You are currently viewing New and featured

Displaying 1-20 (of 155 products)  

Single axis, MEMS, analogue accelerometer

MS1000

MPN:

MS1000 series

Manufacturer L3 Communications

Safran Colibrys

Description:

Designed to address advanced inertial applications up to tactical grade, the MS1000 implements innovative micro-electromechanical design and electronics which unleash unbeatable performance with regard to long term bias and scale factor repeatability, in-run bias stability, and vibration rectification error (VRE) in a dynamic range from ±2g to ±100g. Thanks to this new accelerometer, MEMS technology is now able to address new applications, which have never been served before via this technology.

Each sensor embeds a one-axis capacitive bulk MEMS die and integrated circuit with signal conditionning and differential analog +/- 2.7V output, built-in-self test and temperature sensor for compensation. With the same small form factor LCC20 hermetically sealed package, the MS1000 has the similar size to the MS9000.

Features:

  • Long-term bias repeatability: 1.2 mg (+/- 10 g, typ.)
  • In-run bias stability (Allan Variance @ 10 s): 15 μg
  • Noise in band: 34 μg√Hz (+/- 10 g, typ.)
  • Non linearity (IEEE Norm, % of full scale) : 0.3 %

  • Applications
  • Aerospace and defence
  • Naval, land and railway
  • Advanced drilling

Expandable, fanless embedded computer with 6th Gen Intel® Core™ processor, 1 PCIe x16 + 3 PCI (MVP-6010) or 2 PCIe x16 + 2 PCI (MVP-6020)

MVP-6010 / 6020 series

MPN:

MVP-6010 / 6020 series

Manufacturer L3 Communications

ADLINK

Description:

The MVP-6010/6020 series value line of fanless embedded computing platforms, incorporating the 6th Generation Intel® Core™ processor, provides one PCIex16 and three PCI or two PCIex16 and two PCI expansion slots, 1 mini PCIe slot and single-side access for I/O ports, optimizing easy maintenance in industrial automation environments. The series retains the robust design of all ADLINK MXC/MXE lines, at a new extremely cost-effective price point.

The MVP-6010/6020 series supports dual-channel DDR4 memory for more powerful computing and the Intel® HD Graphics 530 speeds graphics performance. Along with a versatile I/O array and flexible expansion capacity, the MVP-6010/6020 Series fully satisfies all the needs of industrial automation with the performance demanded by vision inspection, motion control, and surveillance applications. Fanless construction not only overcomes contaminant and noise challenges presented by harsh IA environments, the elimination of problematic structural elements that negatively affect MTBF greatly increases life cycle expectations for the platform. 

Features:

  • 6th Generation Intel® Core™ i7/i5/i3 Skylake FCLGA1151 processor + H110 (MVP-6010)/ Q170 (MVP-6020) chipset
  • Dual-channel DDR4 SO-DIMM sockets support up to 32 GB memory
  • 1 PCIex16 and 3 PCI (MVP-6010)/ 2 PCIex16 and 2 PCI (MVP-6020) expansion slots available, supporting Gen3 PCIe cards
  • Support for 2 independent displays with on-board 2x DisplayPort, 1x DVI-D, and 1x VGA ports onboard
  • 6 External USB ports (4x USB 3.0, 2x USB 2.0), 1 internal USB 2.0 port
  • 3 Intel GbE ports with teaming function
  • Built-in 8CH DI and 8CH DO, 2 software-programmable RS-232/422/485 + 2 RS-232 ports
  • Fanless operation from 0°C to 50°C (with 35W CPU), and 0°C to 40°C (with 65W CPU)

2x6 SFF transceiver, SC-RJ connector, 1 mm POF and 200 μm HCS, Tx squelch

CT-0125NPF-R41C-E / NSQ

MPN:

CT-0125NPF-R41C-E

Manufacturer L3 Communications

Coretek

Description:

The CT-0125NPF-R41C-E series from Coretek Opto Corp. are the high performance and cost-effective modules for serial optical data communication applications specified for data rates of 125 Mb/s. It operates with +3.3 V power supply. The module is intended for multi-mode fibre, operates at a nominal wavelength of 650 nm and complies with Multi-Source Agreement (MSA) Small Form Factor (SFF) 2x6 foot print.

Each module consists of a transmitter optical subassembly, a receiver optical subassembly and an electrical subassembly. All of them are housed in a plastic package and the combination produces a reliable component. The module is a transceiver with SC-RJ connector designed for use in Fast Ethernet (100 Mb/s) or Ethernet (10 Mb/s) over 50 metres POF and 100 metres HCS fibre.

Features:

  • 650 nm LED
  • Multi-rate: 10-125 Mb/s, NRZ
  • Single +3.3 V power supply
  • RoHS compliant and lead-free
  • PECL differential electrical interface
  • Compliant with multi-source agreement (MSA) small form factor (SFF) 2x6 footprint
  • SC-RJ connector
  • TX optical output power squelch enabled
  • Compliant with SFF-8472 digital diagnostic monitoring interface
  • Eye safety – designed to meet LED Class 1

  • Applications
  • Fast ethernet
  • FDDI
  • Multi-mode fibre links
  • Optical-electrical interface conversion

2x6 SFF transceiver, SC-RJ connector, 1 mm POF and 200 μm HCS, Tx squelch disabled

CT-0125NPF-R41C-E / NSQ

MPN:

CT-0125NPF-R41C-E NSQ

Manufacturer L3 Communications

Coretek

Description:

The CT-0125NPF-R41C-E NSQ from Coretek Opto Corp. is the high performance and cost-effective module for serial optical data communication applications specified for data rates of 125 Mb/s. It operates with +3.3 V power supply. The module is intended for multi-mode fibre, operates at a nominal wavelength of 650 nm and complies with Multi-Source Agreement (MSA) Small Form Factor (SFF) 2x6 foot print.

Each module consists of a transmitter optical subassembly, a receiver optical subassembly and an electrical subassembly. All of them are housed in a plastic package and the combination produces a reliable component. The module is a transceiver with SC-RJ connector designed for use in Fast Ethernet (100 Mb/s) or Ethernet (10 Mb/s) over 50 metres POF and 100 metres HCS fibre.

Features:

  • 650 nm LED
  • Multi-rate: 10-125 Mb/s, NRZ
  • Single +3.3 V power supply
  • RoHS compliant and lead-free
  • PECL differential electrical interface
  • Compliant with multi-source agreement (MSA) small form factor (SFF) 2x6 footprint
  • SC-RJ connector
  • TX optical output power squelch disabled
  • Compliant with SFF-8472 digital diagnostic monitoring interface
  • Eye safety – designed to meet LED Class 1

  • Applications
  • Fast ethernet
  • FDDI
  • Multi-mode fibre links
  • Optical-electrical interface conversion

High-performance, compact and reliable NIR spectral sensor

Nirone Sensor

MPN:

NIRONE SENSOR

Manufacturer L3 Communications

Spectral Engines

Description:

Spectral Engines’ NIRONE SENSOR uses patented Micro Electro Mechanical System (MEMS) Fabry-Perot Interferometer enabling fast and reliable measurements even in the most demanding environments. The sensors work at the true near infrared (NIR) spectral range from 1350 to 2450 nm which means better sensitivity and specificity in material sensing applications. They offer excellent performance fully comparable to the best laboratory instruments in a small package and only a fraction of the cost.

The NIRONE SENSOR is designed for system integrators for creating leading-edge products based on our smart NIR sensor platform. It includes two integrated light sources, NIR sensor, read-out and driving electronics and built-in intelligence, which guarantees extremely stable output even for the most demanding industrial or consumer applications. The sensors can easily be adapted to your measurement needs with suitable front optics. A single electrical connector (I2C communication) makes the sensor easy to integrate into your own electronics, whenever needed.

Features:

  • High-tech spectrometer features integrated into a small package
  • Modular design makes it easy to integrate in all designs
  • True near-infrared means better sensitivity and specificity

Complete spectral sensing device for fast testing and application development

Nirone Device

MPN:

NIRONE DEVICE

Manufacturer L3 Communications

Spectral Engines

Description:

Spectral Engines’ NIRONE DEVICE provides a more complete material sensing solution in an integrated package. The heart of the system is the NIRONE SENSOR with added mobility and connectivity. The battery-powered NIRONE DEVICE has Bluetooth connectivity enabling communication with portable devices such as mobile phones and tablets. The micro-USB connection is used for charging and communication with SensorControl software.

The NIRONE DEVICE has been designed for application developers for faster prototyping or final product development. With these advanced devices you can very easily finish developing your application and complete your measurements in an actual environment.

Features:

  • Laboratory analyser performance to field measurements
  • Programmable for any application
  • Robust mobility and connectivity

Shock- and vibration-resistant pressure switch

Eurosensor VPS100A

MPN:

VPS100A

Manufacturer L3 Communications

Eurosensor

Description:

This durable and ultra-sensitive VPS100A series pressure switch incorporates a patented dual diaphragm / dual contact design offering protection against false actuation due to shock and vibration. Fitted with an AMP Superseal connector for straightforward installation, the switch features a teflon diaphragm, IP67 protection and an extended temperature range.

Features:

  • Excellent shock and vibration resistance
  • Miniature size, lightweight, low cost
  • Quick response time
  • -40 to 90°C operating temperature
  • IP67 protection
  • AMP Superseal 2-pin connector
  • Dependable long life (20+ million cycles)

Integrated environmental sensor for gas, pressure, humidity and temperature

Bosch-Sensortec BME680 Pressure-Gas-Humidity-Temperature Sensor

MPN:

BME680

Manufacturer L3 Communications

Bosch Sensortec

Description:

The BME680 is an integrated environmental sensor developed specifically for mobile applications and wearables where size and low power consumption are key requirements. the BME680 integrates for the first time individual high linearity and high accuracy sensors for gas, pressure, humidity and temperature. It consists of an 8-pin metal-lid 3.0 x 3.0 x 0.95 mm³ LGA package which is designed for optimized consumption depending on the specific operating mode, long term stability and high EMC robustness.

The gas sensor within the BME680 can detect a broad range of gases to measure indoor air quality for personal well being. Gases that can be detected by the BME680 include Volatile Organic Compounds (VOC) from paints (such as formaldehyde), lacquers, paint strippers, cleaning supplies, furnishings, office equipment, glues, adhesives and alcohol.

View our portfolio of Sensors

See all products from our supplier Bosch Sensortec

Features:

  • Applications:

  • Indoor air quality measurement
  • Personalised weather station
  • Context awareness, eg skin moisture detection, room change detection
  • Fitness monitoring / well-being
  • Warning regarding dryness or high temperatures
  • Measurement of volume and air flow
  • Home automation control (eg HVAC)
  • GPS enhancement (eg time-to-first-fix improvement, dead reckoning, slope detection)
  • Indoor navigation (change of floor detection, elevator detection)
  • Altitude tracking and calories expenditure for sports activities

Push button switch, 47 series, round, panel sealed, IP67, various button colours

ITW 47 series push button switches

MPN:

47 series

Manufacturer L3 Communications

ITW

Description:

The 47 series is a uniquely designed sealed miniature push button switch. The silicone button and body can be panel mounted and terminated with a standard connector or mounted in a PC board.

The switches come in two levels of sealing: a panel sealed only version and a fully sealed version with epoxy sealed base. Both meet IP67 requirements. The buttons are available in black, red, green, white, yellow, blue and orange. See below for full list of part numbers.

Features:

  • Sealed to IP67
  • Small size
  • 7 button colours
  • PC terminals (connector available)
  • Long life
  • Low cost

  • Typical applications
  • Marine equipment
  • Medical equipment
  • Outdoor controls
  • Food processing equipment
  • Appliances
  • Recreational vehicles

Push button switch, 88 series, chrome, momentary, centre spot illuminated, green, silver contact

ITW 88/89 series push button switches

MPN:

S88-111G

Manufacturer L3 Communications

ITW

Description:

This rugged multi-option push button series offers the utmost in choices of mounting styles, colours, terminations, lighting and momentary switching. The 88/89 series offers all these options in one compact package size.

Features:

  • Circuit: 1NO
  • Momentary action
  • Waterproof switch
  • Long life
  • Low cost
  • Variety of LED colours
  • Electro-mechanical
  • RoHS-compliant
  • Silver plated contact and terminals

  • Applications
  • Kiosks
  • Security equipment
  • Medical equipment
  • Transportation (mass-transit, lift)
  • Marine
  • Military equipment
  • IPC
  • POS

Push button switch, 88 series, chrome, momentary, centre spot illuminated, red / green, silver contact

ITW 88/89 series push button switches

MPN:

S88-511RG

Manufacturer L3 Communications

ITW

Description:

This rugged multi-option push button series offers the utmost in choices of mounting styles, colours, terminations, lighting and momentary switching. The 88/89 series offers all these options in one compact package size.

Features:

  • Circuit: 1NO
  • Momentary action
  • Waterproof switch
  • Long life
  • Low cost
  • Variety of LED colours
  • Electro-mechanical
  • RoHS-compliant
  • Silver plated contact and terminals

  • Applications
  • Kiosks
  • Security equipment
  • Medical equipment
  • Transportation (mass-transit, lift)
  • Marine
  • Military equipment
  • IPC
  • POS

Push button switch, 88 series, chrome, momentary, centre spot illuminated, white, silver contact

ITW 88/89 series push button switches

MPN:

S88-A11W

Manufacturer L3 Communications

ITW

Description:

This rugged multi-option push button series offers the utmost in choices of mounting styles, colours, terminations, lighting and momentary switching. The 88/89 series offers all these options in one compact package size.

Features:

  • Circuit: 1NO
  • Momentary action
  • Waterproof switch
  • Long life
  • Low cost
  • Variety of LED colours
  • Electro-mechanical
  • RoHS-compliant
  • Silver plated contact and terminals

  • Applications
  • Kiosks
  • Security equipment
  • Medical equipment
  • Transportation (mass-transit, lift)
  • Marine
  • Military equipment
  • IPC
  • POS

Push button switch, 88 series, chrome, momentary, centre spot illuminated, green, gold contact

ITW 88/89 series push button switches

MPN:

88-111G

Manufacturer L3 Communications

ITW

Description:

This rugged multi-option push button series offers the utmost in choices of mounting styles, colours, terminations, lighting and momentary switching. The 88/89 series offers all these options in one compact package size.

Features:

  • Circuit: 1NO
  • Momentary action
  • Waterproof switch
  • Long life
  • Low cost
  • Variety of LED colours
  • Electro-mechanical
  • RoHS-compliant
  • Silver plated contact and terminals

  • Applications
  • Kiosks
  • Security equipment
  • Medical equipment
  • Transportation (mass-transit, lift)
  • Marine
  • Military equipment
  • IPC
  • POS

Push button switch, 88 series, chrome, momentary, centre spot illuminated, blue, gold contact

ITW 88/89 series push button switches

MPN:

88-511B

Manufacturer L3 Communications

ITW

Description:

This rugged multi-option push button series offers the utmost in choices of mounting styles, colours, terminations, lighting and momentary switching. The 88/89 series offers all these options in one compact package size.

Features:

  • Circuit: 1NO
  • Momentary action
  • Waterproof switch
  • Long life
  • Low cost
  • Variety of LED colours
  • Electro-mechanical
  • RoHS-compliant
  • Silver plated contact and terminals

  • Applications
  • Kiosks
  • Security equipment
  • Medical equipment
  • Transportation (mass-transit, lift)
  • Marine
  • Military equipment
  • IPC
  • POS

Push button switch, 88 series, chrome, momentary, centre spot illuminated, white, gold contact

ITW 88/89 series push button switches

MPN:

88-A11W

Manufacturer L3 Communications

ITW

Description:

This rugged multi-option push button series offers the utmost in choices of mounting styles, colours, terminations, lighting and momentary switching. The 88/89 series offers all these options in one compact package size.

Features:

  • Circuit: 1NO
  • Momentary action
  • Waterproof switch
  • Long life
  • Low cost
  • Variety of LED colours
  • Electro-mechanical
  • RoHS-compliant
  • Silver plated contact and terminals

  • Applications
  • Kiosks
  • Security equipment
  • Medical equipment
  • Transportation (mass-transit, lift)
  • Marine
  • Military equipment
  • IPC
  • POS

Push button switch, 89 series, chrome, momentary, no illumination, gold contact

ITW 88/89 series push button switches

MPN:

89L-110N

Manufacturer L3 Communications

ITW

Description:

This rugged multi-option push button series offers the utmost in choices of mounting styles, colours, terminations, lighting and momentary switching. The 88/89 series offers all these options in one compact package size.

Features:

  • Circuit: 1NO
  • Momentary action
  • Waterproof switch
  • Long life
  • Low cost
  • Variety of LED colours
  • Electro-mechanical
  • RoHS-compliant
  • Silver plated contact and terminals

  • Applications
  • Kiosks
  • Security equipment
  • Medical equipment
  • Transportation (mass-transit, lift)
  • Marine
  • Military equipment
  • IPC
  • POS

Push button switch, 89 series, chrome, momentary, red / green, gold contact, ring illumination

ITW 88/89 series push button switches

MPN:

89L-112RG

Manufacturer L3 Communications

ITW

Description:

This rugged multi-option push button series offers the utmost in choices of mounting styles, colours, terminations, lighting and momentary switching. The 88/89 series offers all these options in one compact package size.

Features:

  • Circuit: 1NO
  • Momentary action
  • Waterproof switch
  • Long life
  • Low cost
  • Variety of LED colours
  • Electro-mechanical
  • RoHS-compliant
  • Silver plated contact and terminals

  • Applications
  • Kiosks
  • Security equipment
  • Medical equipment
  • Transportation (mass-transit, lift)
  • Marine
  • Military equipment
  • IPC
  • POS

Push button switch, 89 series, chrome, momentary, red / green, gold contact, power illumination

ITW 88/89 series push button switches

MPN:

89L-113RG

Manufacturer L3 Communications

ITW

Description:

This rugged multi-option push button series offers the utmost in choices of mounting styles, colours, terminations, lighting and momentary switching. The 88/89 series offers all these options in one compact package size.

Features:

  • Circuit: 1NO
  • Momentary action
  • Waterproof switch
  • Long life
  • Low cost
  • Variety of LED colours
  • Electro-mechanical
  • RoHS-compliant
  • Silver plated contact and terminals

  • Applications
  • Kiosks
  • Security equipment
  • Medical equipment
  • Transportation (mass-transit, lift)
  • Marine
  • Military equipment
  • IPC
  • POS

Push button switch, 89 series, chrome, momentary, no illumination, gold contact, wirelead

ITW 88/89 series push button switches

MPN:

89L-A110N

Manufacturer L3 Communications

ITW

Description:

This rugged multi-option push button series offers the utmost in choices of mounting styles, colours, terminations, lighting and momentary switching. The 88/89 series offers all these options in one compact package size.

Features:

  • Circuit: 1NO
  • Momentary action
  • Waterproof switch
  • Long life
  • Low cost
  • Variety of LED colours
  • Electro-mechanical
  • RoHS-compliant
  • Silver plated contact and terminals

  • Applications
  • Kiosks
  • Security equipment
  • Medical equipment
  • Transportation (mass-transit, lift)
  • Marine
  • Military equipment
  • IPC
  • POS

Push button switch, 89 series, chrome, momentary, white, gold contact, wirelead, ring illumination

ITW 88/89 series push button switches

MPN:

89L-A12W24

Manufacturer L3 Communications

ITW

Description:

This rugged multi-option push button series offers the utmost in choices of mounting styles, colours, terminations, lighting and momentary switching. The 88/89 series offers all these options in one compact package size.

Features:

  • Circuit: 1NO
  • Momentary action
  • Waterproof switch
  • Long life
  • Low cost
  • Variety of LED colours
  • Electro-mechanical
  • RoHS-compliant
  • Silver plated contact and terminals

  • Applications
  • Kiosks
  • Security equipment
  • Medical equipment
  • Transportation (mass-transit, lift)
  • Marine
  • Military equipment
  • IPC
  • POS

Displaying 1-20 (of 155 products)  

Download our full list of suppliers

What do you need? Request a quote online today

Join our newsletter and receive the latest industry news and technology updates

Stay up to date and follow us on LinkedIn

Do you need Amphenol 608 connectors?