket
- 1x handset with cable
- 1x socket removal tool
- 1x power supply AC100/240V, DC 4V/2.5A
- 1x multiple AC outlet adaptor
- 1x 2G/3G antenna
- 1x GNSS antenna
- 1x handset with cable
The HL series provides voice and data connectivity in a single compact and easy-to-integrate form factor (22x23mm) covering 2G, 3G and 4G technologies. G versions have an integrated GNSS receiver (GPS+Glonass).
* HL modules are ordered separately. 2G and 3G are available, 4G is in development.
Te02 IR Akustooptische abstimmbare Filter, Öffnungswinkel 5,0°
Artikelnummer des Herstellers:
AOTF1331
Isomet
Beschreibung:
The AOTF1331 Acousto-Optic Tuneable Filter has been optimised for operation in the wavelength range of 2500 nm to 4000nm. The wavelength of the diffracted light is selected by application of a corresponding RF drive frequency. A thermal electric cooler (TEC) is fitted for applications requiring high temperature stability. Isomet grown Tellurium Dioxide (TeO2), is utilized as the interaction material.
View our wide range of Laser beam modulation products
View our portfolio of Photonics
See all products from our supplier Isomet
Eigenschaften:
- Wavelength: 2500nm - 4000nm
- Interaction Material: Tellurium dioxide (Te02)
- Aperture: 7.0mm x 7.0mm
- Frequency: 24MHz, 39MHz
- RF Drive Power: 4.0W nominal
- Acceptance Angle (V& H): 5.0° (Nominal)
AO abstimmbare variable Bandbreitenfilter, 400-700 nm
Artikelnummer des Herstellers:
AOTF1110-VB
Isomet
Beschreibung:
The AOTF-VB range of acousto-optic tuneable filters, are designed for use with broadband light sources and analytical imaging systems. The transmission characteristic of these solid state filters is controlled by the applied RF drive signal. The RF frequency defines the tuned wavelength of the diffracted light, whereas the signal amplitude defines the diffracted light intensity. The filter bandwidth is independently selected by enabling one or more of the four filter transducer electrodes via a compatible multi-output RF driver/amplifier.
View our wide range of Laser beam modulation products
View our portfolio of Photonics
See all products from our supplier Isomet
Eigenschaften:
- Wavelength: 400 – 700nm
- Interaction Material: Tellurium dioxide (Te02)
- Aperture: 10.0mm x 10.0mm
- Frequency: 50.5MHz, 66MHz, 71.5MHz, 78.5MHz
- RF Drive Power: 1.0W nominal
- Input polarization: Horizontal
- Input Acceptance Cone angle: 5 .7°
UV Holografische Gitter mit wiederholtem Standardraster, 1000 Furchen pro mm
Artikelnummer des Herstellers:
3-061H
Optometrics
Beschreibung:
3-061H serie are holographic replicated gratings with 1000 grooves per mm, a dispersion of 0.99 mrad at 250nm.
The substrate for a holographic grating is coated with a photosensitive (photo resist) material rather than the reflective coating used in ruled gratings. Since holographic gratings are produced optically, groove form and spacing are perfectly consistent. Holographic gratings are, therefore, free from the periodic and random spacing errors responsible for ghosts and stray light in ruled gratings. The result is that holographic gratings generate much less stray light than ruled gratings.
View our wide range of Optical components
View our portfolio of Photonics
See all products from our supplier Optometrics
Eigenschaften:
- Optimum Efficiency: UV
- Grooves per mm: 1000
- Dispersion nm/mrad: 0.99@250nm
- Dimensions available (mm): 12.7x12.7x 6, 25x25 x 6, 25x25 x 9.5, 30x30 x 9.5, 50x50 x 9.5, 12.5x25 x 6, 12.5x25 x 9.5, 25x50 x 9.5
N2-Laserlinien-Bandpassfilter, Mittelpunkt bei 337,1 nm
Artikelnummer des Herstellers:
CFBP00143-337-10
HB Optical
Beschreibung:
N2 laser line bandpass filter offer narrow bandwidth of 10nm for a center wavelength at 337.1nm. The center wavelength shifts linearly with temperature less than 0.02 nm/°C. Each filter is housed in a labelled, black-anodized aluminium ring.
View our wide range of Optical components
View our portfolio of Photonics
See all products from our supplier HB Optical
Eigenschaften:
- Laser type: N2
- Center Wavelength: 337.1nm
- Peak Transmission: 30%
- Diameter available: 10mm /12mm /25mm/25.4mm
- Operating Temperature Range: -50°C to +80°C /-50°C to +100°C
- Center Wavelength tolerance: ±20% of FWHM
- FWHM tolerance: ±20% of FWHM
- Blocking: X-ray - 1150nm, T=0.0001% or OD5
50/125 µm GEO50 GeoFibers™
Artikelnummer des Herstellers:
F13469
OFS
Beschreibung:
These fibres are designed for distributed temperature sensing applications, for higher temperature ranges up to 300°C. The fibres are protected against moisture and hydrogen ingression across the temperature range. They are resistant to water and chemicals, and cushioned for deployment and service in harsh environments.
View our wide range of Fibres, cables and assemblies
View our portfolio of Fibre optic components
See all products from our supplier OFS
200 µm Quarz Low OH 0,22 NA-Faser
Artikelnummer des Herstellers:
CF01493-51
OFS
Beschreibung:
Low OH concentration optimizes these fibres for use in the near-IR wavelengths. Biocompatibility features make these fibres ideal for laser surgery and other medical applications. The all-silica base construction creates a high damage threshold and high-performance optical properties. High temperature environments require the use of PYROCOAT® polyimide coating.
View our wide range of Fibres, cables and assemblies
View our portfolio of Fibre optic components
See all products from our supplier OFS
400 µm HCS® High OH 0,37 NA-Faser
Artikelnummer des Herstellers:
CF01493-20
OFS
Beschreibung:
For coupling to LED and laser sources, these larger core diameter fibres connect more efficiently and less expensively than single-mode or graded-index fibres. For medical applications, they are USP Class VI non toxic, biocompatible, and sterilizable. Part of the HCS fibre family, the 200 and 400 µm sized fibres are compatible with crimp and cleave termination.
View our wide range of Fibres, cables and assemblies
View our portfolio of Fibre optic components
See all products from our supplier OFS
ST Steckverbinder für 200 µm Step-Index HCS®
Artikelnummer des Herstellers:
BP05065-13
OFS
Beschreibung:
OFS ST bayonet style connector system is compatible with OFS Crimp and Cleave Termination Kits. The ST connector takes advantage of the advanced optomechanical properties of HCS fiber, attaching through mechanical means rather than traditional epoxy/polish. This saves time and greatly simplifies installer training requirements. It is an excellent solution for field connectorization and repair in harsh, industrial envronments. No epoxy, no curing, no polishing steps. Quick, easy, reliable.
View our wide range of Fibre optic cable termination products
View our portfolio of Fibre optic components
See all products from our supplier OFS
SMA 905 Steckverbinder für extreme Anforderungen (Harsh Enviroment, HE) für 200 µm Step-Index HCS®
Artikelnummer des Herstellers:
BP01016-32
OFS
Beschreibung:
OFS SMA 905 threaded connector system is compatible with OFS Crimp and Cleave Termination Kits. The SMA 905 connector takes advantage of the advanced optomechanical properties of HCS fiber, attaching through mechanical means rather than traditional epoxy/polish. This saves time and greatly simplifies installer training requirements. It is an excellent solution for field connectorization and repair in harsh, industrial environments. No epoxy, no curing, no polishing steps. Quick, easy, reliable.
View our wide range of Fibre optic cable termination products
View our portfolio of Fibre optic components
See all products from our supplier OFS
Crimp and Cleave SC Terminierungskit für 50 µm GiHCS 62,5 µm GiHCS
Artikelnummer des Herstellers:
DT03732-SC1
OFS
Beschreibung:
With the SC termination kit, Graded-Index HCS® (GiHCS®) Optical Fibre in 50, 62.5, and 200µm core sizes can be field terminated with SC connectors. Easy to learn and quick to connect! Associated insertion loss test kits measure performance after termination.
View our wide range of Fibre optic cable termination products
View our portfolio of Fibre optic components
See all products from our supplier OFS
CLBO-Kristalle
Artikelnummer des Herstellers:
CLBO
Altechna
Beschreibung:
CLBO (CsLiB6O10) (cesium lithium borate) is well known for it's very high optical damage threshold (25GW/cm2 at 1064nm for 1 ns pulses). It also has a wide transmission range (180nm - 2750 nm).
It is suitable for the generation highest harmonics (SHG, THG, 4HG, 5HG) of Nd:YAG laser radiation and the generation of second and third laser harmonics of alexandrite and Ti:sapphire lasers.
View our wide range of Rods and non-linear crystals
View our portfolio of Photonics
See all products from our supplier Altechna
Eigenschaften:
- High optical damage threshold (25 GW/cm2 for a 1 ns laser at 1064nm)
- Broad transparency range from 180 nm to 2750 nm
- For generation highest harmonics (SHG, THG, 4HG, 5HG) of Nd:YAG laser
- Orientation accuracy of cut angle: < 30 arcmin
- Optical damage threshold: >25GW/cm2 for 1ns pulses @ 1064 nm
Ti:Saphir-Laserkristalle, nichtlinear
Artikelnummer des Herstellers:
3-TS
Altechna
Beschreibung:
Ti:sapphire crystals have an absorption band in the green region. Radiation of around 500 nm is absorbed most effectively, however due to high availability and lower cost, green lasers (515 nm or 532 nm) are used to pump the medium. The crystal can be effectively pumped by short pulse flashlamps in laser systems of high pulse energy or by a DPSS laser - in tunable continuous wave lasers and high repetition rate oscillators.
View our wide range of Rods and non-linear crystals
View our portfolio of Photonics
See all products from our supplier Altechna
Eigenschaften:
- Broad lasing range: 660-1050 nm band
- Aperture, dimensions: ø 6mm or 6x6mm
- Excellent thermal conductivity
- Short upper-state lifetime (3.2 µs)
- High saturation power
- Relatively high laser cross-sections
- High damage threshold
- Strong Kerr effect
Nd:YLF-Laserkristallstäbe, nichtlinear
Artikelnummer des Herstellers:
3-ND11YLF
Altechna
Beschreibung:
Nd:LiYF is laser material alternative to Nd:YAG. Nd:YLF emission wavelengths are 1053, 1047, 1313, 1324, and 1370nm. Main Nd:YLF advantage over Nd:YAG is higher pulse energy at low (<2kHz) repetition rate.
View our wide range of Rods and non-linear crystals
View our portfolio of Photonics
See all products from our supplier Altechna
Eigenschaften:
- Anti reflection coating: 790-810nm & 1047-1053nm
- Material: Nd:LiYF4
- Low inhomogeneity
- Apertures up to 20mm
- Length up to 120mm
- Barrel side can be optimized for better heat andeling
- Type: Laser Crystals
4 GB, Compact Flash (CF), für die Nutzung im industriellen Bereich, PATA-Schnittstelle, SLC, -40 bis 85 °C
Artikelnummer des Herstellers:
CE04TFNHK-FD000-D
Delkin
Beschreibung:
Delkin's SLC Commercial and Industrial CompactFlash memory cards feature significant performance upgrades for industrial applications.
Commercial temperature not recommended for new designs. Please see -40°C to 85°C industrial temperature parts.
View our wide range of Memory / Storage products
View our portfolio of Semiconductors
See all products from our supplier Delkin
Eigenschaften:
- Wear Leveling
- ECC error correction
- Up to 50 MB/sec sustained write speed*
- Available in Commercial (0 to 70°C) and Industrial (-40 to 85°C) product grades
- Compliant with CompactFlash Specification Rev. 4.1
- Operating modes - Memory, PCMCIA I/O, True IDE (PIO6 and MDMA4) IDE UDMA4
- Compliant with European Union Directive 2002/95/EC (RoHS)
- Shock: 40g's at 11ms, MIL-STD-810, Method 516.6
- Vibration: 15Hz to 2,000Hz, MIL-STD-810, Method 514.5
- Humidity: 95% R-H, MIL-STD-810, Method 507.4
- Altitude: 80,000 feet
- Capacities supported: 64MB, 128MB, 256MB, 51 MB, 1GB, 2GB, 4GB, 8GB and 16GB
- NAND Single Level Cell flash (SLC)
- Supports 3.3-Volt and 5-Volt operation
- Fixed Drive available
- Solid State - no moving parts
- Ultrasonic welded case - No press fit components
- Available upon request - Custom CIS, mechanical features, labels and packaging
- All capacity configurations are available with optional proprietary conformal coating
128 GB MLC SlimSATA SSD Embedded-Flash-Modul für die Nutzung im industriellen Bereich
Artikelnummer des Herstellers:
ML1HNKCRB-XN000-D
Delkin
Beschreibung:
Delkin's SlimSATA SSD drive combines solid state reliability with SATA connectivity for significant performance advantages over traditional hard disk drives. Manufactured to JEDEC MO-297 form factor specifications, the SlimSATA SSD is suited to embedded industrial applications where space is restricted. Its shock, vibration, and temperature ratings permit application in extreme environments. The drives can achieve sustained read/write rates of up to 145/130MB/s and feature storage capacities from 4GB to 128GB.
View our wide range of Memory / Storage products
View our portfolio of Semiconductors
See all products from our supplier Delkin
Eigenschaften:
- Compliant with JEDEC MO-297
- SATA Revision 2.6 compliant, 1.5 and 3.0 Gb/s
- SLC capacities supported: 4GB, 8GB, 16GB, 32GB and 64GB
- MLC capacities supported: 8GB, 16GB, 32GB and 128GB
- Available in Commercial (MLC and SLC) and Industrial temperature ranges (SLC)
- Solid State Memory with ECC and wear leveling
- RoHS Compliant
- 5 Year Warranty - SLC Components
- 3 Year Warranty - MLC Components
256 MB, SD-/SDHC-Speicherkarte (für die Nutzung im industriellen Bereich), SLC, -40 bis 85 °C
Artikelnummer des Herstellers:
SE25TFKHL-C1000-D
Delkin
Beschreibung:
The Delkin Devices Secure Digital (SD) memory card is only the size of a postage stamp and the thickness of a credit card. Yet these solid state devices provide high speed performance and large storage capacity for many industrial applications. Delkin SD cards are a versatile storage solution for a wide variety of data. They feature built in write-protection to ensure data security.
View our wide range of Memory / Storage products
View our portfolio of Semiconductors
See all products from our supplier Delkin
The datasheet for this product is being updated. If you are interested in a technical specification for this product, please contact us.
Eigenschaften:
- Functionally compliant with SD specification version 1.1 and 2.0 (High Capacity)
- Operating bus modes - SD and SPI
- SD capacities supported: 128MB, 256 MB, 512 MB, 1 GB and 2 GB
- SDHC capacities supported: 4GB and 8GB
- Write Protect Switch
- Solid State Memory
- Supports 2.7 Volt to 3.6 Volt operation
- Error Correction Code (ECC)
- Wear Leveling algorithms for extended card life
- RoHS Compliant (Conforms to European Union Directive 2002/95/EC)
Differenzial-Schwarzkörper, Baureihe Infinity dB
Artikelnummer des Herstellers:
DB-04
Santa Barbara Infrared
Beschreibung:
The Infinity DB-04 differential blackbody is a 4 x 4 inch emitting area with a temperature range from -25°C to 150°C. The Infinity Series of Differential Blackbodies (DB Series) are designed to support the most critical IR testing requirements. The Infinity blackbodies offer the best performance available. Fast, stable, uniform, accurate and reliable, these blackbody systems provide performance enhancements and features that set them apart from previously available systems. A key feature is the new iProbe from SBIR. This intelligent temperature sensor is calibrated independently of the blackbody system. To re-calibrate the system you need only exchange the probe with a recently calibrated one.
View our wide range of Uniform sources and Camera test systems
View our portfolio of Photonics
See all products from our supplier Santa Barbara Infrared
Eigenschaften:
- Available Aperture Size: 4, 6, 8 and 12 inch
- Standard Temperature Range A: -25ºC to +75ºC ΔT, 0ºC to 100ºC Absolute
- Optional Range B: -25ºC to +150ºC ΔT, 0ºC to 175ºC Absolute
- Optional Range C: -20ºC to +75ºC ΔT, -40ºC to +100ºC Absolute
- Optional Range D: -20ºC to +150ºC ΔT, -40ºC to +175ºC Absolute
- Emissivity : > 0.970 (3µm to 5.5µm), > 0.950 (8µm to 14µm)
- Display resolution: 0.001ºC or 0.0001ºC
- Setpoint resolution: 0.001ºC
- Absolute Accuracy : ±0.007ºC for 0ºC
Ein Output 2,5 bis 5 W Geregelte Transformatoren
Artikelnummer des Herstellers:
47156
Myrra
Beschreibung:
Switching power supply with the same footprint as an EI30 transformer. 5W Regulated - 24V output. UL and VDE Certified
Eigenschaften:
- UL and VDE certified
- Universal input voltage
- Very low standby power consumption meets requirements of Energy Star or EC code of conduct
- Same footprint as EI30 transformer: Upgrade your application without redesign of PCB
- Class II - reinforced insulation
- Input / Output Isolation test voltage: 4000 Vac
- Input protection by integrated fusible resistor
- Output short circuit protection: automatic restarts when fault condition is removed
- Thermal shutdown with automatic recovery if internal temperature exceeds allowable value
90 W 5-12/5-12 V 4-Output ETD39 Zeilentransformator
Artikelnummer des Herstellers:
74060
Myrra
Beschreibung:
90W 5-12/5-12V 4-output ETD39 Flyback Transformerfrom Myrra. Designed for use in switch-mode power supplies construction confirms to CEI950, CEI335, CEI61558 for reinforced insulation and uses UL94-VO listed materials throughout.
Eigenschaften:
- Primary/Secondary Insulation >= 4000V
- Primary Auxiliary Insulation >= 1500V
- Creepage Distance Primary/Secondary >= 8mm
- Ambient Temperature < 50°C
- Construction confirms to CEI950, CEI335, CEI61558 for reinforced insulation
- Exclusively uses UL94-VO listed materials
Pulswandler
Artikelnummer des Herstellers:
74600
Myrra
Beschreibung:
Pulse transformer from Myrra. Toroid core design gives best coupling, lowest leakage inductance, fast rise time. This product has a construction conform to CEI950, CEI335, CEI61558 for Reinforced insulation (8 mm creepage distance) and uses only UL-V0 approved materials.
Eigenschaften:
- Toroid core gives best coupling, lowest leakage inductance, fast rise time.
- Pulse (E.t rating) is given for bipolar (symetrical) pulse. Value is reduced for unipolar pulse.
- These products are only composed of UL-V0 approved materials.
- Insulation test voltage : 4000 Vrms
- This product has a construction conform to CEI950, CEI335, CEI61558 for Reinforced insulation (8 mm creepage distance)
50/60 Hz Leiterplattenmontierte gekapselte Transformatoren - EI-Bereich
Artikelnummer des Herstellers:
44071
Myrra
Beschreibung:
50/60Hz PCB Mount Encapsulated Transformers - EI Range.
Eigenschaften:
- Vacuum filling
- Two compartments bobbins
- Self-extinguishing plastics UL 94 VO
- Degree of protection IP 00
- 70 grams weight
- Resin class B CEI 85 (20 000 h testing to CEI 126)
- Inherently short-circuits proof transformer
- UL approved primary versions: 24V, 48V, 240V (production on request)
- Insulation voltage 4 KV (6 KV MYRRA Test)
- 100 % tested production
- Certification : CCA procedure on request
Miniatur Fourier-Transformations-IR-Spektrometer, FT-IR Rocket
Artikelnummer des Herstellers:
FT-MIR Rocket
ARCoptix
Beschreibung:
Die FT-IR und FT-MIR Rocket Spektrometer sind fasergekoppelte Miniatur FTIR-Spektrometer (2-12 µm bzw. 2-6µm Wellenlänge), die leicht mit IR- Lichtquellen und IR Faser für Transmissions- und Reflexionsmessungen im Infrarot verwendet werden.
Das System verfügt über ausgezeichnete Empfindlichkeit dank eines zweistufig TE-gekühltem MCT-Detektor. Ein Referenz- Festkörperlaser gewährleistet hohe Stabilität und Wellenlängenreproduzierbarkeit.
Betrachten Sie unsere große Auswahl an Spektroskopie Produkte
Betrachten Sie unser Portfolio von Photonik
Betrachten Sie alle Produkte unseres Lieferanten ARCoptix
Eigenschaften:
- Sehr kompakt (weltweit kleinstes FT-IR Spektrometer)
- Breiter Spektralbereich: 2.0-12.0 µm
- Faser-Eingang (SMA-905)
- Hohe Auflösung von 4cm-1
- Kosteneffektivität
1GG5-8205-BLK 13,5 GHz Begrenzer
Artikelnummer des Herstellers:
1GG5-8205-BLK
Keysight MMIC
Beschreibung:
The 1GG5-8205 is a 13.5 GHz GaAs integrated diode limiter that can be used to protect sensitive RF circuits from excess RF power, DC transients, and ESD.
The circuit contains Planar-Doped-Barrier (PDB) diodes with integrated matching networks and is fabricated with the MB6A integrated diode process. The barrier height of each diode element and the number of diode elements in each 'stack' are optimized for low distortion when Pin <15 dBm, while limiting transmitted power when Pin >25 dBm.
View our wide range of Diode products
View our portfolio of RF components
See all products from our supplier Keysight MMIC
Eigenschaften:
- ESD Protection: 3000V Human Body Model
- Insertion Loss: 1.0 dB Typ.
- Port Match: S11 and S22 -15 dB Typ.
- Power Handling: P-1dB 25 dBm Typ.
- Distortion: SHI >100 dBm Typ; THI +43 dBm Typ; TOI +43 dBm Typ.
1 W 5 V DC Eingang, 5 V DC 200 mA DC/DC-Wandler
Artikelnummer des Herstellers:
EC1SA01N
Cincon
Beschreibung:
1W 5VDC Input, 5VDC 200mA DC-DC Converters
View our wide range of DC/DC products
View our portfolio of Power supplies
See all products from our supplier Cincon
Eigenschaften:
- Industry Standard SIP and SMD Packages
- Efficiency up to 83%
- 1000VDC Isolation
- Low Cost
- Unregulated Outputs
- Low Ripple and Noise
- No Tantalum Capacitors inside
30 W 9-36 V DC Eingang, 6000 mA 4:1 DC DC/DC-Wandler
Artikelnummer des Herstellers:
EC9BW-24S05
Cincon
Beschreibung:
30W 9 to 36VDC Input, 6000mA 4:1 Input Range DC-DC Converters
View our wide range of DC/DC products
View our portfolio of Power supplies
See all products from our supplier Cincon
Eigenschaften:
- 30W Isolated Output
- Efficiency to 91%
- 1" X 2" Six-Sided Shield Metal Case
- 4:1 INPUT RANGE
- Regulated Outputs
- Fixed Switching Frequency
- Input under-voltage Protection
- Over Current Protection
- Remote ON/OFF
- Continuous Short Circuit Protection
- Without Tantalum Capacitors inside
Stokes Polarimeter für die wissenschaftliche Forschung
Artikelnummer des Herstellers:
Research Grade Stokes Polarimeters
Hinds
Beschreibung:
Das Stokes Polarimeter von Hinds Systems bietet eine sehr hohe Auflösung und Empfindlichkeit für die Messung des Polarisationszustandes einer Lichtquelle. Das Dual PEM Stokes Polarimeter erfasst alle vier Stokes Vektoren (normalisiert) mit einer einzigen Messung. Das Gerät hat keine beweglichen Teile und ist somit sehr zuverlässig. Die hohe Empfindlichkeit, die Wiederholgenauigkeit und die einfache Bedienung machen das Polarimeter ideal für den Einsatz in der Astronomie, Faseroptik, Qualitätskontrolle in der Laserherstellung und der wissenschaftlichen Arbeit.Das „Turnkey“-System umfasst das optische Modul, die Ansteuerelektronik, Software und den Systemrechner. Das optische Modul besteht aus zwei photoelastischen Modulatoren (PEM´s); diese generieren die vier Stokes Parameter mit einer einzigen Messung. Verschiedene Optionen sind erhältlich, beispielsweise für die Messung einer einzigen Wellenlänge oder spektroskopische Aufgabenstellungen unter anderem im sichtbaren, NIR, IR und DUV. Die Systemsoftware kalibriert die PEM´s für die unterschiedlichen Wellenlängen. Weiterhin ist ein Fasereingang vorgesehen. Das elektrische Signal kann entweder über eine Fourier-Analyse oder mittels eines „lock-in“ Verstärkers ausgewertet werden.
Betrachten Sie unsere große Auswahl an Laserstrahl Modulation
Betrachten Sie unser Portfolio von Photonik
Betrachten Sie alle Produkte unseres Lieferanten Hinds
Eigenschaften:
- Auswertung der Stokes-Vektoren
- Keine beweglichen Bauteile
- Wechsel auf andere Wellenlängen
- Sehr robust und tragbar
- Großer Akzeptanzwinkel
- UV-Vis: 180nm bis 850nm
- NIR: 800nm bis 2,5µm
- Mid-IR: 1,5µm bis 15µm
- NIR-Faser-Polarimeter: 1330nm, 1550nm
- Genauigkeit der Stokes Vektoren: 1%
- Sensitivität: 0,0005
- Einzelmessung für die Charakterisierung
- Hochgeschwindigkeitsmodulation
Lasermodule für die Gassensorik
Artikelnummer des Herstellers:
WD-3360-000-A-A-E
NEL Photonics Business Group
Beschreibung:
500 µW, 3360 nm Wellenlängen-Konversions-Laser zur Methan-Detektion
Betrachten Sie unsere große Auswahl an Gassensorik Produkte
Betrachten Sie unser Portfolio von Sensoren
Betrachten Sie alle Produkte unseres Lieferanten NEL Photonics Business Group
Eigenschaften:
- Wellenlängen-Konversions Mid-IR Laser Opti λ 3360.
- Kompakte Wellenlängen-Konversions-Lichtquelle für Anwendungen der Gasmesstechnik, z.B. Methan bei 3360 nm. Weitere Wellenlängen verfügbar auf Anfrage.
Photoelastische Modulatoren, PEM, für Polarisationsänderung (UV - THz)
Artikelnummer des Herstellers:
I/CF50
Hinds
Beschreibung:
Mit Photoelastischen Modulatoren (PEM) kann die Polarisation von Licht gezielt verändert werden. Der Photoelastische Modulator PEM100 von HINDS der Serie I verfügt über eine rechteckige Apertur bis 22 mm. Die optischen Kristalle CaF und Fused Silica mit Modulationsfrequenzen von 20 kHz und 50 kHz ermöglichen eine Phasenverzögerung um λ/4 oder λ/2 im UV, sichtbaren und NIR-Wellenlängenbereich bis 2 µm.
PEM100 der Serie II besitzen eine quasi runde, oktagonale Apertur bis zu 56 mm. Dank der Viezahl der optischen Kristalle – CaF, Fused Silica, Si, ZnSe mit Modulationsfrequenzen von 20 kHz bis 84 kHz – kann die Serie II für den Wellenlängenbereich von sichtbarem Licht über NIR, MIR und IR bis in den THz-Bereich verwendet werden.
Eigenschaften:
- Optische Kristalle: CaF, Fused Silica, Si, ZnSe
- Phasenverzögerung λ/4 bzw. λ/2: 130 nm – THz
- Modulationsfrequenzen: 20 – 84 kHz
- Apertur: 13 – 56 mm, rechteckig oder oktagonal
Lasermodule für die Gassensorik
Artikelnummer des Herstellers:
WH-0760-001-F-B-C
NEL Photonics Business Group
Beschreibung:
2 mW, 760 nm Wellenlängen-Konversions-Laser zur Sauerstoff-Detektion
Betrachten Sie unsere große Auswahl an Gassensorik Produkte
Betrachten Sie unser Portfolio von Sensoren
Betrachten Sie alle Produkte unseres Lieferanten NEL Photonics Business Group
Eigenschaften:
- 760 nm Wellenlängen-Konversions-Modul zur Sauerstoff-Detektion.
- Singlemode 760 nm Laserlicht wird durch second harmonic Generation einer DFB-LD Pumplichtquelle bei 1520 nm erzeugt.
- Das Modul besteht aus DFB-LD, PPLN Wellenleiter, thermoelektrischem Kühler und Thermistor.
2 A Lithium-Ionen-/Polymer-Akkuladegerät
Artikelnummer des Herstellers:
AAT3697IWP-4.2-T1
Skyworks
Beschreibung:
The AAT3697 Battery Manager is a highly integrated single-cell lithium-ion/polymer battery charger IC designed to operate with AC adapter inputs. It requires a minimum number of external components. The AAT3697 precisely regulates battery charge voltage and current for 4.2V lithium-ion/polymer battery cells. Adapter charge current rates can be programmed up to 2.0A. An active thermal management system regulates the fast charge constant current for all ambient temperature and input vs. output voltage conditions. Battery temperature and charge state are fully monitored for fault conditions. In the event of an over-voltage or over-temperature failure, the device will automatically shut down, thus protecting the charging device, control system, and the battery under charge. Status monitor output pins are provided to indicate the battery charge status by directly driving two external LEDs. A serial interface output is available to report 12 various charging status states to a microcontroller. The AAT3697 is available in a Pb-free, thermally-enhanced, space-saving 12-pin TDFN 3x3mm package and is rated over the -40°C to +85°C temperature range.
View our wide range of Analogue / Mixed signal products
View our portfolio of Semiconductors
See all products from our supplier Skyworks
Eigenschaften:
- Input Voltage Range: 4.0V to 5.5V
- Up to 2.0A Charging Current
- Adapter Present Indicator (ADPP#)
- High Level of Integration with Internal: Charging Device, Reverse Blocking Diode, Current Sensing
- Active Thermal Loop Charge Reduction
- Automatic Recharge Sequencing
- Battery Temperature Monitoring
- Full Battery Charge Auto Turn-Off / Sleep Mode
- Over-Voltage, Over-Current, and Over-Temperature Protection
- Power On Reset and Soft Start
- Serial Interface Status Report
- 12-Pin 3x3mm TDFN Package
- -40°C to +85°C Temperature Range
ChipCap 2 series humidity and temperature sensor
Artikelnummer des Herstellers:
CC2 series
Amphenol Advanced Sensors
Beschreibung:
The ChipCap 2 series offers the most advanced and cost-effective humidity and temperature sensing solution for virtually any type of application. A capacitive polymer sensor chip and a CMOS integrated circuit with EEPROM are integrated into one embedded system in a reflow solderable SMD package. Individually calibrated and tested, ChipCap 2 performs at ±2% from 20% to 80% RH (±3% over entire humidity range), and is simple and ready to use without further calibration or temperature compensation.
Eigenschaften:
- Fully calibrated and temperature compensated
- Digital or analogue output with alarm function
- Precision and accuracy (±2%RH, ±0.3°C, 14 bit )
- Free operating voltage (min 2.7V to max 5.5V)
- Low current consumption
- SMD package for automated assembly
- Reliable in harsh environments
Lt425 4 Megapixel CMOSIS-basierte Kamera USB 3.0
Artikelnummer des Herstellers:
LT425
Lumenera
Beschreibung:
High Resolution CMOS Sensor with Global Shutter Lumenera's Lt425 enclosed digital camera is built for rugged 24/7 use. A proven high resolution 1' CMOS sensor with a fully electronic global shutter that captures excellent quality, high-speed images with zero blur. The industrial-grade version of this camera is ideally suited for applications that include traffic monitoring, Automatic License Plate Recognition (ALPR), high-speed inspection and motion control. This camera can be customized to suit OEM designs and is available in a scientific-grade version. High Quality Images at High Speed The Lt425 was created for speed using the latest USB 3.0 technology to ensure the fastest image delivery even at its largest resolution. Image captures can be synchronized using either a hardware or software trigger and is complemented by 128 MB of onboard memory that is used for frame buffering to ensure full image delivery. Plug-and-Play with No Framegrabber The compact, light weight design of this camera, measuring 40 x 40 x 53 mm, ensures easy integration into tight spaces and enclosures. The fully locking USB 3.0 cabling and digital interface ensure a simple plug-and-play installation. No frame grabber is required. Simplified I/O cabling is provided through a locking Hirose connector supporting external power input along with 1 optically isolated output, 1 optically isolated input and 2 configurable I/O ports. Maximize Camera Performance Within Your Own Application The Lumenera Camera SDK provides a full suite of features and functions that allow you to maximize the camera's performance within your own vision application. The SDK is compatible with all of our USB and GigE-based cameras. Microsoft DirectX/DirectShow, Windows API and .NET API interfaces are provided, allowing you the choice of application development environments from C/C++ to VB.NET or C#.NET. Superior Technical Assistance Center All Lumenera cameras are supported by an experienced team of technical support and imaging experts. We understand your imaging needs and are here to help you get the most out of your camera.
View our wide range of CCD/CMOS Cameras
View our portfolio of Imaging for Science and Industry products
See all products from our supplier Lumenera
Eigenschaften:
- Industry proven CMOSIS CMV4000 CMOS 4.0 megapixel sensor with electronic global shutter
- SuperSpeed USB 3.0 interface for fastest image delivery and simplified connectivity
- Compact, robust form factor measuring 40 x 40 x 53 mm with 16 mounting points
- 90 fps at full resolution
- Color, monochrome or NIR CMOS sensor with 1 inch optical format providing a resolution of 2048 x 2048 using 5.5 μm2 pixels
- Locking industrial micro USB and Hirose GPI/O connector for power and control of peripherals and synchronization of lighting
- 4 GPI/O: 1 optically isolated output. 1 optically isolated input and 2 configurable I/O ports
- 128 MB RAM frame buffer
- Simplified cabling - video, power and full camera control over a single micro USB 3.0 cable
- Region of Interest (ROI) option improves sensitivity and provide higher frame rates
- Select 8 or 12-bit pixel data
- FCC Class B, CE Certified
- DirectShow compatible
- Software compatible with Windows XP, Windows Vista, Windows 7, 32 and 64-bit operating systems
- Complete SDK available
- Full one (1) year warranty
14,3 x 9,3 mm Ofengesteuerter Kristalloszillator
Artikelnummer des Herstellers:
NK
Taitien
Beschreibung:
Stability range: 0.1 (Ambient), Voltage: 3.135 to 3.465, Temp. range: -40 to +85°C
14.3 x 9.3 mm Oven Controlled Crystal Oscillator
NK 14.3 x 9.3 mm Oven Controlled Crystal Oscillator
View our wide range of OCXO products
View our portfolio of Frequency control products
See all products from our supplier Taitien
Eigenschaften:
- Dimension 14.3 x 9.3 x 6.0 mm typical
- Stratum 3 (Overall ±4.6 ppm including 10 years aging)
Linearer OmniPower-LDO-Regler
Artikelnummer des Herstellers:
AAT3200IGY-3.0-T1
Skyworks
Beschreibung:
The AAT3200 PowerLinear OmniPower low dropout (LDO) linear regulator is ideal for systems where a low-cost solution is required. This device features extremely low quiescent current, typically 20μA. Dropout voltage is also very low, typically 200mV. The AAT3200 has output short-circuit and over-current protection. In addition, the device has an over-temperature protection circuit which will shut down the LDO regulator during extended overcurrent events. The AAT3200 is available in a space-saving, Pb-free SC59 package. The device is rated over a -40°C to +85°C temperature range. Since only a small, 1μF ceramic output capacitor is required, the AAT3200 is a truly cost-effective voltage conversion solution. The AAT3201 is a similar product for this application, especially when a shutdown mode is required for further power savings.
View our wide range of Analogue / Mixed signal products
View our portfolio of Semiconductors
See all products from our supplier Skyworks
Eigenschaften:
- 150mA Output
- 20µA Quiescent Current
- Low Dropout: 200mV (typical)
- High Accuracy: ±2.0%
- Current Limit Protection
- Over-Temperature Protection
- Low Temperature Coefficient
- Factory-Programmed Output Voltages: 2.0V to 3.5V
- Stable Operation With Virtually Any Output Capacitor Type
- 3-Pin SC59 Package
Hochempfindliches Photometer
Artikelnummer des Herstellers:
PR-810L Ultra-Sensitive Photometer
Photo Research Inc
Beschreibung:
Haupteinsatzgebiet unserer Filterphotometer ist die Messung sehr geringer Leuchtdichten sowie die Kontrastmessung, z.B. an Displays. Der Unterschied zu den Spektroradiometern besteht darin, dass hier ein Einzelelementdetektor, ein Photomultiplier (PMT), anstelle einer Photodiodenzeile verwendet wird.
Das ermöglicht sehr schnelle Messzeiten auch bei sehr geringen Leuchtdichten. In allen Geräten werden speziell angepasste V(λ)-Filter verwendet, die an die theoretische Kurve nach CIE angepasst sind. Unsere Photometer sind standardmäßig mit Li-Ion Batterie für den mobilen Einsatz und USB Schnittstelle ausgestattet. Um eine größtmögliche Flexibilität zu erreichen, besitzen unsere Photometer ein Aperturrad mit einer 3°,1°,0.5° und 0.125° Apertur, um unterschiedlich große Messflächen sowie Leuchtdichten messen zu können. Das PR 810-L ist zusätzlich noch mit einem automatisierten Neutraldichte-Filterrad ausgestattet, das 3 Größenordnungen an Abschwächung gewährleistet (10X, 100X und 1000X). Ebenso können unsere Photometer mit Kosinuskorrektoren oder Ulbrichtkugeln ausgestattet werden, wenn neben der Leuchtdichte auch die Beleuchtungsstärke oder der Lichtstrom gemessen werden soll.
Betrachten Sie unsere große Auswahl an Spektroradiometer Photometer und Lichtmesssysteme
Betrachten Sie unser Portfolio von Photonik
Betrachten Sie alle Produkte unseres Lieferanten Photo Research Inc
Eigenschaften:
- Ultra-Low light photometer
- Luminance accuracy (Against NIST luminance standard): ± 2%
- Luminance repeatability : ≤ 1% *
- Display : 3.5 inch Color Touch Screen Display
- Measurement Time: 200 ms to 10 secs
- AutoSync Range: 20 to 400 Hz.
- Full Color Touch Screen Display
- USB Interface
- Long lasting rechargeable Li-Ion battery
- SD Memory
Spektroradiometer PR-655, SpectraScan® Photo Research
Artikelnummer des Herstellers:
PR-655 Spectroradiometer
Photo Research Inc
Beschreibung:
Spektroradiometer arbeiten nach dem Prinzip der Pritchard-Optik, bei der die Messapertur als schwarzer Fleck im Bildfeld zu erkennen ist, was die Justage auf das Messobjekt besonders einfach macht. Alle unsere Spektroradiometer messen simultan das Spektrum, die Leuchtdichte, Farbort nach CIE, Farbtemperatur und eine Reihe weiterer photometrischer Parameter. Je nach Anforderungen unterscheiden wir zwischen den folgenden Modellen.
Das PR655 ist der Nachfolger des PR650, dem wahrscheinlich populärsten Spektroradiometer der Welt. Das portable PR-655 bietet neben seiner Photodioden-Zeile mit 128 Elementen, einen Shutter, der automatisch nach jeder Messung eine Dunkelstrom Messung durchführt, um die bestmögliche Genauigkeit zu erreichen.
Betrachten Sie unsere große Auswahl an Spektroradiometern
Betrachten Sie unser Photonik Portfolio
Betrachten Sie alle Produkte unseres Lieferanten Photo Research Inc
Eigenschaften:
- Detektor: 128 Element Detektor Array
- Wellenlängenbereich des Spektroradiometers: 380 bis 780 nm
- Digitale Auflösung: 16 bits
- Spektrale Auflösung: 3,12 nm / Pixel
- Spektrale Bandbreite 8 nm (5 nm optional)
- Spektrale Genauigkeit: ± 1 nm
- Leuchtdichtebereich: 0.7 bis103.000 cd/m²
- Leuchtdichte Genauigkeit (Gegenüber NIST Standard): ± 2%
- Leuchtdichte Wiederholgenauigkeit: ≤ 1%
- Farbortgenauigkeit (für Lichtquelle A): ± 0,0015 für CIE 1931 x, y
Spektroradiometer PR-670, SpectraScan® Photo Research
Artikelnummer des Herstellers:
PR-670 Spectroradiometer
Photo Research Inc
Beschreibung:
Mit dem Spektroradiometer PR 670 erhalten Sie eine noch größere Flexibilität als mit dem PR655. Es besitzt neben einer Photodioden Zeile mit 256 Elementen standardmäßig ein Apertur-Rad mit einer 1°, 1/2°, 1/4°, und ein 1/8° Apertur. Dadurch können kleinere Messflecke sowie ein größerer Leuchtdichtebereich gemessen werden. Wie alle Spektroradiometer der PR600 Serie kann es ohne Laptop/PC betrieben werden. Die Daten werden auf einer SD Karte gespeichert und können später über die Software SpectraWin 2 ausgelesen und weiterbearbeitet werden.
Betrachten Sie unsere große Auswahl an Spektroradiometer
Betrachten Sie unser Photonik Portfolio
Betrachten Sie alle Produkte unseres Lieferanten Photo Research Inc
Eigenschaften:
- Wellenlängenbereich des Spektroradiometers: von 380 bis 780 nm
- Spektrale Bandbreite: 8 nm (5 nm optional)
- Spektrale Genauigkeit: ± 1 nm
- Leuchtdichtebereich: 0.03 bis 8.500.000 cd/m
- Leuchtdichte Genauigkeit (gegenüber NIST Standard): ± 2%
- Leuchtdichte Wiederholgenauigkeit: ≤ 1%
- Farbortgenauigkeit (für Lichtquelle A): ± 0,0015 für CIE 1931 x, y
- Farb-Touchscreen-Display
- Großer Dynamikbereich
- USB-Schnittstelle
- Bluetooth fähig (optional)
Spektroradiometer PR-680, SpectraDuo Photo Research
Artikelnummer des Herstellers:
PR-680L Spectroradiometer
Photo Research Inc
Beschreibung:
Das PR-680 Spektroradiometer ist die konsequente Weiterentwicklung des PR-670. Neben der Photodioden Zeile mit 256 Elementen enthält es zusätzlich eine extrem empfindliche Photomultiplier Tube (PMT). Bei sehr geringen Leuchtdichten wechselt das PR680 automatisch vom Spektroradiometer Modus in den Photometer Modus und erlaubt so weiterhin sehr schnelle Messungen bei extrem kleinen Leuchtdichten. Dadurch wird bei dem PR680-L ein Kontrastbereich von 1.100.000.000 :1 erreicht.
Betrachten Sie unsere große Auswahl an Spektroradiometern
Betrachten Sie unser Photonik Portfolio
Betrachten Sie alle Produkte unseres Lieferanten Photo Research Inc
Eigenschaften:
- Detectors:256 linear array and PMT
- Wavelength range: 380 to 780 nm
- Spectral Resolution: 1.56 nm / pixel
- Spectral bandwidth: 8 nm (5 nm optional)
- Spectral Accuracy: ± 1 nm
- Luminance Range: 0.00007 - 5,000,000 fL †
- Liminance accuracy: (Illuminant A) ± 2% * for both detectors
- Luminance precision: ≤ 1% *
- Color Accuracy: (for Illuminant A) ±0.0015 * in CIE 1931 x,y
Series-Connect Digitaler Stromsensor
Artikelnummer des Herstellers:
CSDD1FR
Honeywell - Sensors
Beschreibung:
Series-connect current sensors produce a digital logic level output. When the current being sensed reaches a predetermined level, the output changes state.
Operating Principle: The sensor, wired in series with the current being sensed, detects the magnetic field surrounding a current-carrying conductor. This current path is passed through a flux collector inside the package, and the magnetic field is concentrated at the internal digital Hall effect sensing element. The magnetic field is proportional to the current passing through the conductor. Thus, there is a relationship between the output state of the current sensor and the level of current. Housing material: PET polyester.
View our wide range of Current sensors
View our portfolio of Sensors
See all products from our supplier Honeywell - Sensors
Eigenschaften:
- Digital logic level output
- Miniature size
- Encapsulated for physical protection
- Interchangeability
- Printed circuit board mountable
- Transient protection provided on I.C.
- Output voltage isolation from input
- 40 mA current sinking output
Miniatur-Stromsensor mit offenem Stromkreis, 100 A
Artikelnummer des Herstellers:
CSLT6B100
Honeywell - Sensors
Beschreibung:
Honeywell's CSLT Series miniature, open-loop current sensors incorporate our SS490 Series miniature ratiometric linear Hall effect sensor (MRLTM). The sensing element is encapsulated in a printed circuit board-mountable plastic package.
The combination of sensor, flux collector and housing comprises the current sensor assembly. These sensors are ratiometric.
View our wide range of Current sensors
View our portfolio of Sensors
See all products from our supplier Honeywell - Sensors
Eigenschaften:
- Open-loop, through-hole design
- Output voltage isolation from input
- AC or DC current sensing
- Linear ratiometric output
- Current sinking or sourcing output for interfacing flexibility
- Fast response time
- Compact size
- Accurate, low-cost sensing
- Minimum energy dissipation
- Maximum current limited only by conductor size
- Built-in temperature compensation promotes reliable operation
- Operating temperature range -25 °C to 100 °C [-13 °F to 212 °F]
- RoHS compliant (lead-free)
0,45-6,0 GHz Rauscharmer Transistor
Artikelnummer des Herstellers:
SKY65050-372LF
Skyworks
Beschreibung:
The SKY65050-372LF is a high performance, n-channel low noise transistor. The device is fabricated from Skyworks advanced depletion mode pHEMT process and is provided in a 2.20 x 1.35 x 1.10 mm, 4-pin SC-70 package.
View our wide range of Transistor products
View our portfolio of RF components
See all products from our supplier Skyworks
Eigenschaften:
- Externally matched for wideband operation
- Noise Figure = 0.45 dB @ 2.4 GHz of device only
- Noise Figure = 0.65 dB @ 2.4 GHz including matching network loss
- Gain = 15.5 dB @ 2.4 GHz
- OIP3 = +23.5 dBm @ 2.4 GHz, VDD = 3 V, IDD = 20 mA
- P1dB = +10.5 dBm @ 2.4 GHz, VDD = 3 V, IDD = 20 mA
- Adjustable supply current, 5 to 55 mA
- Small, SC-70 (4-pin, 2.20 x 1.35 x 1.10 mm) package (MSL3, 260 ?C per JEDEC J-STD-020)
Hall-Effekt, Stromsensor mit offenem Stromkreis, Gallant Steckverbinder, 100 A rms Nominal
Artikelnummer des Herstellers:
CSCA0100A000B15B02
Honeywell - Sensors
Beschreibung:
The CSCA-A Series of open-loop current sensors are based on the principles of the Hall-effect wherein a Hall-effect device (HED) produces an output voltage linearly related to the amplitude and phase of a magnetic field applied to it.
Current flowing through a primary conductor generates a rotating magnetic field around the conductor. This field is collector by a core of magnetically sensitive material and concentrated in the gap in this core. The HED is located in this core gap. Therefore, the HED output is directly proportional to the amplitude and phase of the primary current.
The HED output is trimmed for gain and offset calibration such that the CSCA-A Series sensor provides a predefined output sensitivity versus primary current.
View our wide range of Current sensors
View our portfolio of Sensors
See all products from our supplier Honeywell - Sensors
Eigenschaften:
- Measures ac, dc and impulse currents
- Competitive cost/performance ratio
- Low power consumption
- Compact size
- High level of electrical isolation between primary and secondary circuits
- Large primary aperture
- RoHS compliant
- CE, UL approvals (pending)
Gütegeschalteter DPSS Laser 1064nm bis 40W
Artikelnummer des Herstellers:
LUCE
Bright Solutions
Beschreibung:
Der CW-gütegeschaltete Kurzpuls-DPSS Laser LUCE ist mit Wellenlängen 1064 nm, 532 nm und 355 nm und Leistungen bis 40 W (1064 nm) verfügbar. Aufgrund seiner hohen Pulsspitzenleistung und exzellenten Strahlqualität ist LUCE für nahezu jede industrielle und wissenschaftliche Anwendung geeignet. Darüber hinaus bietet sein kompaktes, luftgekühltes Design ein optimales Kosten-Nutzen-Verhältnis für Systemintegratoren. LUCE ist auch in kundenspezifischen Ausführungen erhältlich.
Betrachten Sie unsere große Auswahl an Laser
Betrachten Sie unser Portfolio von Photonik
Betrachten Sie alle Produkte unseres Lieferanten Bright Solutions
Eigenschaften:
- LUCE - 40W 1064 nm
- Power: Up to 40 W
- 200 kW Peak Power
- Up to 200 kHz repetition rate
- Wavelength: @1064 @532 @355 nm
- Air Cooling
- Operation Mode at 1064nm CW available
Hohlraum-Schwarzkörper, Baureihe 4100
Artikelnummer des Herstellers:
4100
Santa Barbara Infrared
Beschreibung:
The unique cavity construction of the Model 4100 preserves the high emissivity of traditional cavity blackbody designs, but greatly improves the uniformity and slew rate of the system. A high-resolution enhanced PID temperature servo provides zero drift and low jitter control of the emitting surfac's temperature. The 4100 High Temperature Cavity Blackbody is an ideal choice for applications where high temperature and high performance are a requirement.
View our wide range of Uniform sources and Camera test systems
View our portfolio of Photonics
See all products from our supplier Santa Barbara Infrared
Eigenschaften:
- Temperature range : 50ºC to 1000ºC Absolute
- Exit aperture : 1 inch diameter cavity
- Emiissivity: 0.98, 2µm to 14µm
- Setpoint resolution : 0.1°C
- Display resolution : 0.1°C
- Slew rate, (Approximate Heating Rate 100ºC to 1000ºC) <60 minutes
Zoom-Strahlaufweitung für sichtbares Licht und 1064 nm
Artikelnummer des Herstellers:
BXZ-VIS-NIR
Wavelength Opto-Electronic
Beschreibung:
Die Zoom-Strahlaufweiter der Serie BXZ ist flexibel für den Bereich vom UV bis NIR. Diese Serie kann motorisiert oder manuell betrieben und für verschiedene Strahldurchmesser ausgelegt werden.
Betrachten Sie unsere große Auswahl an Optische Komponenten
Betrachten Sie unser Portfolio von Photonik
Betrachten Sie alle Produkte unseres Lieferanten Wavelength Opto-Electronic
Eigenschaften:
- Einstellbare Vergrößerung von 1- bis 8-fach
- Einstellbare Divergenz
- Wellenbereich von 266 bis 1550 nm
Richtungsablenkender Film (DTF Directional Turning Film)
Artikelnummer des Herstellers:
DTF
Luminit
Beschreibung:
Luminit's Direction Turning Film (DTF) besteht aus linearen nicht-symmetrischen Mikroprismen, welche die Ablenkung einer nahezu kollimierten Lichtquelle um 20° bewirken. Direction Turning Filme können mit Light Shaping Diffuser kombiniert werden, um den Strahl gleichzeitig zu formen und abzulenken.
Betrachten Sie unsere große Auswahl an Light Shaping Diffuser
Betrachten Sie unser Portfolio von Photonik
Betrachten Sie alle Produkte unseres Lieferanten Luminit
Eigenschaften:
- Direction Turning Film: Standardablenkung 20°
- Substrat: Polycarbonat 0.010" (0.25 mm) dick
- Transmission 400 nm bis 800 nm
- Temperaturbereich: -30°C bis 80°C
- Luftfeuchtigkeit > 95 % ± 5 % RH über 24 Std.
- Härte > 2H
- Vergilbung 2.6% bei direkter Bestrahlung (über 600 Std.)
- Reinigung mit Methanol
266 - 1064 nm ns DPSS Laser, hohe Pulsspitzenleistung
Artikelnummer des Herstellers:
WEDGE
Bright Solutions
Beschreibung:
WEDGE ist in zwei Ausführungen für die Wellenlängen 266, 355, 532 und 1064 nm erhältlich:
Dank der Vielfalt an Wellenlängen, Pulslängen, Pulsenergien und Repetitionsraten ist WEDGE eine ideale Laserquelle für wissenschaftliche und industrielle Anwendungen in den Bereichen BioImaging, LIDAR / LIBS, Nichtlineare Spektroskopie und Mikromaterialbearbeitung. Alle WEDGE-Modelle sind aktiv gütegeschaltet, luftgekühlt und verfügen über ein kompaktes Gehäuse in OEM-Ausführung, welches für alle Wellenlängen und Leistungen identisch ist. Die Steuerung erfolgt über eine 25-polige DSub-Schnittstelle, die Versorgungsspannung beträgt 24 VDC.
Betrachten Sie unsere große Auswahl an Laser
Betrachten Sie unser Portfolio von Photonik
Betrachten Sie alle Produkte unseres Lieferanten Bright Solutions
Eigenschaften:
- Wellenlängen: 266, 355, 532, 1064 nm
- Pulsenergie bis 4 mJ
- Pulslängen: 500 ps - 3 ns
- Pulsspitzenleistung bis 4 MW
- Repetitionsrate: Einzelpuls bis 2 kHz (B) und 100 kHz (F)
- Hohe Strahlqualität
- Aktive Güteschaltung, geringer Jitter
- Luftkühlung
CO2 Laser 10600nm 100-120W
Artikelnummer des Herstellers:
100-120W CO2 Laser
Universal Laser Systems Inc
Beschreibung:
CO2 Laser 100/120 Watt - ULCR100-120.
Betrachten Sie unsere große Auswahl an Laser
Betrachten Sie unser Portfolio von Photonik
Betrachten Sie alle Produkte unseres Lieferanten Universal Laser Systems Inc
Eigenschaften:
- Luftgekühlt, dadurch keine Kondensationsprobleme oder zusätzliche Kosten für aufwendige Kühlung
- Dauerstrichlaser, modulierbar bis 5 kHz
- Durch die patentierte Free-Space Slab TechnologyTM ergibt sich ein kompakter Laser mit einem guten Strahlprofil im Nah- und Fernbereich, ohne zusätzliche Optiken
- Leichte Integration in bestehende Anlagen
- Als OEM-Version, oder Laserklasse 4-Version verfügbar
- NEU: Jetzt auch wassergekühlte Version erhältlich
Infrarot-Zielprojektoren
Artikelnummer des Herstellers:
14000Z Series
Santa Barbara Infrared
Beschreibung:
Infrarot-Testsysteme zur Charakterisierung von Infrarot-Kameras können aus
einer umfangreichen Liste von Einzelkomponenten individuell für den jeweiligen
Anwendungsfall konfiguriert werden:.
Betrachten Sie unsere große Auswahl an Homogene Lichtquellen und Kamera Testsysteme
Betrachten Sie unser Portfolio von Photonik
Betrachten Sie alle Produkte unseres Lieferanten Santa Barbara Infrared
Eigenschaften:
- Differentielle Schwarzkörperstrahler für den Temperaturbereich -40
- °C bis +125 C
- Motorisierte Targethalterungen mit zugehörigen emissiven oder reflektiven
- Targets
- Off-Axis-Kollimatoren im Newtonschen Aufbau mit Aperturen bis 12 und
- Brennweiten bis 60
- IR-Windows-Software zur Steuerung aller Systemkomponenten und Durchführung
- aller Standardtests wie SiTF, MRTD, MTF, etc.
Akustooptischer Hochleistungs-Modulator/-Deflektor, 9,4 µm oder 10,6 µm
Artikelnummer des Herstellers:
AOM740-H
Isomet
Beschreibung:
Mehrkanal-Modulator, zur Modulation sechs separater Strahlausgänge mit gleicher Leistung.
Betrachten Sie unsere große Auswahl an Laserstrahl Modulation
Betrachten Sie unser Portfolio von Photonik
Betrachten Sie alle Produkte unseres Lieferanten Isomet
Eigenschaften:
- Operating Wavelength range: 9.4µm, 10.6µm
- Crystal material: Germanium
- Clear aperture: 6x30mm, 7x30mm, 9x30mm
- Rise time: 830ns (Beam diameter dependent)
- Bragg angle: 38.6mrad@ Fc= 110MHz
ACT 9325
Artikelnummer des Herstellers:
9325
ACT
Beschreibung:
Supply voltage: 0.9, 1.2, 1.5, 1.8, 2.5, 3.3V, Freq. Stability: ±20 to ±100ppm, Temp. range: 0 ~ 70 to -40 ~ 85°C
Read our FAQs for frequency control.
Eigenschaften:
Small package AT cut, oscillator with good stability to ±20ppm.
ACTF0327/903,75-926,25/QCC8C
Artikelnummer des Herstellers:
F0327
ACT
Beschreibung:
Surface Mount QCC8C Ceramic Package Frequency Range: 903.75 MHz /926.25 MHz Applications : ISM / Mobile Communications Package : QCC8C Typical IL: 3.5 / 3.5 dB, Rejection: 35dB The ACTF03/27/903.75-926.25/TO39 is a low-loss, compact, and economical surface-acoustic-wave (SAW) filter in a low-profile metal TO-39 case. It is designed as an RF duplexer for cordless telephones (ISM). Centre frequency is 903.75 / 926.25 MHz.
Eigenschaften:
- High stability and reliability with good performance
- No matching network required for operation at 50 Ω
- Wide and sharp pass band characteristics
- Low insertion loss and deep stop band attenuation for interference
Series 942 Steuerungen für die Nutzung im industriellen Bereich - 942-M3A-2D-1G1-65E
Artikelnummer des Herstellers:
942-M3A-2D-1G1-65E
Honeywell - Sensors
Beschreibung:
The 942 separate series are industrial controls performing distance measurement by using an ultrasonic beam. They are the most versatile sensors of al the product range; they feature two analogue outputs (4 mA to 20 mA and 0 V to 10 V), Four switching outputs, parallel data outputs, and a serial link RS-232. The sensor head has no adjustment and may be mounted in the most remote or difficult places (top of tanks, inside of machinery, hot places.) The control box is mountable on DIN rail; it houses al the adjustments. Adjustment can be performed in a mater of seconds via the coding wheels and switches on the front panel of the control box. Advanced programming is done on a PC, connected with the RS-232 link. The software (under Microsoft Windows) provides a very easy man-machine interface with extended possibilities: Digital Signal Processing parameters, cycle time, slope, etc. 942-M3A kits includes control box, cable, connector and head; a programming kit including software and RS-232 cable may be purchased separately.
View our wide range of Position products
View our portfolio of Sensors
See all products from our supplier Honeywell - Sensors
Eigenschaften:
- Four models with scan ranges from 0.9 m to 3.0 m [2.95 ft to 9.84 ft]
- Stainless steel M30 heads, IP65
- Plastic control box with screw terminals, IP 40
- Synchronising/hold input: To avoid mutual interference from several sensors, they are very simply synchronised by connecting their synchronising/hold input (pin 4) together. If the measure needs to be stopped, connect the synchronising/hold input to the ground; the output stays stable.
- Ultrasonic beam power (sensitivity) adjustable by switch
- Four switching outputs, Open collector PNP: set points 1 and 2, adjustable by coded wheels ; Underange (target close), Overange (target far or absent).
- NO/NC adjustable by switch
- Two Analogue outputs (4 mA to 20 mA and 0 Vdc to 10 Vdc)
- Temperature compensation
Mechanischer Faseroptischer Doppel-Schalter (Latching Oder Non-Latching), 2x2
Artikelnummer des Herstellers:
2MS - 2x2
AC Photonics
Beschreibung:
AC Photonics MS Series Doppel 2x2 Schalter verbinden optische Kanäle durch Umleiten eines eingehenden optischen Signals in einer ausgewählten Ausgangsfaser. Dies wird erreicht durch eine zum Patent angemeldetes opto-mechanischen proprietären Konfiguration und aktiviert über ein elektrisches Steuersignal. Der Schalter bietet hohe Zuverlässigkeit und schnelle Schaltgeschwindigkeit sowie bi-direktionalen Betrieb. Die MS faseroptischen Schaltern sind echte Schalt-Lösung für optische Netzwerk-Anwendungen.
Betrachten Sie unsere große Auswahl an Passive
Betrachten Sie unser Portfolio von Faseroptische Komponenten
Betrachten Sie alle Produkte unseres Lieferanten AC Photonics
Eigenschaften:
- Kostengünstig
- Geringe Einfügeverluste
- Hohe Kanalisolation
- Hohe Stabilität und Zuverlässigkeit
- Epoxy-freier Optischer Pfad
- Latching oder Non-Latching
Mini-ITX Embedded Motherboard mit AMD G-Series APU
Artikelnummer des Herstellers:
H6813
Hectronic
Beschreibung:
The H6813 Mini-ITX motherboard is based on AMD Embedded G-series APUs. The APU is a combination of a parallel processing and graphics unit and a CPU. The architecture delivers increased graphics performance and is a benefit to applications requiring compute intensity by running tasks in parallel. The H6813 motherboard is targeting low power embedded applications such as Digital Signage, Information Kiosk, Point-of-Sale, Gaming and industrial control systems.
View our wide range of PCI / PCIe products
View our portfolio of Embedded computing products
See all products from our supplier Hectronic
Speedster22 i HD (HD1500) Geschwindigkeitsqualität 3, Temperaturbereich für gewerbliche Nutzung
Artikelnummer des Herstellers:
AC22IHD1500-F53C3
Achronix
Beschreibung:
Achronix delivers the world's most advanced highest density Field Programmable Gate Arrays (FPGAs), enabling new, innovative, and high-performance programmable designs. Speedster22i HD FPGAs are the only application targeted, high-end FPGAs and are half the power and half the cost of high-end, 28-nm FPGAs.
The Speedster22i HD FPGAs have a synchronous architecture and are built on Intel's advanced 22nm 3-D Tri-Gate transistor technology. Targeted for high bandwidth communication applications, they offer the combination of the highest density FPGAs with the lowest power consumption.
With familiar industry-standard tools and methodologies, designers are able to use Achronix™ FPGAs to create powerful high-performance systems. Achronix devices incorporate silicon-proven, embedded IP which simplifies the creation of high-speed applications.
View our wide range of Programmable Logic products
View our portfolio of Semiconductors
See all products from our supplier Achronix
Eigenschaften:
- Advanced highest‐density and highest‐bandwidth FPGA
- Over 1.7 million effective look‐up‐tables
- Abundant embedded hard IP for communications applications
- Fully reprogrammable, SRAM based
- Synchronous core and I/O
- Built on Intel's advanced 22‐nm 3‐D Tri‐Gate process technology
- Large capacity
- Up to 1.7 million effective look‐up‐tables
- Up to 138 Mb of Block RAM
- 80 Kb block RAMs running at 750 MHz
- 640 bit logic RAM (LRAM) running at 750 MHz
- Industry‐standard register transfer level (RTL) synthesis support:
- Synplify‐Pro from Synopsys
- Precision Synthesis from Mentor Graphics
- Rapid timing closure yielding significant time-to‐market advantages
- Embedded (Hard IP)
- 10/40/100 gigabit Ethernet MAC
- PCI Express Gen 1/2/3, x1, x4, x8 with DMA engine
- DDR 1/2/3 72 bits wide
- Interlaken
- Up to 64 channels of embedded 12.75 Gbps SerDes and 16 channels of embedded 28 Gbps SerDes supporting protocols including:
- PCI Express Gen 1/2/3
- 10/40/100 gigabit Ethernet (XFI, XAUI, XLAUI, CAUI)
- Interlaken
- Fibre Channel
- SATA/SAS
- OC48
- CEI‐6 SR/LR, CEI‐11 SR
- GPON/EPON
- CPRI/OBSAI
Speedster22 i HD (HD1500) Geschwindigkeitsqualität 3, Temperaturbereich für industrielle Nutzung
Artikelnummer des Herstellers:
AC22IHD1500-F53I3
Achronix
Beschreibung:
Achronix delivers the world's most advanced highest density Field Programmable Gate Arrays (FPGAs), enabling new, innovative, and high-performance programmable designs. Speedster22i HD FPGAs are the only application targeted, high-end FPGAs and are half the power and half the cost of high-end, 28-nm FPGAs.
The Speedster22i HD FPGAs have a synchronous architecture and are built on Intel's advanced 22nm 3-D Tri-Gate transistor technology. Targeted for high bandwidth communication applications, they offer the combination of the highest density FPGAs with the lowest power consumption.
With familiar industry-standard tools and methodologies, designers are able to use Achronix™ FPGAs to create powerful high-performance systems. Achronix devices incorporate silicon-proven, embedded IP which simplifies the creation of high-speed applications.
View our wide range of Programmable Logic products
View our portfolio of Semiconductors
See all products from our supplier Achronix
Eigenschaften:
- Advanced highest‐density and highest‐bandwidth FPGA
- Over 1.7 million effective look‐up‐tables
- Abundant embedded hard IP for communications applications
- Fully reprogrammable, SRAM based
- Synchronous core and I/O
- Built on Intel's advanced 22‐nm 3‐D Tri‐Gate process technology
- Large capacity
- Up to 1.7 million effective look‐up‐tables
- Up to 138 Mb of Block RAM
- 80 Kb block RAMs running at 750 MHz
- 640 bit logic RAM (LRAM) running at 750 MHz
- Industry‐standard register transfer level (RTL) synthesis support:
- Synplify‐Pro from Synopsys
- Precision Synthesis from Mentor Graphics
- Rapid timing closure yielding significant time-to‐market advantages
- Embedded (Hard IP)
- 10/40/100 gigabit Ethernet MAC
- PCI Express Gen 1/2/3, x1, x4, x8 with DMA engine
- DDR 1/2/3 72 bits wide
- Interlaken
- Up to 64 channels of embedded 12.75 Gbps SerDes and 16 channels of embedded 28 Gbps SerDes supporting protocols including:
- PCI Express Gen 1/2/3
- 10/40/100 gigabit Ethernet (XFI, XAUI, XLAUI, CAUI)
- Interlaken
- Fibre Channel
- SATA/SAS
- OC48
- CEI‐6 SR/LR, CEI‐11 SR
- GPON/EPON
- CPRI/OBSAI
Speedster22 i HD (HD680) Geschwindigkeitsqualität 2, Temperaturbereich für industrielle Nutzung
Artikelnummer des Herstellers:
AC22IHD680-F53I2
Achronix
Beschreibung:
Achronix delivers the world's most advanced highest density Field Programmable Gate Arrays (FPGAs), enabling new, innovative, and high-performance programmable designs. Speedster22i HD FPGAs are the only application targeted, high-end FPGAs and are half the power and half the cost of high-end, 28-nm FPGAs.
The Speedster22i HD FPGAs have a synchronous architecture and are built on Intel's advanced 22nm 3-D Tri-Gate transistor technology. Targeted for high bandwidth communication applications, they offer the combination of the highest density FPGAs with the lowest power consumption.
With familiar industry-standard tools and methodologies, designers are able to use Achronix™ FPGAs to create powerful high-performance systems. Achronix devices incorporate silicon-proven, embedded IP which simplifies the creation of high-speed applications.
View our wide range of Programmable Logic products
View our portfolio of Semiconductors
See all products from our supplier Achronix
Eigenschaften:
- Advanced highest‐density and highest‐bandwidth FPGA
- Over 1.7 million effective look‐up‐tables
- Abundant embedded hard IP for communications applications
- Fully reprogrammable, SRAM based
- Synchronous core and I/O
- Built on Intel's advanced 22‐nm 3‐D Tri‐Gate process technology
- Large capacity
- Up to 1.7 million effective look‐up‐tables
- Up to 138 Mb of Block RAM
- 80 Kb block RAMs running at 750 MHz
- 640 bit logic RAM (LRAM) running at 750 MHz
- Industry‐standard register transfer level (RTL) synthesis support:
- Synplify‐Pro from Synopsys
- Precision Synthesis from Mentor Graphics
- Rapid timing closure yielding significant time-to‐market advantages
- Embedded (Hard IP)
- 10/40/100 gigabit Ethernet MAC
- PCI Express Gen 1/2/3, x1, x4, x8 with DMA engine
- DDR 1/2/3 72 bits wide
- Interlaken
- Up to 64 channels of embedded 12.75 Gbps SerDes and 16 channels of embedded 28 Gbps SerDes supporting protocols including:
- PCI Express Gen 1/2/3
- 10/40/100 gigabit Ethernet (XFI, XAUI, XLAUI, CAUI)
- Interlaken
- Fibre Channel
- SATA/SAS
- OC48
- CEI‐6 SR/LR, CEI‐11 SR
- GPON/EPON
- CPRI/OBSAI
915 MHz LC Tiefpassfilter
Artikelnummer des Herstellers:
LP915SBP
Sangshin
Beschreibung:
View our wide range of Filter products
View our portfolio of RF components
See all products from our supplier Sangshin
120 W LED-Netzteil
Artikelnummer des Herstellers:
LXC120-4200SW
Excelsys Technologies
Beschreibung:
The LXC120 series of constant current LED power supplies from Excelsys Technologies can deliver up to 120W of output power in an extremely compact package size.
The LXC120 series of constant current power supplies provides up to 4900mA of output current and 343V output voltage solutions for specific LED requirements. With industry leading efficiencies, and an extensive protection feature set, the LXC120 series provides high reliability and high performance in a compact package.
View our wide range of LED power supplies
View our portfolio of AC/DC products
See all products from our supplier Excelsys Technologies
Eigenschaften:
- High Efficiency (up to 92%)
- Constant Output Current
- Active PFC (Typical 0.99)
- IP67 Waterproof
- OVP, SCP
- -35 to 70°C deg operation
- Universal Input 90-305VAC
- UL8750 compliant
- EN61347-1, -2-13 compliant
Hybrid-Koppler 3 dB, 180°
Artikelnummer des Herstellers:
30056
Anaren
Beschreibung:
The Anaren Model 30056 is a military grade, cased, 3dB, 180 degree hybrid coupler designed to operate over a frequency range of 2 to 4GHz, with a power handling capability of upto 100Watts. Housed in a ruggedesied aluminium package measuring just 41.91 x 41.148 mm, the 30056 has stainless steel connectors and meets MIL-E-5400 Class 3 requirements.
View our wide range of Coupler / Divider products
View our portfolio of RF components
See all products from our supplier Anaren
Eigenschaften:
- Military Grade
- 2.0 - 4.0 GHz
- 2-Way power Split
- 180 Degree
- Stainless Steel Connectors
- Rugged Aluminum Housing
- Low VSWR
- Meets MIL-E-5400 Class 3 Requirements
Ebene ER-Kerne - Kernsets für allgemeine Transformatoren
Artikelnummer des Herstellers:
ER14.5/3/7-3C96
Ferroxcube
Beschreibung:
Ferroxcube's ER14.5/3/7-3C96 is a size 14.5/3/7 Planar ER core manufactured from 3C96 grade material.
Material type 3C96 is a low to medium frequency power material for use in power and general purpose transformers at frequencies up to 0.4 MHz.
View our wide range of Cores
View our portfolio of Magnetic components
See all products from our supplier Ferroxcube
PM-Kerne - Kernsets für allgemeine Transformatoren- und Leistungsanwendungen
Artikelnummer des Herstellers:
PM74/59-3C90
Ferroxcube
Beschreibung:
Ferroxcube's PM74/59-3C90 is a size 74/59 PM core manufactured from 3C90 grade material.
Material type 3C90 is a low frequency power material for use in power and general purpose transformers at frequencies up to 0.2 MHz.
View our wide range of Cores
View our portfolio of Magnetic components
See all products from our supplier Ferroxcube
3,56 mm Runder optischer Lichtleiter, 4er Array
Artikelnummer des Herstellers:
5151048F
Dialight
Beschreibung:
This Optopipe's™ circular light emitting surfaces appear bright and uniform in intensity. It is securely held in place by 2 snap-fit pins and 1 locating pin located between the 4 light pipe elements. This Optopipe™ functions as a through-the case indicator with a textured finish on the 4 light emitting surface that increases its viewing angle. The recommended light sources are Dialight's 597 Series 1206 Type SMT LEDs. The LEDs are mounted in a straight line on a 0.250' pitch.
The light pipe material is water clear transmissive polycarbonate rated UL94-V0, and has a 35% oxygen index.
View our wide range of Circuit Board products
View our portfolio of LEDs and Lighting products
See all products from our supplier Dialight
Eigenschaften:
- Snap Pin retention version of Dialight's 515-1020 4 Array Light Pipe
- High transmissivity polycarbonate material
- UL94V-0 compliance
- ESD protection (circuit isolation from front panel)
- Wide viewing angle
- Arrays reduce insertion costs
- Secures to PCB by snap-fit
3 mm Prism® CBI® SMT-Leiterplatten-LED-Anzeige, Zweistufig
Artikelnummer des Herstellers:
592-2023-013F
Dialight
Beschreibung:
Dialight's Prism indicators are the industry's only SMD indicator series designed to survive 260°C peak reflow temperature AND provide the aesthetic appeal of a diffused lens for enhanced viewing. Ideal for limited-space applications and board-edge mounting, the Prism Series is available in a variety of package sizes including single level, bi-level, and tri-level configuration and in 2mm and 3mm lens size. The integral light pipes used in Prism are engineered for maximum light transmission and minimal light bleed while the diffused lens is also ideal for bi-colour and tri-colour applications where colour-mixing is desired.
View our wide range of Circuit Board products
View our portfolio of LEDs and Lighting products
See all products from our supplier Dialight
Eigenschaften:
- Compatible with automatic pick-and-place equipment for reduced installation costs
- RoHS Compliant
- Available with 2mA low current LED
- Eliminates wave soldering process
- Black, low-profile PPA housing enhances the contrast ratio for better clarity
Eisenpulver Ringkern für Leistungsanwendungen
Artikelnummer des Herstellers:
T520-8/90
Micrometals
Beschreibung:
The T520-8/90 Toroidal core from Micrometals is a size Toroidal core manufactured from Micrometal's unique blend 8/90 material. and can be clearly identified by the cores' Yellow/Red colour.
View our wide range of Cores
View our portfolio of Magnetic components
See all products from our supplier Micrometals
Leistungsstarker Mikrowellen-GaAs-FET
Artikelnummer des Herstellers:
TIM1414-18L
Toshiba - RF
Beschreibung:
The TIM1414-18L Microwave Power GaAs FET Amplifier from Toshiba has been optimised for broadband applications over the 14 to 14.5GHz frequency range. Featuring Low intermodulation distortion, high power (P1db=42.5dBm) and high gain (6dB) the TIM1414-18L has a maximum junction temperature of 175OC.
View our wide range of Transistor products
View our portfolio of RF components
See all products from our supplier Toshiba - RF
Eigenschaften:
- High Power (P1dB = 37.5 dBm at 9.5 GHz to 10.5 GHz)
- High Gain (G1dB = 7 dB at 9.5 GHz to 10.5 GHz)
- Broad Band Internally Matched FET
- Hermetically Sealed Package
Leistungsstarker Mikrowellen-GaAs-FET
Artikelnummer des Herstellers:
TIM0910-15L
Toshiba - RF
Beschreibung:
The TIM0910-15L Microwave Power GaAs FET Amplifier from Toshiba has been optimised for broadband applications over the 9.5 to 10.5GHz frequency range. Featuring high power (P1db=42dBm) and high gain (7dB) the TIM0910-15L has a maximum junction temperature of 175OC.
View our wide range of Transistor products
View our portfolio of RF components
See all products from our supplier Toshiba - RF
Eigenschaften:
- High Power (P1dB = 42 dBm at 9.5 GHz to 10.5 GHz)
- High Gain (G1dB = 7 dB at 9.5 GHz to 10.5 GHz)
- Broad Band Internally Matched FET
- Hermetically Sealed Package
1000 nH Chip-Induktor - Optimiert für Signalfilterung
Artikelnummer des Herstellers:
IC0603A102R-10
Laird - Magnetic Ceramic Products
Beschreibung:
Laird Technologies, IC family of two-terminal surface mount chip inductors provide a cost effective solution for densely packed PC board designs for general purpose applications.
The IC0603A102R-10 has an inductance of 1000nH and a maximum rated current of 0.025A.
View our wide range of Inductors
View our portfolio of Magnetic components
See all products from our supplier Laird - Magnetic Ceramic Products
Eigenschaften:
- Small footprint
- Economical
- Rugged construction
- Lead Free
2.5 psi (17 kPa), Relativdrucksensor, No Ports, 10V Konstantspannungsversorgung
Artikelnummer des Herstellers:
NPI-19-A-002-G-V
Amphenol Advanced Sensors
Beschreibung:
NPI media isolated sensors are designed to operate in hostile environments and yet give the outstanding sensitivity linearity and hysteresis of a silicon sensor. The piezoresistive sensor chip is housed in a fluid-filled cylindrical cavity and isolated from measured media by a stainless steel diaphragm and body. The NPI Series employs SenStable processing technology providing excellent output stability. Available in either constant current or constant voltage version.
The modular design allows for a variety of pressure port modules which are hermetically welded to the sensor header module. There are other standard port styles available.
View our wide range of Pressure products
View our portfolio of Sensors
See all products from our supplier Amphenol Advanced Sensors
Eigenschaften:
- Solid state, high reliability
- 316L stainless steel, ISO sensor design
- ±0.5% static accuracy
- Temperature compensated 32°F to 158°F (0°C to 70°C)
- 125 mV typical FSO on current version
- 75 ±1 mV FSO on voltage version
- Thermal errors less than 2% FSO
- Two standard ranges: 0 to 2.5 psig (0 to 1 bar), 0 to 5 psig (0 to 17.24 bar)
- Standard configurations include:
- 0.74 in (19 mm) diameter x 0.28 in (7.1 mm) long cylinder with o-ring seals
- Custom configurations and other pressure ranges available.
700-1000 MHz Einzelner Down-Converter Mischer mit hohem Verstärkungsfaktor und hoher Linearität
Artikelnummer des Herstellers:
SKY73070
Skyworks
Beschreibung:
The SKY73070 is a fully integrated single mixer that includes an LO driver, high linearity mixer, and a large dynamic range IF amplifier. A low loss RF balun has also been included to reduce design complications and lower system cost.
View our wide range of Mixer / Demod / Modulator products
View our portfolio of RF components
See all products from our supplier Skyworks
Eigenschaften:
- IF frequency range: 40 to 300 MHz
- Integrated LO driver
- Integrated low loss RF balun
- High linearity IF amplifier Output IP3: +36.5 dBm
Oxymac50 Sauerstoffsensor Schnittstellenkarte
Artikelnummer des Herstellers:
OXYMAC50
Honeywell - Sensors
Beschreibung:
The Oxymac, sensor interface board is a control and measurement device for Honeywell's range of dynamic, highly accurate oxygen sensors. The ability of these sensors to operate without any reference gas makes them often ideal for many applications, including combustion and environmental control.
Honeywell oxygen sensors using zirconia-based sensing elements require external connection to an electronic measuring circuit to control sensor operation and signal processing. A heating element on the sensor produces the 700 °C required for the ZrO₂ to achieve its operational temperature. These interface boards supply the sensor with the necessary circuits to provide this control and processing, while also providing sensor calibration. The Oxymac50 requires an external heater power supply. For applications where an external heater supply is not feasible, then Honeywell's DE800 interface should be considered.
View our wide range of Gas sensing products
View our portfolio of Sensors
See all products from our supplier Honeywell - Sensors
Eigenschaften:
- Provides the necessary circuits to control Honeywell oxygen sensors
- Functional testing and calibration in ambient air
- PCB board format
- Linear output of measured oxygen content in voltage or current format
- Low power consumption
GS -3,0 GHz Digitales sechs-Bit-Dämpfungsglied mit seriellem oder parallelem Treiber
Artikelnummer des Herstellers:
SKY12347-362LF
Skyworks
Beschreibung:
The SKY12347-362LF is a GaAs pHEMT six-bit broadband digital attenuator with a 0.5 dB Least Significant Bit (LSB). A Transistor-to-Transistor Logic (TTL)/CMOS-compatible, dual-mode serial or parallel interface controller is integrated into the device.
View our wide range of Attenuator products
View our portfolio of RF components
See all products from our supplier Skyworks
Eigenschaften:
- Broadband operation: DC to 3.0 GHz
- Attenuation: 31.5 dB with 0.5 dB LSB
- TTL/CMOS-compatible serial, parallel, or latched parallel control interface
- Single supply voltage: +3.3 or +5 V
- Small, QFN (24-pin, 4 x 4 mm) package (MSL1, 260 °C per JEDEC J-STD-020)
Thermometrics IR-Sensor
Artikelnummer des Herstellers:
ZTP-135SR
Amphenol Advanced Sensors
Beschreibung:
This thermopile sensor is used for non-contact surface temperature measuring. The ZTP-135SR model consists of thermo-elements, flat IR filter, a thermistor for temperature compensation in a hermetically-sealed TO-41 package. There is also a variety of filters available to help maximize performance in specific applications.
View our wide range of Temperature products
View our portfolio of Sensors
See all products from our supplier Amphenol Advanced Sensors
Eigenschaften:
- Small-size sensor (TO-41 package)
- Included ambient temperature (thermistor) sensor for compensation
- High sensitivity
- Fast response time
- Low cost
Präzisionsgyroskop für Navigation und Ausrichtung
Artikelnummer des Herstellers:
CRM200
Silicon Sensing
Beschreibung:
PinPoint® is a single-axis MEMS angular rate sensor (gyro) capable of measuring angular velocity up to a maximum of ±1,000º/s which has two output modes; an analogue voltage signal which is linearly proportional to angular speed, and a digital signal in SPI® protocol. The choice of output mode; analogue or digital, is determined by the user when connecting it to the user's host PCBA.
PinPoint® is available in several configurations; a) CRM100 which measures angular velocity about an axis perpendicular to the plane of the host PCBA, referred to as 'in-plane' sensing, b) CRM200 which measures angular velocity about an axis which is parallel to the plane of the host PCBA, referred to as 'orthogonal' sensing c) CRM120 which measures angular velocity about an axis 20º off the perpendicular for applications where the host PCBA is a 20º an inclined angle. This datasheet relates to part number CRM100.
With a combination of CRM100 and CRM200 it is possible for the user to measure angular rate of multiple axes (e.g. any combination of pitch, yaw and roll) from a single host PCBA.
PinPoint® is supplied as a PCBA surface mountable LCC ceramic packaged device. It comprises five main components; silicon MEMS ring Sensor, Pedestal, ASIC, Package Base and Lid.
There are eight actuators / transducers distributed evenly around the perimeter of the silicon MEMS ring. Located about its primary axes are a single pair of 'primary drive' actuators and a single pair of 'primary pick-off' transducers. Located about its secondary axes (at 45° to the primary) are two pairs of 'secondary pick-off' transducers.
The 'primary drive' actuators and 'primary pick-off' transducers act together in a closed-loop system to excite and control the ring primary operating vibration amplitude and frequency.
Secondary 'pick-off' transducers detect radial movement at the secondary axes, the magnitude of which is proportional to the angular speed of rotation and from which the gyro derives angular rate.
View our wide range of Gyroscopes / Angular rate products
View our portfolio of Sensors
See all products from our supplier Silicon Sensing
Eigenschaften:
- Small (6.3 x 5.5 x 2.7mm)
- Proven and robust silicon MEMS vibrating ring gyro
- Low bias instability (24º/hr) over short integration period (<1s)
- Low Angular Random Walk (0.28º/hr)
- In-plane, orthogonal and 20º inclined sensing options (CRM100, CRM200 and CRM120)
- User selectable dynamic ranges; 75º/s, 150º/s, 300º/s and 900º/s (maximum 1,000º/s)
- Analogue and Digital ( SPI® ) output modes
- User adjustable bandwidth to 160Hz
- 3V supply
- Low power consumption (4mA)
- High shock and vibration rejection
- Hermetically sealed ceramic LCC surface mount package for temperature and humidity resistance
- Integral temperature sensor
- Low integration cost
- Design tools and resources available
- RoHS compliant
- AEC Q100 tested
Extrem kleiner Zweiachsen-Magnetsensor mit I2C-Schnittstelle
Artikelnummer des Herstellers:
MMC2260MT
Memsic
Beschreibung:
The MMC226xMT is a 2-axis magnetic sensor, it is a complete sensing system with on-chip signal processing and integrated I2C bus, allowing the device to be connected directly to a microprocessor eliminating the need for A/D converters or timing resources. It can measure magnetic field with a full range of ±6 gausses.
The MMC226xMT is packaged in an ultra small low profile LGA package (2.0 x 2.0 x 1.0 mm) and is available in operating temperature ranges of -40°C to +85°C.
The MMC226xMT provides an I2C digital output with 400 KHz, fast mode operation.
View our wide range of Magnetic products
View our portfolio of Sensors
See all products from our supplier Memsic
Eigenschaften:
- Full integration of 2-axis magnetic sensors and electronics circuits resulting in less external components needed
- 14bits output resolution
- Small Low profile package 2.0x2.0x1.0mm
- Low power consumption
- Power up/down function available through I2C interface
- With continuous operation mode, frequency selectable
- I2C Slave, FAST (≤400 KHz) mode
- 1.8V compatible IO
- 1.62V~3.6V wide power supply operation supported, 1.8V typical operation.
- RoHS compliant
Optisches Modul, Serielle Daten, Lötbar
Artikelnummer des Herstellers:
CT-0155NTR-Sx2y-A
Coretek
Beschreibung:
1x9 PTH, 155Mb/s, 2km, Multimode, LWL-Duplex, 850nm, VCSEL, -40 to 85°C, RoHS.
Betrachten Sie unsere große Auswahl an Transceivers
Betrachten Sie unser Portfolio von Faseroptische Komponenten
Betrachten Sie alle Produkte unseres Lieferanten Coretek
Eigenschaften:
- Industry Standard 1x9 Pin Through Hole (PTH) Footprint
- +3.3V or +5V Power Supply
- PECL Differential Electrical Interface
- PECL or TTL Signal Detect
- Duplex SC or ST Connectors
- Class 1 Laser Product 21CFR1040.10
- RoHS Compliant
100 psi (700 kPa), Absolutdrucksensor, Analogausgang, Ported, IC Tubes or Tape and Reel
Artikelnummer des Herstellers:
NPP-301B-700A/AT
Amphenol Advanced Sensors
Beschreibung:
The NPP-301 Series features silicon pressure sensors in surface mount packages. An ultra-small Silicon Fusion Bonded (SFB), ultra-high stability SenStable® piezoresistive chip from NovaSensor is placed in a plastic package that exploits high volume, lead-frame package technology to bring forth a low-cost sensor alternative to the OEM user.
The NPP-301 Series produces a voltage output that is linearly proportional to the input pressure. The user can provide NPP Series products with signal conditioning circuitry to amplify the output signal or to maximize OEM value added. The NPP-301 Series is compatible with most non-corrosive gases and dry air.
View our wide range of Pressure products
View our portfolio of Sensors
See all products from our supplier Amphenol Advanced Sensors
Eigenschaften:
- Low-cost surface mount package: SO-8
- Wide operating temperature range: -40°F to 257°F (-40°C to 125°C)
- Static accuracy <0.20% FSO maximum
- Suitable for automated component assembly
- Four element Wheatstone bridge configuration for circuit design flexibility
- Solid-state reliability
- 100, 200 and 700 kPa absolute pressure ranges available
180 Watt Single Ausgang AC/DC Schaltnetzteil für medizinische und industrielle Geräte
Artikelnummer des Herstellers:
MINT1180A1275K01
SL Power Electronics
Beschreibung:
3' x 5' x 1.3' Package, Up to 180 W of AC-DC Power, Convection Cooled, Universal Input 90-264 Vac, Meets Class B EMI, Conducted and Radiated, Fits 1U Applications, Approved to EN/CSA/UL/IEC60601-1, 3rd Edition, Approved to EN/CSA/UL/IEC60950-1, 2nd Edition, Efficiency up to 90%, CE Compliant (LVD, RoHS), Optional Chassis/Cover.
View our wide range of AC/DC products
View our portfolio of Power supplies
See all products from our supplier SL Power Electronics
Eigenschaften:
- 3 inch x 5 inch x 1.3 inch Package
- Up to 180 W of AC-DC Power
- Convection Cooled
- Universal Input 90-264 Vac
- Meets Class B EMI, Conducted & Radiated
- Fits 1U Applications
- Approved to EN/CSA/UL/IEC60601-1, 3rd Edition
- Approved to EN/CSA/UL/IEC60950-1, 2nd Edition
- Efficiency up to 90%
- CE Compliant (LVD, RoHS)
- Optional Chassis/Cover
Leaded Ceramic Chip Carrier
Artikelnummer des Herstellers:
CA-196-0.635-03
Enplas
Beschreibung:
The CA-196-0.635-03 from Enplas is a 196 way carrier for LDCC packages, for use with the mating socket in test and burn-in, or for stand alone package protection and transportation
View our wide range of Socket and Card products
View our portfolio of Connectors / Cables
See all products from our supplier Enplas
Eigenschaften:
- Designed for maximum device lead protection.
- Live and dead bug available.
MQFP-Klappgehäuse
Artikelnummer des Herstellers:
FPQ-64-0.8-13
Enplas
Beschreibung:
The FPQ-64-0.8-13 from Enplas is a 64 way Clamshell socket for MQFP, for use in test and burn-in.
View our wide range of Socket and Card products
View our portfolio of Connectors / Cables
See all products from our supplier Enplas
SOP-Klappgehäuse
Artikelnummer des Herstellers:
FP-32-1.0-02
Enplas
Beschreibung:
The FP-32-1.0-02 from Enplas is a 32 way Clamshell socket for SOP, for use in test and burn-in.
View our wide range of Socket and Card products
View our portfolio of Connectors / Cables
See all products from our supplier Enplas
Eigenschaften:
- Floating base design simplifies device loading and positioning while providing superior lead protection.
- RoHS compliant
AC/DC-Netzteil, open frame, 60 W, 5 V, Medizin
Artikelnummer des Herstellers:
CFM60M050
Cincon
Beschreibung:
The CFM60M050 from Cincon is a single output, switch-mode AC/DC open frame power supply designed for applications within the Medical market. Suitable for use around the world the CFM60M050 has an input voltage range of 90 to 264Volts AC, an output voltage of 5V, a peak efficiency of 82% and a maximum output power of 60Watts.
View our wide range of AC/DC products
View our portfolio of Power supplies
See all products from our supplier Cincon
Eigenschaften:
- Universal Input Range 90-264VAC
- Efficiency to 90%
- Continuous Short Circuit Protection
- Meets EN60601-1 and EN55011 Class B
- No load Power Consumption<0.5W
- 2 inch x 4 inch Size
Horizontalhalterung für große Ringkerne
Artikelnummer des Herstellers:
TCM230-04
Lodestone Pacific
Beschreibung:
The TCM230-04 from Lodestone Pacific is a Horizontal Mount for Large Toroids
View our wide range of Accessories
View our portfolio of Magnetic components
See all products from our supplier Lodestone Pacific
Explosionsgeschützter Grenzschalter mit Rollenstößel oben, 6-m-Kabel
Artikelnummer des Herstellers:
14CE102-6
Honeywell - HMI
Beschreibung:
Designed for explosive environments. MICRO SWITCH™ 14CE Series has been approved to meet the requirements of the Low Voltage directive and is CE marked.
View our wide range of Limit products
View our portfolio of Switches
See all products from our supplier Honeywell - HMI
Eigenschaften:
- Compact construction
- IP65/66/67
- Pre-wired or connector versions
- Die-cast Zinc housing
- Wide selection of actuators
- Gang mounting capability
- Cable length variations
- Side and bottom exit cable/connector
- Simple two-screw mounting
- Low temperature variants
- Fluorocarbon sealing (standard)
Subminiatur-Basisschalter
Artikelnummer des Herstellers:
ZX40E10C01
Honeywell - HMI
Beschreibung:
MICRO SWITCH™ ZX Series subminiature basic switches are used for simple or precision ON/OFF application needs. These switches combine small size and light weight with ample electrical capacity, low cost and long life.
View our wide range of Microswitches
View our portfolio of Switches
See all products from our supplier Honeywell - HMI
Eigenschaften:
- Subminiature: 6,5 mm H x 5,7 mm W x 12,7 mm L [0.26 in H x 0.22 in W x 0.50 in L]
- Choice of low energy or power duty electrical ratings (gold-plated or silver contacts)
- Single pole double throw (SPDT) circuitry or single pole single throw (SPST) circuitry available
- Choice of 0.1 A or 3 A ratings
- Choice of actuation, termination and operating characteristics
- Polybutylene terephthalate housing material
Kippschalter, 4-polig, 3 Positionen
Artikelnummer des Herstellers:
4TL1-50N
Honeywell - HMI
Beschreibung:
MICRO SWITCH™TL Series toggle switches have high strength, temperature resistant, non-tracking case material and silver cadmium oxide contacts. Pull-to-Unlock toggle levers prevent accidental operation; the lever must be pulled approx. 2,3 mm (0.09 inches) to change positions.
View our wide range of Toggle products
View our portfolio of Switches
See all products from our supplier Honeywell - HMI
Eigenschaften:
- Qualified to MIL-DTL-3950
- Environment-proof sealing
- 4 pole circuitry
- Standard and pull-to-unlock levers
- 3 position, maintained and momentary toggle action
- Temperature range: -85°F to +160°F
- Completely sealed switching chamber
- Step-design case provides added space between terminals to help prevent shorting
- UL recognized, CSA certified
- CE approved
Optisches Modul, Serielle Daten, Hot-Swap
Artikelnummer des Herstellers:
CT-A000NPP-SB1L-E
Coretek
Beschreibung:
SFP+, 11.3Gb/s, 300m, Multimode, LWL-Duplex, 850nm, VCSEL, -40 to 85°C, RoHS.
Betrachten Sie unsere große Auswahl an Transceivers
Betrachten Sie unser Portfolio von Faseroptische Komponenten
Betrachten Sie alle Produkte unseres Lieferanten Coretek
Eigenschaften:
- Industry Standard Small Form-factor Pluggable (SFP+) Footprint
- Compliant to Multiple Supplier Agreement (MSA) SFF-8431 and SFF-8432
- Digital Diagnostic Monitoring Interface (DDMI) Compliant to SFF-8472
- +3.3V Power Supply
- PECL Differential Electrical Interface
- TTL Signal Detect
- Duplex LC Connectors
- Class 1 Laser Product 21CFR1040.10
- RoHS Compliant
Präzisionsdruckwandler
Artikelnummer des Herstellers:
PPT0001DFF2VA-EF
Honeywell - Magnetic
Beschreibung:
Honeywell's precision pressure transducer (PPT) offers extraordinary value with high accuracy over a wide temperature range. The PPT combines proven silicon sensor technology with microprocessor-based signal conditioning to provide an extremely smart pressure transducer. Available in a compact, rugged design, the PPT has many software features that support a wide range of applications.
View our wide range of Pressure products
View our portfolio of Sensors
See all products from our supplier Honeywell - Magnetic
Eigenschaften:
- High Accuracy ±0.05% FS typical accuracy from -40 to 85°C
- Smart, Digital Sensing and Control
- Versatile and Configurable
- User Selectable Software Features
HF SAW-Bandpassfilter mit 1575,42MHz Mittenfrequenz, 2MHz Durchlassband
Artikelnummer des Herstellers:
TA0757A
Tai-Saw Technology (TST)
Beschreibung:
The TA0757A RF SAW Filter from TST (Tai-Saw Technology) is designed for use in GPS systems. The device has a centre frequency of 1575.42MHz with a pass band of 2 MHz and maximum insertion loss of 1.5dBm in a 1.4 x 1.1 x 0.7 mm package.
View our wide range of Filter products
View our portfolio of RF components
See all products from our supplier TST (Tai-Saw Technology)
2,0-3,0 GHz Hohe Linearität, Rauscharmer Verstärker mit aktiver Vorspannung
Artikelnummer des Herstellers:
SKY67003-396LF
Skyworks
Beschreibung:
The SKY67003-396LF is GaAs, pHEMT Low-Noise Amplifier (LNA) with an active bias and high linearity performance. The advanced GaAs pHEMT enhancement mode process provides good return loss, low noise, and high linearity performance.
View our wide range of Amplifier products
View our portfolio of RF components
See all products from our supplier Skyworks
Eigenschaften:
- Extended operating temperature range: -40 °C to +100 °C
- Low Noise Figure: 0.89 dB @ 2.6 GHz
- Excellent IIP3 performance: +21.5 dBm @ 2.6 GHz
- Gain: 17.5 dB @ 2.6 GHz
- Adjustable supply current
- Integrated enable circuitry
- Temperature and process-stable active bias
- Miniature DFN (8-pin, 2 x 2 mm) package (MSL1 @ 260 °C per JEDEC J-STD-020)
Leistungsteiler 2-Wege
Artikelnummer des Herstellers:
41130
Anaren
Beschreibung:
The Anaren Model 41130 is a 2-way power divider designed to operate over the frequency range 2 to 18GHz with a power handling capability of 10Watts. Measuring 36.83 x 76.2mm the Model 41130 meets the requirements of MIL-E-5400 Class 3.
View our wide range of Coupler / Divider products
View our portfolio of RF components
See all products from our supplier Anaren
Eigenschaften:
- Military Grade
- 2.0 - 18.0 GHz
- 2-Way Power Split
- In-Phase
- Connectors Per MIL-C-39012
- Rugged Aluminium Housing
- Low VSWR
- Meets MIL-E-5400 Class 3 Requirements
MPP Ringkern 200 PERM 4,65 mm AD
Artikelnummer des Herstellers:
0055177AY
Magnetics Inc
Beschreibung:
The 0055177AY is a Toroid core manufactured using MPP material. Magnetics Molypermalloy Powder (MPP) cores are distributed air gap cores made from a 79% Nickel, 17% Iron, and 4% Molybdenum alloy powder for the lowest core losses of any powder core material. MPP cores possess many outstanding magnetic characteristics, such as high resistivity, low hysteresis and eddy current losses, excellent inductance stability after high DC magnetization or under high DC bias conditions and minimal inductance shift up to 2000 gauss under AC conditions. Applications for MPP cores include; Flyback Transformers, Buck/Boost and Power Factor Correction (PFC), Inductors, In-Line Noise Filters, High Q Filters, and Resonant Circuits.
The dimensions are ID min 2.03mm, OD max 5.11mm, HT max 3mm.
The short part number is 55177-AY
View our wide range of Cores
View our portfolio of Magnetic components
See all products from our supplier Magnetics Inc
Eigenschaften:
- Lowest core loss of all powder core materials offered by Magnetics
- Very high Curie temperature
- Small shift in permeability with temperature
- Small shift in saturation with temperature
- Reversibility of temperature effects
- Resistance to thermal shock
- Resistance to mechanical shock and strain
- Temperature stabilization for special applications
PC Spule - 12 Pin, 1 Abschnitt
Artikelnummer des Herstellers:
PCB3723L1
Magnetics Inc
Beschreibung:
The PCB3723L1 from Magnetics Inc. is a single section bobbin for 43723 RM ferrite cores
View our wide range of Accessories
View our portfolio of Magnetic components
See all products from our supplier Magnetics Inc
Drahtwicklung, Toroid, Vertikalhalterung Induktor
Artikelnummer des Herstellers:
030KM7502VSMLF
Gowanda
Beschreibung:
The 030KM7502VSMLF is a Wirewound, Toroidal, Vertical Mount Inductor from Gowanda Electronics Inc. with an inductance of 0.075µH, a rated DC current of 0.00162A and a DC resistance of 0.125Ω. Gowanda Electronics, established for over 40 years, specialises in providing high performance inductors for demanding applications in the industrial, communications, military/aerospace, medical, and power conversion industries.
View our wide range of Inductors
View our portfolio of Magnetic components
See all products from our supplier Gowanda
3,0-3,8 GHz, 20 dB Variables Dämpfungsglied
Artikelnummer des Herstellers:
SKY12146-321LF
Skyworks
Beschreibung:
The SKY12146-321LF is a GaAs pHEMT variable voltage attenuator designed for WLAN and WiMAX applications. The device operates within 3.2 to 3.8 GHz and is ideal for low-cost applications such as 3.5 GHz fixed wireless LANs and WiMAX power control systems.
View our wide range of Attenuator products
View our portfolio of RF components
See all products from our supplier Skyworks
Eigenschaften:
- Power control for 3.5 GHz fixed wireless applications
- Typical attenuation: 20 dB
- Control voltage: 0-1.4 V
- Low cost
- No external components needed
- Small, QFN (12-pin, 3 x 3 mm) package (MSL1, 260 °C per JEDEC J-STD-020)
EN3 Serie Kabelendverschluss wetterfeste Steckverbinder
Artikelnummer des Herstellers:
EN3C2FX
Switchcraft Inc
Beschreibung:
Utilizing an integral O-Ring/gasket, EN3 connectors are available in 2-18 pins/sockets in the same housing size, bayonet locking, cable end, in-line, panel mount, right angle panel mount, solder, pc, crimp contacts, caps. Meets enclosure rating IP66/IP68 and NEMA 250 when mated or covered.
View our wide range of Circular products
View our portfolio of Connectors / Cables
See all products from our supplier Switchcraft Inc
Eigenschaften:
- Easier to assemble
- New longer cable clamp secures cable up to 0.38
- New thicker heavier boot seals cable diameters between 0.23 & 0.38
- Brass nut secures cable clamp
- New crimp pins/contacts eliminate soldering
- Gold plated contacts standard
- Withstands 2 meter submersion for 24 hours
Geschirmter Mini-Con-X-Kabelsteckverbinder
Artikelnummer des Herstellers:
SF6282-6SG-520
Switchcraft Inc
Beschreibung:
Mini-Con-X shielded field-installable 6 position cable end connector; #20 AWG gold-plated solder-cup style female sockets; weather tight backshell w/.220' grommet. Meets IP66/IP68 NEMA 250 (6P) when mated.
View our wide range of Circular products
View our portfolio of Connectors / Cables
See all products from our supplier Switchcraft Inc
Eigenschaften:
- Complete replacement for MINI-CON-X
- Panels are factory assembled and sealed
- Scoop-proof connector design
- Anti-slip machined nut standard on panel connectors
- Precision machined housings
- Two shell sizes & multiple keying arrangements
Slimline-Steckverbinder, Stecker, 4 Stifte, Anordnung 3
Artikelnummer des Herstellers:
SL404MX
Switchcraft Inc
Beschreibung:
Slim-Line® Audio Connectors are a unique series of premium quality connectors featuring interchangeable inserts which allow any plug or receptacle to be male or female. This versatility is valuable in a wide variety of applications: microphones, public address systems, 2-way, CB, ham, and marine radios, audio-visual systems, industrial control and instrumentation, broadcast, security and medical electronics.
Miniature Cord Plugs feature nickel-plated copper alloy housings with matte finish on exterior parts. Plugs may be specified with inserts having 2-, 3-, 4- and 5-pins (male) or contacts (female), or 2-, 3-, or 4-contact receptacles having shunts (N.C.) on two contacts (special order only). Extra large cable clamp protects against pulling and twisting strains on terminations. Strain relief spring protects against excess cable wear at entry point at rear of housing. Cord plugs accept cables up to .281' (7.14 mm) diameter. Captive coupler ring feature (Series SL40) provides secure mechanical connection and protection against shock and vibration between cord plugs and mating plug (Series SL41) or receptacle.
View our wide range of Circular products
View our portfolio of Connectors / Cables
See all products from our supplier Switchcraft Inc
DFB Lasers zur Gasdetektion
Artikelnummer des Herstellers:
NLK1B5EAAA
NEL Photonics Business Group
Beschreibung:
10 mW, 1290-1360 nm DFB Laser in 14 pin Butterfly-Package mit Peltier-Kühler, Faserpigtail mit FC/PC Stecker.
Betrachten Sie unsere große Auswahl an Gassensorik Produkte
Betrachten Sie unser Portfolio von Sensoren
Betrachten Sie alle Produkte unseres Lieferanten NEL Photonics Business Group
Eigenschaften:
- Halbleiter-basierte Distributed Feedback (DFB)-Laser für Telekommunikations-und Spektroskopie- (TDLS) Anwendungen.
- Verfügbare Wellenlängen zwischen 1260 nm und 2350nm
- 14pin Butterfly and Φ5.6 TO-Can-Packages stehen zur Verfügung
PLC-Modem
Artikelnummer des Herstellers:
IT700YAINO
Yitran
Beschreibung:
The IT700 is a highly integrated System-on-a-Chip (SoC) powerline communication (PLC) modem. It incorporates Yitran’s extremely reliable Physical Layer (PHY), high performance Data Link Layer (DLL) and Yitran Network Layer (Y-Net) protocol.
An integrated microcontroller with extended 8051 core, 256KB Flash memory, 16KB RAM and 24 general purpose I/Os implements the protocol stack and offers the required flexibility to implement various protocols and applications. The microcontroller’s UART interface provides the connection to an external Host and application controller. The I²C interface connects an optional external EEPROM for configuration parameter storage.
The IT700 modem core uses Yitran’s patented Differential Code Shift Keying (DCSK) advanced spread spectrum modulation technique. DCSK enables extremely robust communication over existing electrical wiring with data rates up to 7.5Kbps. In addition to the inherent interference immunity provided by DCSK modulation, the device utilizes several mechanisms for enhanced communication robustness, such as a patented forward short-block soft-decoding error-correction algorithm and special synchronization algorithms.
The integrated Analog Frontend provides differential inputs and line driver outputs to connect via an external line filter and coupler to the power transmission lines. An integrated Phase Locked Loop Circuit allows the operation of the IT700 with a choice of different crystal oscillators. An integrated Power On Reset (POR) circuitry eliminates the need for any external reset components and provides an autonomous, safe power-up and power-down reset to the chip. The integrated 1.8V voltage regulator allows the IT700 to operate from a single 3.3V supply voltage.
The IT700 complies with worldwide regulations (FCC part 15, ARIB and CENELEC bands) and is an ideal solution for a variety of “No New Wires” narrowband PLC applications.
View our wide range of Analogue / Mixed signal products
View our portfolio of Semiconductors
See all products from our supplier Yitran
Eigenschaften:
- Full, low cost PLC modem and applications solution in a single chip.
- Incorporates YITRAN'S high performance DLL (Data Link Layer), Y-NET protocol and extremely robust PHY (Physical layer).
- Includes 8051 Micro for protocol stack and application.
- High in-phase and cross-phase reliability.
- Complies with worldwide regulation requirements (FCC, ARIB, CENELEC).
- Ideal for a 'No New Wires' applications utilizing existing electrical wiring and grids such as Energy Management and Demand Response, AMR (Automated Meter Reading/Management)/AMM/AMI, home/building automation, security access and more.
- Fully compatible with IT800 series
Widerstandsmessgerät
Artikelnummer des Herstellers:
Model 152-1
Trek Inc
Beschreibung:
The Trek Model 152-1 Surface/Volume Resistance Meter is designed to precisely measure surface or volume resistance on a wide variety of conductive, dissipative, and insulative materials. The Model 152-1 employs a measurement technique which conforms to ANSI/ESD Association standards for measuring surface resistance, resistivity, and volume resistance including STM2.1 for garments, STM4.1 for work surfaces, STM7.1 for flooring, STM9.1 for footwear, STM11.11 for planer materials, STM11.12 for volume resistance (IEC 61340-2-3), STM12.1 for seating, STM11.13 for two point resistance measurement and STM97.1 for floor materials/footwear. A variety of measuring probe electrode configurations are available and are purchased separately.
The Model 152-1 features exceptional measurement accuracy and wide measurement ranges of 103 to 1013 Ω using point-to-point probes or the two-point resistance probe for small surface area measurements.
The electrode test voltage for the measurement probe(s) is switch selectable for 10 V or 100 V operation to conform to the individual requirements of the ANSI/ESD Association standards and testing conditions. The selected test voltage is indicated on the LCD display. The light-weight portable unit is operable via batteries or an AC line power source with a battery eliminator.
View our wide range of Electrostatic products
View our portfolio of Test and Measurement products
See all products from our supplier Trek Inc
Eigenschaften:
- Exceptional accuracy, stability, & repeatability
- Complies with ANSI/ESD Association standards
- Wide measurement ranges of 103 to 1013 Ω
- Elastomer electrodes for excellent surface contact
- Battery or AC line operated with automatic shutoff
- Light-weight and portable
- Variety of probe types available
- Optional Accessories include Walking Test Adapter and Test Plate Set
- CE compliant
2g,Uniachsialer analoger Beschleunigungssensor, LCC-20 Bauform
Artikelnummer des Herstellers:
MS9002.D
Safran Colibrys
Beschreibung:
The MS9000 product is a single axis MEMS capacitive accelerometer based on a bulk micro-machined silicon element specifically designed for high stability, a low power ASIC for signal conditioning, a micro-controller for storage of compensation values and a temperature sensor. The product is low power, fully calibrated, robust and extremely stable and the electronic configuration provides a solid power on reset and ensures a full protection against brown-out. It operates from a single power supply voltage (between +2.5V and +5.5V) with low current consumption (< 0.5mA at 5V). The output is a ratiometric analog voltage that varies between +0.5V and +4.5V for the full-scale acceleration range at a voltage supply of +5V. The sensor is fully self-contained and packaged in a 20-pin LCC ceramic housing, thus insuring a full hermeticity.
View our wide range of Accelerometers
View our portfolio of Sensors
See all products from our supplier Colibrys
Eigenschaften:
- ±2g range
- Excellent bias stability (less than 0.05% of full scale)
- Single power supply (+2.5V to +5.5V, ratiometric voltage output)
- Low power
- Extra small 20 pin LCC ceramic package with hermetic sealing (8.9mm x 8.9mm)
- Individually calibrated (bias, scale factor and non linearity)
- Brown out protected
- RoHS compliant suitable for lead free soldering process and SMD mounting
- LCC mounting
- Evaluation board
Charged-Plate Monitor
Artikelnummer des Herstellers:
Model 157
Trek Inc
Beschreibung:
Trek's Model 157 Charged-Plate Monitor offers greater accuracy, stability and bandwidth than conventional designs. It combines Trek's patented precision charge measurement capability with features that drive down performance testing and maintenance costs.
Model 157 is suitable for semiconductor, disk drive, LCD and many other manufacturing environments that are sensitive to static charge. It can be used to test all types of ionizers including room ionization systems, AC and DC blowers, nuclear ionizers, gun type ionizers, and pulsed DC ionizers. It is also useful in materials evaluation for testing dissipative qualities.
Features include a user-friendly menu system with a clear and easy-to-read digital display, powerful graphics display, manual or bar code reading capability for quick ionizer identification (and storage of associated tests results), the capability of storing hundreds of ionizer tests on board for later download and data analysis, USB port for uploading/downloading test sequences and test results to a computer, optional thermohygrometer to record temp/humidity conditions, and a lightweight static-dissipative enclosure for optimum ease of transport.
Enhanced features now include the ability to store & retrieve data as data points or graphs, the option to record operator comments for future reference, and the addition of a 'fast' data acquisition mode (1 ms/data point) for rapidly-changing discharge events, to complement the 'normal' mode (10 ms/data point).
View our wide range of Electrostatic products
View our portfolio of Test and Measurement products
See all products from our supplier Trek Inc
Eigenschaften:
- Store and retrieve data as data points or graphs
- Record operator comments for reference
- Fast data acquisition mode now available
- Ideal for monitoring static charge in a manufacturing facility
- Suitable for dissipative testing of materials
EE20 Spulen 6 Pin 2 Abs für TH-Anwendungen
Artikelnummer des Herstellers:
B-EF20V-6-2-PET
Lodestone Pacific
Beschreibung:
The B-EF20V-6-2-PET from Lodestone Pacific is an 6 way Bobbin for Through Hole Applications
View our wide range of Accessories
View our portfolio of Magnetic components
See all products from our supplier Lodestone Pacific
NTC Goldelektrode Typ PSB-N3 Thermistor
Artikelnummer des Herstellers:
PBN3-43-SD1
Shibaura
Beschreibung:
The PSB-N3 range of NTC thermistors from Shibaura are an extremely rugged range of axial thermistors offering excellent stability in harsh environments. The PSB-N3 range is available with either Gold or Silver Palladium electrodes. When selected with Gold Electrodes the operating temperature range is -50°C to 300°C, which is reduced to -50°C to 120°C for Silver Palladium electrodes.
Read our article on NTC thermistors.
View our wide range of Temperature products
View our portfolio of Sensors
See all products from our supplier Shibaura
Eigenschaften:
- High stability.
- Wide distance between two lead wires enables use under severe condition where oil vapor is generated.
- Capable of automatic mounting in circuit board.
- Solder or Nickel plated leads available on request.
Isolierter DC/DC-Wandler BOB12 Series - 12 Watt
Artikelnummer des Herstellers:
BOB12-12D3
Bothhand Enterprise
Beschreibung:
The BOB12 Series are isolated 12W DC/DC converters. Designed with highly efficiency, allow the operating temperature range of these units to be -40°C to +85°C in a 24 pin DIP package with industry-standard footprint. Further features include wide 2 : 1 input voltage range, remote on/off control, short-circuit protection and over voltage protection.
View our wide range of DC/DC products
View our portfolio of Power supplies
See all products from our supplier Bothhand Enterprise
Eigenschaften:
- Wide 2 : 1 Input Voltage Range(9~18V,18~36V,36~75V)
- Remote On/Off
- Input / Output Isolation Voltage: 1.5K Vdc
- Extended Operating Temperature Range: -40°C to +85°C
- Output Short Circuit Protection: Continuous and Auto Recovery
- Over Voltage Protection: Clamp Mode
- High Efficiency up to 88%
- Shielded Metal Case with Insulated Baseplate
- Lead Free Design, RoHS Compliant
- 24pin DIP Package with Industry-Standard Footprint
- Customer Design Available
Isolierter DC/DC-Wandler BOB12 Series - 12 Watt
Artikelnummer des Herstellers:
BOB12-12S3
Bothhand Enterprise
Beschreibung:
The BOB12 Series are isolated 12W DC/DC converters. Designed with highly efficiency, allow the operating temperature range of these units to be -40°C to +85°C in a 24 pin DIP package with industry-standard footprint. Further features include wide 2 : 1 input voltage range, remote on/off control, short-circuit protection and over voltage protection.
View our wide range of DC/DC products
View our portfolio of Power supplies
See all products from our supplier Bothhand Enterprise
Eigenschaften:
- Wide 2 : 1 Input Voltage Range(9~18V,18~36V,36~75V)
- Remote On/Off
- Input / Output Isolation Voltage: 1.5K Vdc
- Extended Operating Temperature Range: -40°C to +85°C
- Output Short Circuit Protection: Continuous and Auto Recovery
- Over Voltage Protection: Clamp Mode
- High Efficiency up to 88%
- Shielded Metal Case with Insulated Baseplate
- Lead Free Design, RoHS Compliant
- 24pin DIP Package with Industry-Standard Footprint
- Customer Design Available
Isolierter DC/DC-Wandler BVA30W Series - 30 Watt
Artikelnummer des Herstellers:
BVA30-24D2W
Bothhand Enterprise
Beschreibung:
The BVA30W Series are isolated 30W DC/DC converters. Designed with highly efficiency, allow the operating temperature range of these units to be -40°C to +85°C in a 50.8×40.6×10.2mm shielded metal case. Further features include wide 4 : 1 input voltage range, remote on/off control, short-circuit protection, over voltage protection and over temperature protection.
View our wide range of DC/DC products
View our portfolio of Power supplies
See all products from our supplier Bothhand Enterprise
Eigenschaften:
- Wide 4 : 1 Input Voltage Range(9~36V,18~75V)
- Remote On/Off
- Input / Output Isolation Voltage: 1.5K Vdc
- Extended Operating Temperature Range: -40°C to +85°C
- Output Short Circuit Protection: Hiccup , continuous and Auto Recovery
- Over Voltage Protection: Clamp Mode
- Over Temperature Protection
- Shielded Metal Case with Insulated Baseplate
- Lead Free Design, RoHS Compliant
- Industry Standard Pinout
- Adjustable Output Voltage
- Customer Design Available
LFZVC90 Externes AC/DC Schaltnetzteil
Artikelnummer des Herstellers:
ZVC9ONS15E
Eos
Beschreibung:
Universal input, Efficiency to 92%, EN55022-B, FCC Part15 Level B Noise, Class 2 product, 12 V at 6.6 A and 15 V at 5.3 A.
View our wide range of AC/DC products
View our portfolio of Power supplies
See all products from our supplier Eos
Eigenschaften:
- Universal input
- Efficiency to 92%
- EN55022-B, FCC Part15 Level B Noise
- Class 2 product
- 12 V at 6.6 A and 15 V at 5.3 A
Digitaler Stromsensor
Artikelnummer des Herstellers:
CSDA1BA
Honeywell - Sensors
Beschreibung:
MICRO SWITCH CS series digital current sensor provides a logic level output that changes from approximately Vcc to 0.4 volts when the sensed current exceeds the operate point. Each digital sensor will operate on AC or DC current, but the output will turn off at every zero crossing when sensing AC current. Housing material: PET polyester.
View our wide range of Current sensors
View our portfolio of Sensors
See all products from our supplier Honeywell - Sensors
Eigenschaften:
- Open collector output
- Digital output
- AC or DC current sensing
- Through-hole design
- Output voltage isolation from input
- Minimum energy dissipation
- Maximum current limited only by conductor size
- Accurate, low cost sensing
- Operating temperature range -25 to 85°C
- RoHS compliant
Digitaler Stromsensor
Artikelnummer des Herstellers:
CSDA1BA-S
Honeywell - Sensors
Beschreibung:
MICRO SWITCH CS series digital current sensor provides a logic level output that changes from approximately Vcc to 0.4 volts when the sensed current exceeds the operate point. Each digital sensor will operate on AC or DC current, but the output will turn off at every zero crossing when sensing AC current. Housing material: PET polyester.
View our wide range of Current sensors
View our portfolio of Sensors
See all products from our supplier Honeywell - Sensors
Eigenschaften:
- Open collector output
- Digital output
- AC or DC current sensing
- Through-hole design
- Output voltage isolation from input
- Minimum energy dissipation
- Maximum current limited only by conductor size
- Accurate, low cost sensing
- Operating temperature range -25 to 85°C
- RoHS compliant
Closed-Loop-Stromsensor
Artikelnummer des Herstellers:
CSNS300M
Honeywell - Magnetic
Beschreibung:
This new series of closed loop current sensor offers a flexible solution to measuring currents up to ± 600 A. The sensors are small and have a large primary through hole to accept either a cable or a variety of different busbar sizes. The sensors can be mounted vertically or horizontally and come with connection options of integral Molex connector, pcb mounting pins, or a flying lead.
The sensors are closed loop devices and based on the principle of Hall effect and null balance method. The output from the current sensor is the balancing current that is the perfect image of the primary current reduced by the number of secondary turns at any time. The current can be expressed as a voltage by passing it through a load resistor.
View our wide range of Transformers
View our portfolio of Magnetics
See all products from our supplier Honeywell - Magnetic
Eigenschaften:
- Small footprint
- Increased measuring range in small package
- Measures dc, ac and impulse currents
- Flexible mounting
- Large primary conductor hole
- Three connection styles
- Operating temperature -40 °C to 85 °C
- High accuracy
0,1-7 GHz InGaP Kaskadierbarer Verstärker
Artikelnummer des Herstellers:
SKY65013-70LF
Skyworks
Beschreibung:
The SKY65013 is a general-purpose, broadband amplifier fabricated from Skyworks InGaP HBT process and packaged in an SOT-89 package. The amplifier's input and output impedances are 50 O, which allows these amplifiers to be cascaded without external impedance matching networks. The typical useable bandwidth of the SKY65013 is 0.1-7 GHz.
View our wide range of Amplifier products
View our portfolio of RF components
See all products from our supplier Skyworks
Eigenschaften:
- Broadband frequency range: 0.1 to 7.0 GHz
- Small signal gain = 12.5 dB typical @ 2 GHz
- High OIP3: +29 dBm typical
- OP1dB = +12.5 dBm typical @ 2 GHz
- Input and output impedance: 50 Ω nominal
- Single, positive DC supply voltage
- SOT-89 (4-pin, 1.5 x 4.0 mm) package (MSL1, 260 °C per JEDEC J-STD-020)
Closed-Loop-Stromsensor
Artikelnummer des Herstellers:
CSNE151-204
Honeywell - Magnetic
Beschreibung:
Closed loop current sensors measure AC, DC and impulse currents over 0-25, 0-50, 0-100, 0-600 and 0-1200 Amp ranges. The CSN Series is based on the principles of the Hall effect and the null balance or zero magnetic flux method (feedback system). The magnetic flux in the sensor core is constantly controlled at zero. The amount of current required to balance zero flux is the measure of the primary current flowing through the conductor, multiplied by the ratio of the primary to secondary windings. This closed loop current is the output from the device and presents an image of the primary current reduced by the number of secondary turns at any time. This current can be expressed as a voltage by passing it through a resistor.
View our wide range of Transformers
View our portfolio of Magnetics
See all products from our supplier Honeywell - Magnetic
Eigenschaften:
- Current sensing up to 1200 amps
- Measures AC, DC and impulse currents
- Lowest cost/performance ratio
- Rapid response, no overshoot
- High overload capacity
- High level of electrical isolation between primary and secondary circuits
- Small size and weight
KGZ-12 Series Hochpräziser Sauerstoffsensor
Artikelnummer des Herstellers:
KGZ-12SHORT
Honeywell - Sensors
Beschreibung:
These are high-accuracy oxygen sensors suitable for many applications. Originally developed for boiler applications, the product range has been extended to offer versions suitable for oxygen monitoring on board commercial and military aircraft, exhaust gas testing for automotive and medical test equipment.
The sensors employ two ZrO₂ discs with a small hermetically sealed chamber in between. One of the discs functions as a reversible oxygen pump, which is used to successively fill and empty the chamber. The second disc measures the ratio of the partial pressure difference and generates a corresponding sense voltage. A heat element produces the 700°C required for the ZrO₂ to operate as an O₂ pump. The time taken for the pump to achieve specific minimum and maximum pressures within this chamber is a measure of the partial oxygen pressure of the environment.
The sensors have to be operated by an electronic measuring circuit that controls sensor operation and signal processing. This circuit can either be incorporated into the customer's own electronics, or be purchased as a separate box of electronics from Honeywell.
View our wide range of Gas sensing products
View our portfolio of Sensors
See all products from our supplier Honeywell - Sensors
Eigenschaften:
- High-accuracy measurement
- Low power consumption
- No reference gas required
- Linear output signal
- No need for temperature stabilization
- Function testing and calibration in ambient air
- Long life
0,4-3,0 GHz Digitales fünf-Bit-Dämpfungsglied (1 dB LSB)
Artikelnummer des Herstellers:
SKY12339-350LF
Skyworks
Beschreibung:
The SKY12339-350LF is a monolithic, GaAs binary-weighted fivebit single positive control voltage digital attenuator. The device operates from 0.4 to 3.0 GHz. DC power consumption is very low, typically 1.5 mA, with a supply voltage of 5 V.
View our wide range of Attenuator products
View our portfolio of RF components
See all products from our supplier Skyworks
Eigenschaften:
- Broadband operation: 0.4 to 3.0 GHz
- Attenuation: 31 dB
- LSB attenuation: 1 dB
- Low insertion loss: 1.2 dB @ 900 MHz
- Positive voltage operation: 4.5 to 5.5 V
- Low current consumption: 1.5 mA typical @ 5 V
- Small, QFN (16-pin, 3 x 3 mm) package (MSL1, 260 °C per JEDEC J-STD-020)
Kapazitätsdiode mit hyperabruptem Übergang zur Verstimmung
Artikelnummer des Herstellers:
SMV1129-079LF
Skyworks
Beschreibung:
The SMV1129-079LF and SMV1139-011LF silicon hyperabrupt junction varactor diodes are designed for use in VCOs requiring low resistance. The low resistance of these varactors makes them appropriate for high Q resonators in wireless system VCOs to frequencies beyond 2.5 GHz.
View our wide range of Diode products
View our portfolio of RF components
See all products from our supplier Skyworks
Eigenschaften:
- High Q Low Series Resistance for Low Phase
- Designed for High Volume
- Commercial SPICE Models are Available
2300-2700 MHz Diversity Down-Converter Mischer mit hohem Verstärkungsfaktor und hoher Linearität
Artikelnummer des Herstellers:
SKY73025-11
Skyworks
Beschreibung:
The SKY73025 is a fully integrated diversity mixer that includes LO drivers, an LO switch, high linearity mixers, and large dynamic range IF amplifiers. Low loss RF baluns have also been included to reduce design complications and lower system cost.
View our wide range of Mixer / Demod / Modulator products
View our portfolio of RF components
See all products from our supplier Skyworks
Eigenschaften:
- IF frequency range: 50 to 500 MHz
- Conversion gain = 8.6 dB
- Output IP3 = +32.1 dBm
- Integrated LO drivers
- High linearity IF amplifiers
400-1000 MHz Hoher Dynamikbereich Aktivmischer
Artikelnummer des Herstellers:
SKY42068-355LF
Skyworks
Beschreibung:
The SKY42068-355LF is an integrated, high-dynamic range low-noise receiver down converter. It includes a double-balanced active mixer, LO amplifiers, and dual LO inputs selected by an external switch interface. The LO switch function is managed using an externally controlled CMOS-compatible interface.
View our wide range of Mixer / Demod / Modulator products
View our portfolio of RF components
See all products from our supplier Skyworks
Eigenschaften:
- High IIP3 mixer
- Wideband RF input frequency range (400 to 1000 MHz)
- CMOS-compatible control interface
- 5 V supply operation
- Supports frequency hopping applications
CO2-Sensor, 57,15 x 15,24x 34,67 mm, ±90 ppm Genauigkeit, 0-2000 ppm Bereich
Artikelnummer des Herstellers:
T6613-F
Amphenol Advanced Sensors
Beschreibung:
Compact CO2 module designed to integrate into existing controls and equipment.
View our wide range of Gas sensing products
View our portfolio of Sensors
See all products from our supplier Amphenol Advanced Sensors
Eigenschaften:
- An affordable gas sensing solution for OEMs.
- A reliable sensor design based on 15 years of engineering and manufacturing expertise.
- Flexible CO2 sensor platform designed to interact with other microprocessor devices.
- Eliminates the need for calibration in most applications with Telaire's patented ABC Logic™ software. Lifetime calibration warranty
Ferrit EMI-Platten
Artikelnummer des Herstellers:
MP0760-100
Laird - Magnetic Ceramic Products
Beschreibung:
Ferrite Disks and Plates provide a simple, cost-effective solution for radiated and inductively-coupled electromagnetic interference. After the PC board soldering process, a ferrite disk or plate can be installed directly on the source of EMI (such as active devices or unwanted antennas).
View our wide range of Ferrite EMI Suppressors
View our portfolio of EMC / EMI products
See all products from our supplier Laird - Magnetic Ceramic Products
Eigenschaften:
- Easy installation
- Each part for volume production is provided with permanent, double sided 3,5 mil acrylic adhesive with 218 oz./inch² adhesion.
- Samples and sample kits are available with removable and reusable adhesive for trial and error testing
- Variety of sizes offered
- For frequencies above 250 MHz, H series material is generally better than M series material
- Custom parts also available.
Hochspannungs-Verstärker
Artikelnummer des Herstellers:
40/15
Trek Inc
Beschreibung:
The Model 40/15 is a DC-stable, high-voltage power amplifier designed to provide precise control of output voltages in the range of 0 to ±40 kV DC or peak AC with an output current range of 0 to ±15 mA DC or peak AC. The amplifier is configured as noninverting with a fixed gain of 4000 V/V. Inverting and differential input options are available. A potentiometer with a calibrated dial and polarity switch provides a DC offset over a range of 0 to ±40 kV DC.
Industrial and research applications include dielectric studies, electrostatic deflection, and electrooptic modulation.
The Model 40/15 features an all solid-state design for high slew rate, wide bandwidth, and low-noise operation. The four-quadrant, active output stage sinks or sources current into reactive or resistive loads throughout the output voltage range. This is essential for achieving the accurate output response and high slew rates demanded by reactive loads.
The Model 40/15 is protected against overvoltage and overcurrent conditions that may be generated by active loads or by output short circuits to ground. Precision voltage and current monitors provide low-voltage representations of the high-voltage output and load current for monitoring purposes or for use as feedback signals in a closed-loop system. The Remote High Voltage Enable feature provides a connection for a remote device to turn on and off the high voltage of the instrument. This makes the 40/15 useful for automated or computer controlled systems.
View our wide range of High Voltage Amplifier products
View our portfolio of Test and Measurement products
See all products from our supplier Trek Inc
Eigenschaften:
- Output Voltage Range: 0 to ±40 kV DC or Peak AC
- Output Current Range: 0 to ±15 mA DC or Peak AC
- DC Accuracy Better Than 0.1% of Full Scale
- Slew Rate Greater Than 350 V/μs
- DC Offset Adjustment From 0 to 40 kV
- Adjustable Current Limit or Current Trip
- Precision Voltage and Current Monitors
Piezotreiber/Verstärker
Artikelnummer des Herstellers:
PZD700A-2-H
Trek Inc
Beschreibung:
The Trek Model PZD700A high-voltage DC-stable piezo driver/amplifier is designed to provide precise control of output Voltages in one of three, user specified, voltage ranges: 0 to ±700 V (±100 mA), 0 to +1.4 kV (±50 mA), or 0 to -1.4 kV (±50 mA). Inverting and noninverting input configurations are available. The Model PZD700A has an adjustable gain to 300 V/V. Applications for the Model PZD700A include piezoelectric driving/control, laser modulation, MEMS, semiconductor research, and piezoelectric vibration damping. Features include solid-state design, high slew rate, and small signal bandwidth greater than 200 kHz for all voltage ranges.
A four-quadrant active output stage sinks or sources current into reactive or resistive loads throughout the output voltage range. This technique is essential for achieving the accurate output responses and high slew rates demanded by reactive loads. The Model PZD700A is protected against overvoltage and overcurrent conditions that may be generated by active loads or by output short circuits to ground.
Precision voltage and current monitors provide low-voltage representations of the high-voltage output and load current for monitoring purposes or for use as a feedback signals in a closed loop system.
The Digital Enable feature provides a connection for a remote device to turn ON and OFF the high-voltage of the instrument. This makes the Model PZD700A suitable for automated or computer controlled systems.
The Model PZD700A has a Dynamics Adjustment feature which can be used to optimize the AC response of the output signal. Front panel LEDs display power on, high-voltage and voltage regulation or limit status of the unit. The Model PZD700A is available in single channel or dual channel configurations and can be operated on a bench top or, with optional hardware, in a standard 19-inch rack.
View our wide range of High Voltage Amplifier products
View our portfolio of Test and Measurement products
See all products from our supplier Trek Inc
Eigenschaften:
- Available Output Ranges:
- 0 to ±700 V DC or Peak AC, ±100 mA Current (Bipolar)
- 0 to +1.4 kV, DC or Peak AC, ±50 mA Current (Unipolar)
- 0 to -1.4 kV, DC or Peak AC, ±50 mA Current (Unipolar)
- Adjustable Gain Ratio: To 300 V/V
- DC Accuracy: Better Than 0.1% of Full Scale with 200 V/V Gain
- Slew Rates:
- Greater Than 380 V/μs for Bipolar Model
- Greater than 370 V/μs for Unipolar Models
- Precision Monitors For Voltage and Current
- Remote High-Voltage ON/OFF Suitable for Automated Systems
- Dynamic Adjustment Optimizes AC Response
- CE Compliant
Extrem kleiner Dreiachsen-Magnetsensor mit I2C-Schnittstelle
Artikelnummer des Herstellers:
MMC3280MS
Memsic
Beschreibung:
The MMC328xMS is a 3-axis magnetic sensor, it is a complete sensing system with on-chip signal processing and integrated I2C bus, allowing the device to be connected directly to a microprocessor eliminating the need for A/D converters or timing resources. It can measure magnetic field with a full range of ±8 gausses.
The MMC328xMS is packaged in an ultra small low profile LGA package (3.0 x 3.0 x 1.0 mm) and is available in operating temperature ranges of -40°C to +85°C.
The MMC328xMS provides an I2C digital output with 400 KHz, fast mode operation.
View our wide range of Magnetic products
View our portfolio of Sensors
See all products from our supplier Memsic
Eigenschaften:
- Full integration of 3-axis magnetic sensors and electronics circuits resulting in less external components needed
- Flexible output resolution available, up to 14bits
- Small Low profile package 3.0x3.0x1.0mm
- Low power consumption
- Power up/down function available through I2C interface
- With continuous operation mode, frequency selectable
- I2C Slave, FAST (≤400 KHz) mode
- 1.62V~3.6V wide power supply operation supported, with 1.8V typical operation.
- RoHS compliant
Simplex Monomode FC Optischer Steckverbinder
Artikelnummer des Herstellers:
FO2-SSB-4E
ACCA
Beschreibung:
Meets JIS C5973 F04 type and EIA/TIA 604-3A standards, Economical in both design and termination process, Screw type connector design precision mechanical dimension, Reduced assembly time and simplified training, Reduced maintenance and created consistent optical performance, Stable performance, <0.2 dB typical MM, <0.15 dB typical SM, Operating temperature - 20°C - 70°C, Storage temperature - 40°C - 80°C.
View our wide range of Fibre optic cable termination products
View our portfolio of Fibre optic components
See all products from our supplier ACCA
Eigenschaften:
- Meets JIS C5973 F04 type and EIA/TIA 604-3A standards
- Economical in both design and termination process
- Screw type connector design precision mechanical dimension
- Reduced assembly time and simplified training
- Reduced maintenance and created consistent optical performance
- Stable performance
- <0.2 dB typical MM
- <0.15 dB typical SM
- Operating temperature - 20°C - 70°C
- Storage temperature - 40°C - 80°C
Linearer Stromsensor, Unterbau mit 9SS Sensor
Artikelnummer des Herstellers:
CSLA2EJ
Honeywell - Sensors
Beschreibung:
MICRO SWITCH CS series linear current sensors incorporate our 91SS12-2 and SS94A1 linear output Hall effect transducer (LOHETTM). The sensing element is assembled in a printed circuit board mountable housing. Normal mounting is with 0.375 inch long 4-40 screw and square nut (not provided) inserted in the housing or a 6-20 self-tapping screw. The combination of the sensor, flux collector, and housing comprises the holder assembly. These sensors are ratiometric.
View our wide range of Current sensors
View our portfolio of Sensors
See all products from our supplier Honeywell - Sensors
Eigenschaften:
- Linear output
- AC or DC current sensing
- Through-hole design
- Fast response time
- Output voltage isolation from input
- Minimum energy dissipation
- Maximum current limited only by conductor size
- Adjustable performance and built-in temperature compensation assures reliable operation
- Accurate, low cost sensing
- Operating temperature range -25 to 85 °C
- Housing: PET polyester
Simplex Multimode SC Optischer Steckverbinder
Artikelnummer des Herstellers:
FO1-SMA-2D
ACCA
Beschreibung:
Meets JIS C5973 F04 type and EIA/TIA 604-3A standards, Economical in both design and termination process, Push pull connector design precision mechanical dimension, Reduced assembly time and simplified training, Reduced maintenance and created consistent optical performance, Stable performance, <0.2 dB typical MM, <0.15 dB typical SM, Operating temperature - 20°C - 70°C, Storage temperature - 40°C - 80°C.
View our wide range of Fibre optic cable termination products
View our portfolio of Fibre optic components
See all products from our supplier ACCA
Eigenschaften:
- Meets JIS C5973 F04 type and EIA/TIA 604-3A standards
- Economical in both design and termination process
- Push pull connector design precision mechanical dimension
- Reduced assembly time and simplified training
- Reduced maintenance and created consistent optical performance
- Stable performance
- <0.2 dB typical MM
- <0.15 dB typical SM
- Operating temperature - 20°C - 70°C
- Storage temperature - 40°C - 80°C
Linearer Stromsensor, Unterbau mit 9SS Sensor, Output Senke/Quelle
Artikelnummer des Herstellers:
CSLA2CDI
Honeywell - Sensors
Beschreibung:
Honeywell CS series linear current sensors incorporate our 91SS12-2 and SS94A1 linear output Hall effect transducer (LOHET™). The sensing element is assembled in a printed circuit board mountable housing. This housing is available in four configurations. Normal mounting is with 0.375 inch long 4-40 screw and square nut (not provided) inserted in the housing or a 6-20 self-tapping screw. The combination of the sensor, flux collector, and housing comprises the holder assembly. These sensors are ratiometric.
View our wide range of Current sensors
View our portfolio of Sensors
See all products from our supplier Honeywell - Sensors
Eigenschaften:
- Linear output
- AC or DC current sensing
- Through-hole design
- Fast response time
- Output voltage isolation from input
- Minimum energy dissipation
- Maximum current limited only by conductor size
- Adjustable performance and built-in temperature compensation assures reliable operation
- Accurate, low cost sensing
- Operating temperature range -25 °C to 85 °C
- Housing: PBT polyester
Simplex Multimode SC Optischer Steckverbinder
Artikelnummer des Herstellers:
FO1-SMA-1C
ACCA
Beschreibung:
Meets JIS C5973 F04 type and EIA/TIA 604-3A standards, Economical in both design and termination process, Push pull connector design precision mechanical dimension, Reduced assembly time and simplified training, Reduced maintenance and created consistent optical performance, Stable performance, <0.2 dB typical MM, <0.15 dB typical SM, Operating temperature - 20°C - 70°C, Storage temperature - 40°C - 80°C.
View our wide range of Fibre optic cable termination products
View our portfolio of Fibre optic components
See all products from our supplier ACCA
Eigenschaften:
- Meets JIS C5973 F04 type and EIA/TIA 604-3A standards
- Economical in both design and termination process
- Push pull connector design precision mechanical dimension
- Reduced assembly time and simplified training
- Reduced maintenance and created consistent optical performance
- Stable performance
- <0.2 dB typical MM
- <0.15 dB typical SM
- Operating temperature - 20°C - 70°C
- Storage temperature - 40°C - 80°C
Batteriesteckverbinder
Artikelnummer des Herstellers:
SB01-2032AR
ACCA
Beschreibung:
Designed for quick and easy installation and replacement of 2032 coin cell lithium batteries. The contacts of this holder are polarized to assure proper continuity and circuit protection.
View our wide range of Power supply products
View our portfolio of Connectors / Cables
See all products from our supplier ACCA
Eigenschaften:
- Polarized Holder.
- Retains cell securely to withstand shock and vibration.
- Reliable dual spring contacts assure low contact resistance.
D-Subminiatur-Steckverbinder, Hohe Dichte, Vertikal, Buchse
Artikelnummer des Herstellers:
DS13-44SV-2SGP
ACCA
Beschreibung:
View our wide range of I/O connectors
View our portfolio of Connectors / Cables
See all products from our supplier ACCA
Vigilant™ Serie LED-basierte L-856 Stroboskopleuchte mit hoher Leuchtintensität (weiß)
Artikelnummer des Herstellers:
D156-A33-270
Dialight
Beschreibung:
The Dialight Vigilant™ Series High Intensity LED White Strobe is the first all LED L-856 unit designed for the lighting of communication towers, smoke stacks, broadcast towers and other tall obstructions to aerial navigation, as specified by the FAA. A High Intensity system consists of 3 flash heads, 3 power supplies per level and 1 controller for the entire system. The flash heads will be placed on up to six levels of the structure for a maximum of 18 synchronized flash heads for a single tower. The 3 flash heads will provide 360 degrees of coverage.
Unlike conventional Xenon flashtube technology, little or no maintenance is required during its lifetime, drastically reducing maintenance costs associated with tower climbs. Working voltages of less than 200VDC are significantly less than those of Xenon flashtube designs; therefore, this system represents an advance in safety. Use of LED technology also provides a more shock and vibration resistant design, ensuring consistent flash intensity every time.
This IP66 rated product is factory sealed to ensure water tight seals are not compromised over the life of the strobe. Additionally, like all of Dialight's Obstruction Lights, patented optics provide sharp cutoff drastically minimizing light pollution and ground scatter.
See our article on safe, affordable obstruction lighting.
View our wide range of Obstruction products
View our portfolio of LEDs and Lighting products
See all products from our supplier Dialight
Eigenschaften:
- Complete performance 5 year warranty
- Shock and vibration resistant
- Patented optic with sharp beam cut-off
- Minimum ground scatter (community friendly light pattern)
- Specialized lens coating providing superior UV, scratch, and chemical resistance
- Factory sealed for an IP66 water ingress protection
- Rugged all metal mounting base
- Extremely low RF interference
IEC-Einbausteckverbinder, Stecker, Zwei Befestigungsarten, Faston
Artikelnummer des Herstellers:
EAC311
Switchcraft Inc
Beschreibung:
Receptacles are designed for use in European and domestic instrumentation, power rack mounted devices, test equipment and appliances. Three-pin male receptacles have .125 inch (3.18 mm) longer center (ground) pin. Ground circuit is established before power circuits 'make', and is maintained until after power circuits 'break'.
View our wide range of Power supply products
View our portfolio of Connectors / Cables
See all products from our supplier Switchcraft Inc
CAT5-RJ45-Steckverbinder
Artikelnummer des Herstellers:
RJB88-H1624-GSF
ACCA
Beschreibung:
View our wide range of Modular products
View our portfolio of Connectors / Cables
See all products from our supplier ACCA
DC-Buchse 1 mm DIP-Steckverbinder
Artikelnummer des Herstellers:
JD01-R2-3S10-TP
ACCA
Beschreibung:
View our wide range of Power supply products
View our portfolio of Connectors / Cables
See all products from our supplier ACCA
RJ45-Filter-Steckverbinder
Artikelnummer des Herstellers:
RJM88-H1100-GSF1
ACCA
Beschreibung:
View our wide range of Modular products
View our portfolio of Connectors / Cables
See all products from our supplier ACCA
VZ-1000 - Mehrsensor-System mit extrem großer Reichweite
Artikelnummer des Herstellers:
VZ-1000
General Dynamics
Beschreibung:
Capable of recognizing man-sized targets at over 20 kilometres, the thermal camera VZ-1000 is ideal for target acquisition in ground based defence and homeland security missions requiring maximum detection distance. The thermal camera VZ-1000 offers up to four fields-of view for long-range detection and identification.
With an integrated 60x zoom visible camera and a precision positioning system, The thermal camera VZ-1000 offers plug and play integration with perimeter surveillance systems. With its ruggedized design and cooled infrared sensor technology, this system allows for maximum threat detection with lower total cost of ownership. This powerful infrared camera is deployed around the world protecting our forces on the ground and ensuring the safety of our borders.
General Dynamics Global Imaging Technologies designs and manufactures a full portfolio of high-Performance thermal camera and camera systems that provide our customers the clarity, accuracy and reliability to capture the shot that matters and successfully complete their mission.
See our article to help you choose between cooled and uncooled technology.
View our wide range of Thermal Cameras
View our portfolio of Imaging for Security and Military products
See all products from our supplier General Dynamics Global Imaging Technologies
Eigenschaften:
- Cooled 3-5μm Infrared Sensor
- Tri- or Quad-Field-of-View Options
- Integrated 60x Zoom Visible Camera
- 320 x 246 Focal Plane Array (Optional)
- 640 x 512 Focal Plane Array
- Integrated Precision Positioning System
- 2-Axis Gyro-Stabilization (Optional)
- Auto and Manual Focus
- Laser Rangefinder (Optional)
MINI-USB-2.0-Stecker, Typ A
Artikelnummer des Herstellers:
USMA4-PHB-31R
ACCA
Beschreibung:
View our wide range of I/O connectors
View our portfolio of Connectors / Cables
See all products from our supplier ACCA
D-Subminiatur-Steckverbinder, Vertikal, Buchse
Artikelnummer des Herstellers:
DS09-25S-1SG
ACCA
Beschreibung:
View our wide range of I/O connectors
View our portfolio of Connectors / Cables
See all products from our supplier ACCA
D-Subminiatur-Steckverbinder, Hohe Dichte, Vertikal, Stecker
Artikelnummer des Herstellers:
DS07-62P-1SG
ACCA
Beschreibung:
View our wide range of I/O connectors
View our portfolio of Connectors / Cables
See all products from our supplier ACCA
HOA0902 Series Übertragungs-Encoder
Artikelnummer des Herstellers:
HOA0902-012
Honeywell - Sensors
Beschreibung:
The HOA0902 assembly consists of a dual channel IC detector and an IRED encased in a black thermoplastic housing. The device is typically used with an interrupter strip or disk (code wheel) to encode the rate and direction of mechanical motion. Applications include linear and rotary encoders; it is especially suited for the encoding function in an optical mouse.
The detector is a monolithic IC which consists of two narrow adjacent photodiodes, amplifiers stages and quadrature logic circuitry which provides two outputs; (1) a fixed-duration, low level active tachometer (counting) pulse which is generated whenever the illumination level passes through the sensing threshold, and (2) a direction output which is set to a logic high or low level dependent on which of the two channels is illuminated first. The tachometer output is an NPN collector which is internally connected to Vcc through a 10 kOhm (nominal) resistor; the direction output is a totem-pole configuration. Both outputs are capable of directly driving TTL loads. The IC design incorporates circuitry to compensate the sensitivity for the output power vs. temperature characteristic of the IRED.
The tachometer pulse is generated at both the increasing and decreasing illumination thresholds of the sensing channel, resulting in two tach pulses for each mechanical period of the interrupter.
Housing material is polycarbonate. Housings are soluble in chlorinated hydrocarbons and ketones. Recommended cleaning agents are methanol and isopropanol.
View our wide range of Infrared products
View our portfolio of Sensors
See all products from our supplier Honeywell - Sensors
Eigenschaften:
- Dual channel IC
- Direct TTL interface
- Resolution to 0.457 mm
- Internal temperature compensation
- 3.2 mm slot width
- Two mounting configurations
HOA096X/HOA097X Series IR opak Optoschmitt Sensor
Artikelnummer des Herstellers:
HOA6972-L51
Honeywell - Sensors
Beschreibung:
The HOA096X/097X series consists of an infrared emitting diode facing an Optoschmitt detector encased in a black thermoplastic housing. Detector switching takes place whenever an opaque object passes through the slot between emitter and detector. The photodetector consists of a photodiode, amplifier, voltage regulator, Schmitt trigger and an NPN output transistor with 10 kOhm (nominal) pull-up resistor. The user can choose from available options: (1) detector aperture size, (2) mounting tab configuration, and (3) housing material.
The HOA096X series utilizes an IR transmissive polysulfone housing which features smooth optical faces without external aperture openings; this feature is desirable when aperture blockage from airborne contaminants is a possibility. The HOA097X series employs an opaque polysulfone housing with aperture openings for use in applications where maximum rejection of ambient light is important and in situations in which maximum position resolution is desired. The HOA096X/097X series employs plastic molded components.
Housing material is polysulfone. Housings are soluble in chlorinated hydrocarbons and ketones. Recommended cleaning agents are methanol and isopropanol.
Device Polarity: Buffer - Output is LO when optical path is blocked.
Inverter - Output is HI when optical path is blocked.
View our wide range of Infrared products
View our portfolio of Sensors
See all products from our supplier Honeywell - Sensors
Eigenschaften:
- Direct TTL interface
- Buffer or inverting logic available
- Three device output options
- Four mounting configurations
- Choice of detector aperture
- 3.18 mm slot width
LT Series Standardmäßiger linearer Positionswandler
Artikelnummer des Herstellers:
LTS series
Honeywell - Sensors
Beschreibung:
The LTS Series is a small-diameter linear position transducer that is rugged enough to withstand hostile factory environments. Using a proprietary dual wiper, internal ball joint and the MystR® conductive plastic film the LT provides a usable output at high vibration levels over long periods of time. LT transducers use precious metal wipers to further enhance reliability. The LT can be provided with shaft seals for spray or hose down environments.
Intrinsically safe for Class I, II and III Division I, Groups A, B, C, D, E, F and G for hazardous (indoor/outdoor) NEMA 4 locations. V max.=30 V, I max.=100 mA, Ci=0, Li,=0mH.
View our wide range of Position products
View our portfolio of Sensors
See all products from our supplier Honeywell - Sensors
Eigenschaften:
- MystR® plastic element - Tested up to one billion operations
- 1/2 inch diameters - Fit in tight spaces and clamps easily to cylinders
- Dual wiper design - Improves shock and vibration performance
- Extruded wiper block guides - Smooth quiet motion, extends operating life
- Anodized extruded aluminium housing - Tolerates clamping loads
- Stainless steel shaft - Full performance in hostile environments
- Precious metal contact - Low noise level over entire life
- Absolute continuous measurement - Accurate position at power up
AQLT Series Wellenloser wasserbeständiger linearer Positionswandler
Artikelnummer des Herstellers:
AQLT series
Honeywell - Sensors
Beschreibung:
The AQLT series are shaft less waterproof linear potentiometers designed to operate in wet/washdown and in-tank environments.
The AQLT series features an external actuator magnetically coupled to a position feedback element. The magnetic actuator replaces the shaft found in traditional linear transducers, which eliminates the need for additional stroke length mounting space and improves shock and vibration performance.
Precious metal dual wipers, MystR® proprietary conductive plastic, and anodized aluminium housings assure long life and reliable operation in numerous applications.
Intrinsically safe for Class I, II and III Division I, Groups A, B, C, D, E, F and G for hazardous (indoor/outdoor) NEMA 4 locations. V max.=30 V, I max.=100 mA, Ci=0, Li,=0mH.
View our wide range of Position products
View our portfolio of Sensors
See all products from our supplier Honeywell - Sensors
Eigenschaften:
- 3/8 inch (AQMLT) and 1/2 inch (AQLT) body diameter - Fit in tight spaces and clamps easily to cylinders
- Multiple finger wiper design - Improves shock and vibration performance
- Extruded wiper block guides - Smooth quiet motion; extends operating life
- MystR® plastic element - tested up to one billion operations
- Anodized extruded aluminium housing - Tolerates clamping loads
- Sealed construction - Full performance in hostile environments
- Precious metal contact - Low noise level over entire life
- Absolute continuous measurement - Accurate position at power up
DuraStar Stangenloser linearer Positionswandler
Artikelnummer des Herstellers:
DR series
Honeywell - Sensors
Beschreibung:
The DuraStar rodless linear position transducer incorporates over fifty years of MystR® technology into the longest lasting factory-rugged potentiometer. It allows large misalignment of shaft and housing, while providing whisper-quiet operation and smooth, clean signal output. MystR® provides the DuraStar excellent durability, especially in dither operation which is so often the determining factor in a potentiometer's life. It is an excellent replacement unit to reduce maintenance operations. The rodless side-sealed DuraStar can also be used to replace a rodded potentiometer in contaminated applications to improve performance while providing long life.
Intrinsically safe for Class I, II and III Division I, Groups A, B, C, D, E, F and G for hazardous (indoor/outdoor) NEMA 4 locations. V max.=30 V, I max.=100 mA, Ci=0, Li,=0mH.
View our wide range of Position products
View our portfolio of Sensors
See all products from our supplier Honeywell - Sensors
Eigenschaften:
- Vibration damped element - No wiper bounce in high vibration environments
- Extended side bearing - Improved life under high misalignment
- Extruded wiper carrier guides - Smooth operation under large misalignment
- Rugged ribbed housing - For industrial environment
- Precious metal wipers - Insures high performance, low noise, no oxidation
- MystR® plastic elements - Tested up to one billion operations
- High DC level output - Works with simple controllers
- High performance bearings - Long life even under side-load conditions
- Absolute continuous measurement - Accurate position at power-up
ZH10 Series Einzelner Halleffektsensor Null-Geschwindigkeit
Artikelnummer des Herstellers:
ZH10
Honeywell - Sensors
Beschreibung:
The ZH10 Hall-effect Speed Sensor Sensors provide a durable, cost-effective solution in most harsh environments. The sensor is available in a 11.9 mm diameter 25.4 mm long aluminium package. The aluminium package is simple to install and adjust and does not require rotational orientation.
View our wide range of Speed products
View our portfolio of Sensors
See all products from our supplier Honeywell - Sensors
Eigenschaften:
- Low cost
- Omni-directional sensor to target orientation
- Digital output
- Small size
- Low power consumption
SMD6400(B) Series Fototransistor
Artikelnummer des Herstellers:
SMD6400-001B
Honeywell - Sensors
Beschreibung:
The SME6700 and SMD6400 Series surface mount infrared components are small ceramic packages (2.8 mm x 3.2 mm x 1.5 mm) in an un-lensed, top-emitting and sensing package. The SME6700 is an aluminium gallium arsenide infrared emitting diode (IRED). This component supplies optimum optical characteristics and can be used with the SMD6400 phototransistor. The small size and high power dissipation properties of the IRED promote PC (Printed Circuit) board miniaturization and high density placement.
View our wide range of Infrared products
View our portfolio of Sensors
See all products from our supplier Honeywell - Sensors
Eigenschaften:
- Low profile, small package size for flexible layout of multiple channels and custom arrays
- Compatible with automated solder processes:
- - IR reflow
- - vapour phase
- - solder wave
- - convection oven
- Helps eliminate mixed technology PC boards
- Will operate on a dc or pulse mode for increased output
- Light pipe compatible
- Top-emitting and sensing area
- Tape and reel packaging option - pick and place machine compatible
HRS100 Series Hall-Effekt-Drehpositionssensor
Artikelnummer des Herstellers:
HRS100 series
Honeywell - Sensors
Beschreibung:
The HRS100 series uses Hall-effect technology to provide angular position information. The use of magnetically coupled information, in place of a mechanical wiper assembly, provides long life and a cost-effective solution for harsh environments that include temperature, vibration, dither, moisture and dirt. The HRS100 Series is packaged in a metal housing with a 9.5 mm diameter bushing and a 6.35 mm diameter slotted shaft. Termination is either solder lug or flying wire leads.
View our wide range of Position products
View our portfolio of Sensors
See all products from our supplier Honeywell - Sensors
Eigenschaften:
- Solid-state Hall-effect technology - Provides non-contact operation, long service life, low torque actuation and reduces worn-out mechanisms
- Choice of termination - Provides application flexibility
- 10 M cycle product life (typical) - Provides long life in the application
RPN Series Drehpositionssensoren
Artikelnummer des Herstellers:
RPN series
Honeywell - Sensors
Beschreibung:
RPN series rotary position sensors use a magnetically biased, Hall-effect integrated circuit (IC) to sense rotary movement of the actuator shaft over a set operating range. Rotation of the actuator shaft changes the IC's position relative to the magnets. The resulting flux density change is converted to a linear output. The IC, together with conditioning and protection circuitry, and two permanent magnets, is sealed in a rugged package of IP67 or greater for durability in most harsh environments.
Solid-state Hall-effect technology provides non-contact operation, long service life, low torque actuation and reduced wear-out mechanisms. Eight operating ranges (50°, 60°, 70°, 90°, 120°, 180°, 270° and 360°) are tolerant to over travel and allow use in most common applications. Five different supply voltages and eight different output configurations, in either mA or Vdc, improve compatibility with a variety of control systems.
Two versions provide dual outputs for use where an additional output may be desired where redundancy and backup is needed. Another potential application includes using one output for an indicator and the second for the control system.
Lever versions are available. The easy-to-mount sensor has a mounting flange with two round or oval mounting holes. All products have AMP or Deutsch receptacles.
View our wide range of Position products
View our portfolio of Sensors
See all products from our supplier Honeywell - Sensors
Eigenschaften:
- Solid-state Hall effect technology
- Eight operating ranges, up to 360°
- Variety of supply voltages and output configurations
- Rugged sealed package with integral connector
- IP67 or greater
- Integrated reverse polarity, short circuit and EMC protection
- Single or dual output versions available
- Industry-standard termination
0,7-3,8 GHz Extrem Rauscharmer Verstärker
Artikelnummer des Herstellers:
SKY67151-396LA
Skyworks
Beschreibung:
The SKY67151-396LF is GaAs, pHEMT Low-Noise Amplifier (LNA) with an active bias, high linearity, superior gain, and industry-leading Noise Figure (NF) performance from 700 to 3800 MHz. The device features Skyworks advanced, proprietary pHEMT enhancement mode process in a compact 2 x 2 mm, 8-pin Dual Flat No-Lead (DFN) package.
The internal active bias circuitry provides stable performance over temperature and process variation. The device offers the ability to externally adjust supply current. Supply voltage is applied to the RFOUT/VDD pin through an RF choke inductor. Pin 3 (VBIAS) should be connected to RFOUT/VDD through an external resistor to control the supply current. The RFIN and RFOUT/VDD pins should be DC blocked to ensure proper operation.
The SKY67151-396LF operates in the frequency range of 0.7 to 3.8 GHz using a common layout and band-specific tunes.
View our wide range of Amplifier products
View our portfolio of RF components
See all products from our supplier Skyworks
Eigenschaften:
- Ultra-low Evaluation Board NF:
- − 0.25 dB @ 0.9 GHz:
- − 0.35 dB @ 1.9 GHz
- − 0.49 dB @ 2.5 GHz
- − 0.70 dB @ 3.6 GHz
- High OIP3 performance: >+35 dBm over 700 to 2700 MHz
- Adjustable supply current from 30 to 100 mA
- Flexible bias voltage: 3 to 5 V
- Temperature and process-stable active bias
- Miniature DFN (8-pin, 2 x 2 mm) package (MSL1 @ 260 °C per JEDEC J-STD-020)
GE Series Snap-In Hochleistungs-IEC-Steckerfilter
Artikelnummer des Herstellers:
15GENW3EH-R
Delta Electronics
Beschreibung:
The 15GENW3EH-R from Delta Electronics is a 15 amp device from the GE Series of Snap-In Mounting High Performance IEC Connector Filters
View our wide range of Filters and Inlets
View our portfolio of EMC / EMI products
See all products from our supplier Delta Electronics
Eigenschaften:
- Snap-in mounting type to reduce labour cost. Compact and reliable at low cost
- Bleeder resistor can be added with suffix -R on part numbers, except G3H,G3V,W3V,G3J,W3J,types
- Optional side snap-in mounting clip type with suffix (H) on part numbers
- All part numbers are UL recognized, CSA certified and VDE approved
- With optional Y-Cap from 100pF to 3300pF
- Safety under apply for 03/06/10GENG3U(H) series
SMT 2450 MH Leistungsteiler, 50 Ω auf 50 Ω
Artikelnummer des Herstellers:
2450PD14A0100
Johanson Technology
Beschreibung:
The 2450PD14A010 is a low profile, surface mount power divider from Johanson Technology . One of a range of small, highly stable and integrated RF ceramic components manufactured with a proprietary LTCC (low temperature co-fired ceramic) process the 2450PD14A010 is specified for frequencies in the 2.4GHz to 2.5GHz range. Designed for 500mW power levels the 2450PD14A0100 has a minimum return loss of 14dB, a phase balance of 0O ±3 and a minimum isolation of 25dB. Fully compliant with RoHS and REACH the has a footprint of just 1.6mm x 0.8mm.
View our wide range of Coupler / Divider products
View our portfolio of RF components
See all products from our supplier Johanson Technology
Hochtemperatur VRS-Sensor
Artikelnummer des Herstellers:
3030HTB25
Honeywell - Sensors
Beschreibung:
High Temperature VRS sensors are designed for use in applications where the sensor is exposed to temperatures up to 260 OC. Sealed Front-End versions are available for applications where the sensor is exposed to fluids, lubricants or adverse environmental conditions. Passive VRS (Variable Reluctance Speed) Magnetic Speed sensors are simple, rugged devices that do not require an external voltage source for operation. A permanent magnet in the sensor establishes a fixed magnetic field. The approach and passing of a ferrous metal target near the sensor's pole piece (sensing area) changes the flux of the magnetic field, dynamically changing its strength. This change in magnetic field strength induces a current into a coil winding which is attached to the output terminals. The output signal of a VRS sensor is an ac voltage that varies in amplitude and wave frequency as the speed of the monitored device changes, and is usually expressed in peak to peak voltage (Vp-p). One complete waveform (cycle) occurs as each target passes the sensor's pole piece. If a standard gear were used as a target, this output signal would resemble a sine wave if viewed on an oscilloscope.
View our wide range of Speed products
View our portfolio of Sensors
See all products from our supplier Honeywell - Sensors
Eigenschaften:
- Self-powered operation
- Direct conversion of actuator speed to output frequency
- Simple installation
- No moving parts
- Designed for use over a wide range of speeds
- Adaptable to a wide variety of configurations
- Customized VRS products for unique speed sensing applications
- Output voltages: 4.7 Vp-p to 125 Vp-p
Hochtemperatur VRS-Sensor
Artikelnummer des Herstellers:
MA243HT
Honeywell - Sensors
Beschreibung:
High Temperature VRS sensors are designed for use in applications where the sensor is exposed to temperatures up to 260 OC. Sealed Front-End versions are available for applications where the sensor is exposed to fluids, lubricants or adverse environmental conditions. Passive VRS (Variable Reluctance Speed) Magnetic Speed sensors are simple, rugged devices that do not require an external voltage source for operation. A permanent magnet in the sensor establishes a fixed magnetic field. The approach and passing of a ferrous metal target near the sensor's pole piece (sensing area) changes the flux of the magnetic field, dynamically changing its strength. This change in magnetic field strength induces a current into a coil winding which is attached to the output terminals. The output signal of a VRS sensor is an ac voltage that varies in amplitude and wave frequency as the speed of the monitored device changes, and is usually expressed in peak to peak voltage (Vp-p). One complete waveform (cycle) occurs as each target passes the sensor's pole piece. If a standard gear were used as a target, this output signal would resemble a sine wave if viewed on an oscilloscope.
View our wide range of Speed products
View our portfolio of Sensors
See all products from our supplier Honeywell - Sensors
Eigenschaften:
- Self-powered operation
- Direct conversion of actuator speed to output frequency
- Simple installation
- No moving parts
- Designed for use over a wide range of speeds
- Adaptable to a wide variety of configurations
- Customized VRS products for unique speed sensing applications
- Output voltages: 4.7 Vp-p to 125 Vp-p
RTY Series, Single Output, Europäische Pinanordnung
Artikelnummer des Herstellers:
RTY series
Honeywell - Sensors
Beschreibung:
The RTY series Hall-Effect rotary position sensors provide angle monitoring in harsh transportation and industrial applications at a competitive cost. These products use a magnetically biased, Hall-effect integrated circuit (IC) to sense rotary movement of the actuator shaft over a set operating range. Rotation of the actuator shaft changes a magnet's position relative to the IC. The resulting flux density change is converted to a linear output. The IC, together with conditioning and protection circuitry, and the permanent magnet, is sealed in an IP67-qualified rugged package for durability in most harsh environments. Eight operating ranges (50°, 60°, 70°, 90°, 120°, 180°, 270° and 360°) are tolerant to over-travel and allow use in most common applications. Low voltage and high voltage versions cover an input voltage range of 4.5 Vdc to 30 Vdc. Most applications require no lever, and no brackets are necessary. Honeywell's industry-leading capabilities in research and development provide the customer with known quality and support.
View our wide range of Position products
View our portfolio of Sensors
See all products from our supplier Honeywell - Sensors
Eigenschaften:
- 12 M cycle product life: Provides long life in the application
- Solid-state Hall-effect technology: Provides non-contact operation, long service life, low torque actuation and reduces worn-out mechanisms
- Rugged IP67-sealed package with integral connector: Allows for use in harsh environments
- Automotive-grade EMI/EMC testing, integrated reverse polarity, and short circuit: Provides protection against installation errors and frequencies in the environment
- Industry-standard AMP termination, 32 mm mounting pitch, North American and European pinout styles, and compact package: Provide drop-in replacement
- Eight operating ranges up to 360°: Provides flexibility in multiple applications, allowing OEMs the range of travel needed for the application
RTY Series, Single Output, Nordamerikanische Pinanordnung
Artikelnummer des Herstellers:
RTY series
Honeywell - Sensors
Beschreibung:
The RTY series Hall-Effect rotary position sensors provide angle monitoring in harsh transportation and industrial applications at a competitive cost. These products use a magnetically biased, Hall-effect integrated circuit (IC) to sense rotary movement of the actuator shaft over a set operating range. Rotation of the actuator shaft changes a magnet's position relative to the IC. The resulting flux density change is converted to a linear output. The IC, together with conditioning and protection circuitry, and the permanent magnet, is sealed in an IP67-qualified rugged package for durability in most harsh environments. Eight operating ranges (50°, 60°, 70°, 90°, 120°, 180°, 270° and 360°) are tolerant to over-travel and allow use in most common applications. Low voltage and high voltage versions cover an input voltage range of 4.5 Vdc to 30 Vdc. Most applications require no lever, and no brackets are necessary. Honeywell's industry-leading capabilities in research and development provide the customer with known quality and support.
View our wide range of Position products
View our portfolio of Sensors
See all products from our supplier Honeywell - Sensors
Eigenschaften:
- 12 M cycle product life: Provides long life in the application
- Solid-state Hall-effect technology: Provides non-contact operation, long service life, low torque actuation and reduces worn-out mechanisms
- Rugged IP67-sealed package with integral connector: Allows for use in harsh environments
- Automotive-grade EMI/EMC testing, integrated reverse polarity, and short circuit: Provides protection against installation errors and frequencies in the environment
- Industry-standard AMP termination, 32 mm mounting pitch, North American and European pinout styles, and compact package: Provide drop-in replacement
- Eight operating ranges up to 360°: Provides flexibility in multiple applications, allowing OEMs the range of travel needed for the application
SS520 Series Dualer digitaler Hall-Effekt-Positionssensor
Artikelnummer des Herstellers:
VF526DT
Honeywell - Sensors
Beschreibung:
The Speed and Direction Hall effect sensor has two distinct Hall sensing elements precisely located 1.4 mm apart on a single integrated circuit chip, which is then encapsulated in a thermoset molding material. Two active Hall latches provide indication of the speed and direction of a magnetic gradient across the face of the package, such as the gradient from a rotating ring magnet.
The small, 4-pin SOT89 style package surface mounts on PC boards and flexible circuits.
Built-in temperature compensation is optimized to match the temperature coefficient of low cost magnets and track their performance over temperature. Latching magnetics are standard for reliable operation.
A unique regulator circuit provides extremely stable operation with supply voltages as low as 3.4 Vdc and as high as 24 Vdc. A typical room temperature current consumption of 7.5 mA helps conserve power in battery operation. SS520 series sensors can use existing power supply sources in most applications, and can be directly interfaced with many electronic components without buffering or compensation circuitry.
CAUTION: WAVE SOLDER DAMAGE do not wave solder this product.
Wave soldering may negatively affect the sensor performance and reliability. Subjecting the sensor to wave soldering will void Honeywell's warranty. Failure to comply with these instructions may result in product damage.
NOTE: Interruption of power to a latching device may cause the output to change state when power is restored. If a magnetic field of sufficient strength is present, the sensor output will be in the condition dictated by the magnetic field.
View our wide range of Magnetic products
View our portfolio of Sensors
See all products from our supplier Honeywell - Sensors
Eigenschaften:
- Single miniature plastic package includes two separate Hall
- sensors
- Frequency signal for speed output
- Logic level (High or Low) signal for direction output
- Temperature compensated magnetics
- Functionality of two discrete Hall sensors and logic circuitry
- outputs
- Symmetry of operate/release points about zero gauss
- (bipolar/latching)
- Low current consumption
- Wide operating voltage range
Sonde für Elektrostatik-Voltmeter
Artikelnummer des Herstellers:
6000B13C
Trek Inc
Beschreibung:
The patented design of Trek probes provide the largest possible signal strength to reduce noise and drift, and to maintain optimum performance at wider probe-to-surface distances. In Trek probes, the electrode is located on a vibrating reed. This places the electrode in motion, in the aperture, close to the surface for maximum signal strength. Trek probe designs eliminate the need for close-tolerance components. This significantly improves noise and drift performance under varying temperatures, high humidity, and in the presence of contaminating particulates.
View our wide range of Electrostatic products
View our portfolio of Test and Measurement products
See all products from our supplier Trek Inc
Eigenschaften:
- High Resolution
Integrierter Geräteserver
Artikelnummer des Herstellers:
XPORT - Direct+
Lantronix
Beschreibung:
The compact XPort® Direct+™ is an embedded device server module delivering high-performance Ethernet connectivity and web server capabilities.
Manufacturers of high-volume, price-sensitive products can now rapidly and even more affordably web-enable virtually any device with a serial interface on its microcontroller. With this capability, OEMs can offer remote access and control over the Internet as a standard feature in their products.
View our wide range of Embedded Networking products
View our portfolio of M2M and Wireless products
See all products from our supplier Lantronix
Eigenschaften:
- Powerful and affordable networking for any device with a serial
- interface on its microcontroller
- Integrated module with RJ45 and dedicated networking SoC
- Web server, TCP/IP protocol stack and Windows deployment software
- Up to 921 Kbps data rate
- Compact low profile (<12 mm)
- 2 x 12 pin, 2 mm headers
- Three GPIO pins
- RS-232/RS-485 ready
- Operating System Support: Windows® 98 / ME / NT / 2000 / XP / Vista-based DeviceInstaller™
Mesa Beam-Lead-PIN-Diode
Artikelnummer des Herstellers:
DSM8100-000
Skyworks
Beschreibung:
Skyworks Silicon Mesa Beam-Lead PIN diode is surrounded by a glass frame for superior strength and electrical performance that surpasses the standard beam-lead PINs. The DSM8100-000 is designed for low resistance, low capacitance and fast switching time. The oxide-nitride passivation layers provide reliable operation and stable junction parameters that provide complete sealing of the junction permitting use in assemblies with some degree of moisture sealing. A layer of glass provides increased mechanical strength.
The DSM8100 is designed for microstrip or stripline circuits and for circuits requiring high isolation from a series-mounted diode such as broadband multithrow switches, phase shifters, limiters, attenuators and modulators.
View our wide range of Diode products
View our portfolio of RF components
See all products from our supplier Skyworks
Eigenschaften:
- Low capacitance
- Low resistance
- Fast switching
- Oxide-nitride passivated
- Durable construction
- Lead (Pb)-free, RoHS-compliant, and Green™
3156 Series Hermetische Thermostate in Flachbauweise
Artikelnummer des Herstellers:
3156U 00490004
Honeywell - Thermal
Beschreibung:
The 3156 Series consists of a single pole, single throw switch activated by a snap-action bimetal disc. Temperature calibrations are pre-set at the factory and each unit is 100% thermally and mechanically inspected. It is available to open or close on temperature rise. The case is laser welded to form a hermetically-sealed steel housing with a glass-to-metal seal at the terminal junction. The low silhouette and compact design often make it especially well suited for applications that require miniaturization. They have gold alloy contacts for low voltage applications.
View our wide range of Temperature products
View our portfolio of Sensors
See all products from our supplier Honeywell - Thermal
Eigenschaften:
- Hermetically sealed
- Tight tolerances
- Tight differential
- Low profile
AirPrime™ XM0110 GPS Front-end Module
Artikelnummer des Herstellers:
AirPrime XM0110
Sierra Wireless
Beschreibung:
The Sierra Wireless AirPrime™ XM0110 GPS module is an easy-to-use GPS solution, designed to offer an optimised GPS feature integration for wireless applications using Sierra Wireless AirPrime™ embedded wireless modules.
SiRFstarIV™ GPS technology from CSR plc, the AirPrime XM0110 enables faster time-to-market for your GSM/GPS application.
Eigenschaften:
- Fast and accurate location fixes
- Cost-optimised final product architecture
- Low power consumption
- Fast time-to-market
- Integrated autonomous and server based Assisted GPS
- Investment protection with over-the-air upgrades
Drahtwicklung, Geformt Induktor
Artikelnummer des Herstellers:
SMP5025-822KLF
Gowanda
Beschreibung:
The SMP5025-822KLF is a Wirewound, Moulded Inductor from Gowanda Electronics Inc. with an inductance of 0.082µH, a rated DC current of 0.913A and a DC resistance of 0.468Ω. Gowanda Electronics, established for over 40 years, specialises in providing high performance inductors for demanding applications in the industrial, communications, military/aerospace, medical, and power conversion industries.
View our wide range of Inductors
View our portfolio of Magnetic components
See all products from our supplier Gowanda
PT Series 3-Phasen P.C.B. Filter
Artikelnummer des Herstellers:
30PTW6
Delta Electronics
Beschreibung:
The 30PTW6 from Delta Electronics is a 30 amp device from the PT Series of 3-Phase P.C.B. Filters
View our wide range of Filters and Inlets
View our portfolio of EMC / EMI products
See all products from our supplier Delta Electronics
Intel Atom basierend Type 2 COM Express Modul
Artikelnummer des Herstellers:
H6816
Hectronic
Beschreibung:
H6816 is available with three processor options. In the lower end of the performance span, Intel® Atom™ N2600 is found and turns H6816 into a fan-less platform with dual core performance and only 3.5 Watt TDP.
Normally COM modules with this Intel® Atom™ processor platform offer single channel 18-bit LVDS only. H6816 is an exception offering Dual Channel 24-bit LVDS directly from the module for applications requiring dual independent 24-bit displays.
View our wide range of Computer-on-Modules
View our portfolio of Embedded computing products
See all products from our supplier Hectronic
Eigenschaften:
- Dual-core CPU options:
- Intel® Atom™ N2600 (3.5W TDP)
- Intel® Atom™ N2800 (6.5W TDP)
- Intel® Atom™ D2550 (10W TDP)
- Intel® NM10 Chipset
- 1 DDR3 SODIMM memory, up to 2GB
- 4 PCIe x1, 4 PCI
- 8 USB, 8-bit DIO, 1 IDE
- 1 VGA, 1 LVDS
- 1 Gigabit LAN
CS Series Monostabile Verschlüsse, Apertur bis zu 90 mm
Artikelnummer des Herstellers:
CS series
Vincent Associates
Beschreibung:
The CS Shutter series is of special interest to applications where specific constraints require a smaller format than other Vincent Associates shutters such as the VS shutter series. This particular Vincent Associates shutter series includes the CS25, CS35, CS65, and the largest shutter with a 90mm aperture size, CS90HS.
View our wide range of Shutters
View our portfolio of Imaging for Science and Industry products
See all products from our supplier Vincent Associates
Eigenschaften:
- Aperture : 25mm, 35mm, 45mm, 65mm and 90mm
- Number of blade: 5 or 6 for CS65 and CS90HS models
- Time to open: 9.0ms to 70.0ms
- Exposure repetition rate : DC to 30Hz (depends on model)
- Pulse voltage to open: +65.0 VDC or +70.0 VDC
- Outer dimension: 2.37" , 3.33", 4", 5", 7"
VS14 14 mm Monostabile Verschlüsse
Artikelnummer des Herstellers:
VS14
Vincent Associates
Beschreibung:
The UNIBLITZ® VS14 shutter series has been designed to give accurate, repeatable exposures for a wide variety of applications. They have been successfully field tested worldwide in microscopy, video imaging, PMT protection, and photographic applications. The VS14 shutter is offered in either cased or uncased configurations. The uncased shutter allows a high degree of flexibility when mounting the unit in applications where spatial limitations are a concern. The cased version offers the protection of a black anodized aluminum housing.
View our wide range of Shutters
View our portfolio of Imaging for Science and Industry products
See all products from our supplier Vincent Associates
Eigenschaften:
- Uniblitz ist Marktführer für Mikroskop-Fluoreszenzshutter
- Hohe Hitzebelastbarkeit bei HBO und XBO Lampen
- Aperturen von 14 bis 60 mm, typischerweise 25 mm für Mikroskope
- Extrem kurze Schaltzeiten, Torbreiten von < 10 ms
- Uniblitz liefert mechanische Adapter für alle gängigen Mikroskoptypen
- Einfache Installation zwischen Fluoreszenzlampengehäuse und Mikroskopstativ
- Auch zur Shutterung von Hellfeldlampen (Halogen) sowie Detektoren und
- CCD-Kameras geeignet. Adapter dazu auf Anfrage.
- Zur Shutterung von Laserlicht empfehlen wir die Uniblitz LS-Serie mit
- 2 bis 6 mm Apertur, welche direkt am Laserausgang installiert werden kann.
- Durch TTL-Steuerung in vielen Fällen direkt synchronisierbar mit CCD-Kameras
- und/oder deren Software.
Qseven Modul mit Intel® Atom™
Artikelnummer des Herstellers:
H6049
Hectronic
Beschreibung:
The H6049 is an extremely compact high-performance, ultra-low power COM module using the Intel® Atom™ Z510/530 CPU and the US15W embedded chipset with integrated graphics and media hardware acceleration. The module is based on the Qseven standard, for UMPC platforms, and is a legacy free module with the new serial interfaces and the latest display interfaces. The BIOS has support for legacy Super I/Os on the carrier board. Qseven modules are defined for low cost and ruggedness, with an edge card connector for MXMconnectors on the carrier board. H6049 has soldered memory, optional conformal coating and is available in extended/industrial temperature range.
View our wide range of Computer-on-Modules
View our portfolio of Embedded computing products
See all products from our supplier Hectronic
Eigenschaften:
- Intel® Atom™ Z510/Z530 CPUs
- Processor speeds: 1.1GHz, 1.6GHz
- Extended/Industrial Temperature, optional
- Soldered DDRII DRAM
- Onboard NANDrive Flash SSD
- 1 port for PCIe and 1 port for PCIe or 1Gbit Ethernet
- Trusted Platform Module, TPM 1.2
- LVDS, SDVO
- 7 x USB 2.0 Ports
- HD Audio
- RTC
- Conformal coating, optional
- Fully RoHS compliant
- Windows XP (embedded), XP Professional, Vista, Windows CE .NET and Linux supported
Intel® Atom™ basierend Qseven Modul
Artikelnummer des Herstellers:
H6055
Hectronic
Beschreibung:
The H6055 is an extremely compact (70 mm x 70 mm) high-performance, ultra-low power COM module based on the Intel® Atom™ E600 series CPUs and the Intel® Platform Controller Hub EG20T. The form factor is Qseven, and H6055 is compliant with revision 1.2 of the standard. The Qseven standard is defined for low cost and ruggedness. Qseven modules have an edge card MXM type connector for the carrier board connection. H6055 has soldered memory, optional conformal coating and is available in versions specified to operate in an industrial temperature range. Windows XP (embedded), Vista, Windows 7, CE 6.0 and Linux are supported.
View our wide range of Computer-on-Modules
View our portfolio of Embedded computing products
See all products from our supplier Hectronic
Eigenschaften:
- Intel® Atom™ E620(T)/E640(T)/E680(T) CPUs
- Processor speeds: 600MHz, 1GHz, 1,6GHz
- Standard and Industrial Temperature versions
- Soldered DDRII DRAM
- Onboard SATA NANDrive Flash SSD
- Trusted Platform Module, TPM 1.2
- HD Audio
- 3 x PCIe ports
- 1 x Gbit Ethernet
- 6 + 1 USB 2.0 Ports (1 port supports client mode)
- 1-2 x SATA II port
- 1 x CAN
- LVDS, SDVO
DC, AC and EC fans
Artikelnummer des Herstellers:
DC, AC and EC fans
AVC Europe
Beschreibung:
With the advance of modern technology, there is need to pack more performance into a smaller footprint. However, this has the side effect of increasing power density, and leads to an increasing demand for fan-cooling capacity and efficiency.
There is a constant pressure to deliver fans with higher performance and efficiency to ensure components run at their most optimum and provide undisturbed operation.
The quality and reliability of AVC’s fan products are tested by carrying out a series of tests such as high/low temperature running, thermal/mechanical shock, thermal cycling and vibration. Facilities for further testing such as acoustic level, sound quality, water, and corrosion resistance are available.
All AVC’s fan products are RoHS compliant, and they also offer 100% halogen free products.
See the catalogue below to see the wide range of fans AVC offers.
Zyla 4.2 PLUS sCMOS-Kamera
Artikelnummer des Herstellers:
Zyla 4.2 Plus
Andor Technology
Beschreibung:
Die Zyla 4.2 Plus von Andor Technology bietet die höchste verfügbare QE (82 %) im Bereich der sCMOS Technologie, verbunden mit extrem niedrigem Ausleserauschen (0,9 e-) und schnellen Bildraten (100 fps via Camerlink, 53 fps via USB3).
Die Zyla 4.2 Plus sCMOS Kamera eignet sich ideal mit ihren flexiblen Betriebsmodi (LightScan Plus) für Anwendungen wie beispielsweise jeder Art von Fluoreszenz-Bildgebung, Super-Resolution-Mikroskopie, Lichtschnittmikroskopie, Astronomie, Adaptive Optiken und viele mehr.
GPU Express - Die Andor GPU Express Bibliothek wurde zur Vereinfachung und Optimierung von Datenübertragungen zwischen der Kamera und CUDA-fähigen NVIDIA Graphical Processing Unit (GPU) Karten entwickelt. Durch Image-Processing auf der Graphik- Karte, wird die CPU des PCs erheblich entlastet, was sich bei Anwendungen wie z. B. Lichtschnittmikroskopie, Super-Resolution Mikroskopie und Adaptive Optik optimal nutzen lässt.
Betrachten Sie unsere große Auswahl an CCD/CMOS Kameras
Betrachten Sie unser Portfolio von Imaging-fur-Wissenschaft-und-Industrie
Betrachten Sie alle Produkte unseres LieferantenAndor technology
Laser Safety Shutter, Aperture 10mm
Artikelnummer des Herstellers:
ELS11
Apex
Beschreibung:
A laser control system is used to implement all security relevant aspects. Installation is simple and system cost is reduced. This system is designed for laser units controlled by pulse width modulation (PWM). The ELS11 laser shutter is equipped with 3 HAL sensors, one sensor signals shutter open, 2 sensors signal shutter closed. When the shutter is closed and laser is active, laser beam is deviated to a heat dump. If temperature increases above 65 °C, laser is shut down.
View our wide range of Laser Safety Shutter
View our portfolio of Photonics
See all products from our supplier Apex
Eigenschaften:
- Aperture: 10mm
- Operates in horizontal and vertical position
- Shutter dimension: 88 x 78m x 40.5 mm
- Sensor outputs source 24V/200mA each and are overload and short circuit protected
- Power consumption: Shutter 24VDC: open 110mA, closed 20mA
Laser Shutter Control Unit
Artikelnummer des Herstellers:
SLCU13DN
Apex
Beschreibung:
A laser control system is used to implement all security relevant aspects. Installation is simple and system cost is reduced. SLCU13DN FIRESTAR interconnection control unit is designed for laser units controlled by pulse width modulation (PWM).
View our wide range of Laser Safety Shutter
View our portfolio of Photonics
See all products from our supplier Apex
Eigenschaften:
- DIN rail unit 28mm wide
- Outputs are 24V DC current limited and short circuit protected
- PLC (SPS) inputs/outputs (+24V/GND)
- Laser enable by PLC / SPS control
- PWM drive ON/OFF by PLC/SPS
- 2 emergency-off contacts with cross-wire and short detection
- Power consumption: 24VDC / app. 100mA
iXon Ultra 897 back-illuminated EMCCD-Kamera
Artikelnummer des Herstellers:
DU-897U-CS0-BV
Andor Technology
Beschreibung:
Mit fundamental neuer elektronischer Plattform präsentiert sich die neue iXon Ultra EMCCD-Kamera von ANDOR Technologie. 17 MHz Taktrate erlauben eine erhöhte Bildrate von bis zu 56 Vollbildern/s, voll quantifizierbar mit direkter Ausgabe von Photoelektronen oder sogar der Anzahl detektierter Photonen pro Pixel (muss von Software unterstützt werden).
Durch maximale thermoelektrische Kühlung hinab auf –100°C und geringstem Clock-Induced-Charge-Verstärkerrauschen liefert die iXon Ultra eine ultimative Empfindlichkeit.
Einfache USB-Verbindung, mit der bereits die max. Bildrate verlustfrei übertragen wird und ein separater cameralink Port für schnelle on-the-fly-Algorithmen während der Bildaufnahme sorgen für hohe Flexibilität beim Einsatz dieser Kamera.
Betrachten Sie unsere große Auswahl an EMCCD-Kamera
Betrachten Sie unser Portfolio von Imaging für Wissenschaft und Industrie
Betrachten Sie alle Produkte unseres Lieferanten Andor Technology
Eigenschaften:
- 17 MHz Taktrate für 56 Vollbilder/s
- Neu! Centered Crop Mode – live Cell Super Resolution bei 569 fps
- Einzelphotonenempfindlichkeit
- Sonderbeschichtung EX2 für spektral breite Empfindlichkeit
- TE Kühlung auf -100°C
- Unterdrückung des Etalon-Effekts bei >700nm (fringing), optional
- 512x512 aktive Pixel
- Bildraten: 56 -11074 fps (ROI)
- Ausleserauschen < 1e mit EM-Gain
- Quanteneffizienz QE max: > 90%
Konfokal-Drehscheibe
Artikelnummer des Herstellers:
LIFA Confocal Spinning disk
Lambert Instruments
Beschreibung:
The combination of the LIFA with the renowned Yokogawa CSU-X1 multibeam confocal spinning disk provides fast confocal FLIM in the frequency domain. The system delivers the high depth resolution lifetime imaging often requires, e.g. in sub-cellular lifetime studies, and removes the out-of-focus light.
The CSU unit is mounted between the microscope and the TRiCAM modulated ICCD camera is mounted to the camera port of the spinning disk. For excitation Lambert Instruments provides the modulated Multi-LASER.
The CSU unit has been succesfully tested on Leica®, Nikon®, Olympus® and Zeiss® microscopes. We offer the system as a complete CSU-X1 confocal FLIM package or as a LIFA FLIM upgrade to an existing CSU.
The Lambert Instruments LIFA is easy to install - within the hour - and easy to operate. It is particularly well suited for high-content screening applications. The LIFA system has been judged "easy and highly quantitative" for a.o. FLIM-FRET studies.
View our wide range of Bio-imaging products
View our portfolio of Imaging for Science and Industry products
See all products from our supplier Lambert Instruments
Eigenschaften:
- Hardware features:
- Multi-beam fast FLIM, up to two lifetime images per second
- Non-phototoxic illumination offered by the new Laser Box
- Lifetime sensitivity 0-300 ns
- Lifetime accuracy 50 ps r.m.s.
- High quantum efficiency with the optional Gen III GaAs intensifier
- Software features:
- Time-lapses
- FRET efficiency mapping
- Multi-frequency acquisition and analysis for separation of multiple lifetimes
- Polar (Phasor) plot inspection and separation of multiple lifetimes
- Easy integration into specialized image analysis pipelines
pE-2 4-Wege LED Fluoreszenzanregung
Artikelnummer des Herstellers:
pE-2
CoolLED
Beschreibung:
The pE-2 LED excitation system is designed for use on all current epi-fluorescent microscopes. It provides stable, controllable and intense light. The Main Unit can drive up to 4 LED wavelengths. It is a modular product which uses LAMs (LED Array Modules) selected from our wide range of LED wavelengths. These LAMs can be interchanged by the user so that different wavelengths can be excited depending on the application.
View our wide range of Bio-imaging products
View our portfolio of Imaging for Science and Industry products
See all products from our supplier CoolLED
Eigenschaften:
- Modular system which drives up to 4 wavelengths
- Switch on and off instantly
- Adjust light intensity in 1% steps (0-100%)
- Stable, repeatable light intensity
- LEDs last for tens of thousands of hours
- Wide range of LED wavelengths available
- Integrated with many imaging software packages
- Quiet and cool operation
- pE-2 collimator with exchangeable dichroic mirror for full flexibility
- Accepts excitation filters for fast-switching applications
OptoSplit II Zwei-Wege Bildteiler
Artikelnummer des Herstellers:
OptoSplit II Image Splitter
Cairn Research
Beschreibung:
The Cairn Optosplit image splitter is a simple device enabling a single camera to record images simultaneously at two different optical wavelengths.
View our wide range of Bio-imaging products
View our portfolio of Imaging for Science and Industry products
See all products from our supplier Cairn Research
Eigenschaften:
- Compact design with integral C-mount input and output ports
- Simple and precise controls for image registration
- Interchangeable filter/dichroic holders for dual and single wavelength imaging
- Aperture diaphragms including Optomask to balance signal levels if appropriate
- Choice of magnification
- Rotating filter mount for polarisation studies (see image)
- New LS version available for large sensor formats
Laserschutzbrillen von Honeywell
Artikelnummer des Herstellers:
Laserschutzbrillen von Honeywell
Honeywell - HMI
Beschreibung:
Die Fassungen von Honeywell sehen modisch aus und dank eingebauten Features bieten die Brillen großen Tragekomfort. Wenn Sie die Brillen mit der großen Auswahl an Laserfilter von Honeywell kombinieren, erhalten Sie ein Produkt mit eingebautem Schutz, guter Sicht, Komfort und Stil. Bei der Auswahl einer geeigneten Gestellart, sollten Sie Anforderungen wie z.B. die Einstellbarkeit, Komfort, die Notwendigkeit einer Korrektionsfassung beachten. Berücksichtigen Sie neben dem Gewicht, auch den Stil, da dieser einen großen Einfluss auf die Gewichtsverteilung und den Komfort hat, und eine große Rolle dabei spielt, dass sie sich wohlfühlen.Untenstehend finden Sie unsere verschiedenen Gestellarten.
.
Betrachten Sie unsere große Auswahl an Laser Schutz Produkte
Betrachten Sie unser Portfolio von Photonik
Betrachten Sie alle Produkte unseres Lieferanten Honeywell - HMI
HiCAM 500 Intensivierte Hochgeschwindigkeits-Kamera
Artikelnummer des Herstellers:
HiCAM 500
Lambert Instruments
Beschreibung:
The HiCAM 500 is a very senstive gated intensified high-speed camera. It has an integrated fiber-optically coupled image intensifier, which offers a unique combination of high speed and sensitivity down to single photon level. Because the HiCAM does not need high intensity light sources, it is suitable for use in low-light level conditions. The HiCAM can record up to 200,000 frames per second.
The dual stage image intensifier, specially designed for high-speed cameras, can be equipped with a variety of photocathodes; ranging from ultra violet to infra red. Adapting the photocathode will give maximum output brightness to enhance Signal to Noise Ratio (SNR). Moreover, the image intensifier is fiber-optically coupled to a CMOS sensor. This further increases SNR, as compared to a lens-coupled system.
View our wide range of High Speed Visible Camera products
View our portfolio of Imaging for Science and Industry products
See all products from our supplier Lambert Instruments
Eigenschaften:
- 1280 x 1024 square pixels
- 2-stage (dual stage) image intensifier
- 100.000 fps max. recording rate
- Up to 16Gbyte internal memory
- Up to 26 seconds recording time @500fps and max. resolution
- Minimum exposure 40ns, optional 3ns Minimum exposure 40ns, optional 3ns
- Sensitivity 0.0001 lux Sensitivity 0.0001 lux
- GigE PC connection GigE PC connection
- C-mount or F-mount input C-mount or F-mount input
- Software for camera / image intensifier control, image viewing and storage
Axiallüfter mit Luftkanal, Wärmeschutz, E-Flügelrad
Artikelnummer des Herstellers:
F6025E24B-RH
Dongyang
Beschreibung:
View our wide range of Fans
View our portfolio of Thermal Products
See all products from our supplier Dongyang
Sinuswellen/CMOS-zu-LVPECL-Puffer/-Teiler für niedriges Phasenrauschen, SON 8
Artikelnummer des Herstellers:
AZP63QG
Arizona Microtek
Beschreibung:
The AZP63 is a sine wave/CMOS to LVPECL buffer/divider optimized for very low phase noise (-165dBc/Hz). It is particularly useful in converting crystal or SAW based oscillators into LVPECL outputs for greater than 1GHz of bandwidth.
The AZP63 is one of a family of parts that provide options of fixed ÷1, fixed ÷2 and selectable ÷1, ÷2 modes as well as active high enable or active low enable to oscillator designers.
View our wide range of Digital products
View our portfolio of Semiconductors
See all products from our supplier Arizona Microtek
Eigenschaften:
- LVPECL outputs optimized for very low phase noise (-165dBc/Hz)
- High bandwidth, > 1GHz
- Selectable ÷1, ÷2 output
- Selectable Enable logic
- 3.0V to 3.6V operation
Differenzial-PECL-zu-CMOS/TTL-Umsetzer, 8-poliges SOIC-Gehäuse
Artikelnummer des Herstellers:
AZ100ELT21DG
Arizona Microtek
Beschreibung:
The AZ100ELT21 is a differential PECL to CMOS/TTL translator. Because PECL (Positive ECL) levels are used, only VCC and ground are required. The small outline 8-lead packaging and the single gate of the ELT21 makes it ideal for those applications where space, performance and low power are at a premium.
The ELT21 provides a VBB output for single-ended use or a DC bias reference for AC coupling to the device.
For single-ended input applications, the VBB reference should be connected to one side of the D0/NOT D0 differential input pair. The input signal is then fed to the other D0/NOT D0 input. The VBB pin should be used only as a bias for the ELT21 as its sink/source capability is limited. When used, the VBB pin should be bypassed to ground via a 0.01µF capacitor
View our wide range of Digital products
View our portfolio of Semiconductors
See all products from our supplier Arizona Microtek
Eigenschaften:
- Green / RoHS Compliant / Lead (Pb) Free Package Available
- 3.5ns Typical Propagation Delay
- Differential PECL Inputs
- CMOS/TTL Outputs
- Flow Through Pinouts
- Operating Range of 3.0V to 5.5V
- Direct Replacement for ON Semiconductor MC100ELT21
Differenzial-PECL-zu-CMOS/TTL-Umsetzer, 8-poliges MSOP-Gehäuse
Artikelnummer des Herstellers:
AZ100ELT21T
Arizona Microtek
Beschreibung:
The AZ100ELT21 is a differential PECL to CMOS/TTL translator. Because PECL (Positive ECL) levels are used, only VCC and ground are required. The small outline 8-lead packaging and the single gate of the ELT21 makes it ideal for those applications where space, performance and low power are at a premium.
The ELT21 provides a VBB output for single-ended use or a DC bias reference for AC coupling to the device.
For single-ended input applications, the VBB reference should be connected to one side of the D0/NOT D0 differential input pair. The input signal is then fed to the other D0/NOT D0 input. The VBB pin should be used only as a bias for the ELT21 as its sink/source capability is limited. When used, the VBB pin should be bypassed to ground via a 0.01µF capacitor
View our wide range of Digital products
View our portfolio of Semiconductors
See all products from our supplier Arizona Microtek
Eigenschaften:
- Green / RoHS Compliant / Lead (Pb) Free Package Available
- 3.5ns Typical Propagation Delay
- Differential PECL Inputs
- CMOS/TTL Outputs
- Flow Through Pinouts
- Operating Range of 3.0V to 5.5V
- Direct Replacement for ON Semiconductor MC100ELT21
Faktor 16, 32 Taktgenerator mit Phasenregelkreis
Artikelnummer des Herstellers:
AZ12010BLG
Arizona Microtek
Beschreibung:
The AZ12010 contains all of the functional elements necessary to implement a Phase-Locked Loop for clock multiplication at frequencies up to 800 MHz. A fixed 32 times multiplication allows the use of low cost crystals or a low frequency reference signal. The output can be divided by two for 16 times net multiplication. The VCSO is differentially or single-ended driven using the chip CML SAW outputs. The dynamic properties of the PLL are under the control of the user through selection of the desired external components.
View our wide range of Digital products
View our portfolio of Semiconductors
See all products from our supplier Arizona Microtek
Eigenschaften:
- Differential Inputs/Outputs for External Voltage Controlled SAW Oscillator
- Optional Internal Crystal Oscillator Driver
- Internal Edge-Matching Phase/Frequency Detector
- Internal Charge-Pump/Integrator Amplifier
- RF Bipolar Design for Low Phase Noise
- Available in a 3x3 mm MLP Package