High Power Detector, Water-cooled Thermopile, up to 10kW, 60 mm Ø, USB Output

Manufacturer's part number :


Manufacturer Gentec


Description :

The gold reflector cone of the HP60A-10KW-GD is specifically designed to handle the high intensities of very small beams. By reflecting the incident light on the sides of the aperture, the cone effectively spreads the intensity on a larger area, thus raising the damage threshold to 10 kW/cm2 @ the full power (10 kW). Also features a USB ouput for direct measurements on a PC.

This HP high power detector is compatible with MAESTRO, M-LINK, TUNER, UNO, S-LINK, P-LINK monitors.

View our wide range of Laser power meter and Laser Energy meter

View our portfolio of Photonics

See all products from our supplier Gentec



  • Quote and availability


  • Spectral Range: 0.8 - 12 μm
  • Cone reflector High damage threshold absorber
  • Max average power: 10kW
  • Max average Power density: less than 35 mm Ø 10 kW/cm2² at 1064 nm, 1.07-1.08 μm and 10.6 μmW
  • Water Cooling method
  • Noise Equivalent Power: 300W
  • Diameter Aperture: 60 mm
  • Dimensions: 127H x 127W x 90D mm
  • Each head comes with both a DB-15 connector for use with a Gentec-EO monitor and a USB2.0 output for direct connection to a PC
  • Benefits

  • Less sensitive to variations in water cooling temperature than any other high power water-cooled meter on the market
Features Similar products
Sensor Type Thermopile  

  similar products found

Search similar products
Meter type MAESTRO Digital-Colour LCD  
TUNER Handheld-Digital tuning  
UNO Handheld-Digital  
M-LINK PC-based USB  
S-LINK PC-based USB/Ethernet  
P-LINK PC-based USB/RS232/Ethernet  
Spectral Range UV (150-400nm)  
VIS (400-700nm)  
NIR (750nm-3µm)  
MIR (3-30µm)  
Operating Mode CW  
Max. Average Power >10kW  
Aperture Dimensions (mm) ø60