Geringe Leistungsaufnahme, Flacher ± 2 g Doppelachsen-Beschleunigungsmesser mit I2C-Schnittstelle
Artikelnummer des Herstellers :
The MXC6232xX is low cost, dual axis accelerometers fabricated on a standard, submicron CMOS process. It is a complete sensing system with on-chip mixed signal processing and integrated I2C bus, allowing the device to be connected directly to a microprocessor eliminating the need for A/D converters or timing resources. The MXC6232xX measures acceleration with a full-scale range of ±2 g and a sensitivity of 512counts/g @3.0 V at 25°C. It can measure both dynamic acceleration (e.g. vibration) and static acceleration (e.g. gravity). The MXC6232xX design is based on heat convection and requires no solid proof mass.
This design eliminates the stiction problems associated with legacy technologies and provides shock survival greater than 50,000g's. Memsic's solid state design leads to significantly lower failure rates in customer applications and lower loss due to handling during manufacturing and assembly processes It is packaged in a small low profile LCC surface mount package (5.5mm x 5.5mm x 1.4mm with a maximum height of 1.5mm) and is available for operating temperature ranges of -40°C to +85°C.
The MXC6232xX provides I2C digital output with 400 KHz, fast mode operation. The maximum noise floor is 1 mg/ √Hz allowing signals below 1mg to be resolved at 1 Hz bandwidth.
View our wide range of Accelerometers
View our portfolio of Sensors
See all products from our supplier Memsic
Preis und Verfügbarkeit
Fragen Sie unsere Experten
- RoHS compliant
- I²C Slave, FAST (≤400 KHz.) mode interface
- 1.8V compatible IO
- Small low profile package: 5.5mm x 5.5mm x
- Embedded Power up/down and self-test feature
- On-chip temperature sensor available
- Eight customer defined 7-bit addresses
- 2.7 V to 3.6 V single supply continuous operation
- Lower power consumption: typically <2mA @3V
- >50,000g shock survival rating.
- Resolution better than 1mg