EDAC E-seal IP67 certified connectors now available from Acal BFi

EDAC E-seal connectors

Acal BFi have been partnered with EDAC for 2 years. We are proud to announce that we are now selling the EDAC IP67 certified E-Seal connectors. The Waterproof wire-to-wire and wire-to-PCB connectors have the adaptability to suit a wide variety of our supplied industries, including industrial, transport, medical and military. The new EDAC series of connectors, 560 and 572, protect against dirt, dust and water up to 1m depth for up to 30 minutes.



560 Series IP67

EDAC 560 Series E-seal connectors

The 560 Series is IP67 certified and suited well to environments where high vibration can be expected. It is available in wire-to-wire and wire-to-PCB formats, with a rating to 3 A at 250 V. The connector can be ordered with 2, 3 and 5 contact positions, on a 2.5 mm pitch. The optional waterproofing caps that can fill unused contact cavities, which together with preinstalled seals provide a reliable waterproofing capability. The range utilises crimp contacts, which are available in 2 wire sizes, also used in the 565 range, alongside supporting hand tooling and semi-auto tooling to ensure secure crimping. The housing contains a contact retention system that stops accidental damage during the preparation and installation of wires. For full IP67 protection an audible click will indicate that the required compression to the wire gasket seals has occurred.

Key features

  • IP67 certified
  • Available in wire-to-wire and wire-to-PCB formats
  • Rating to 3 A at 250 V
  • Available with 2, 3 and 5 contact positions
  • 2.5 mm pitch
  • Waterproofing seals available in Ø1.0 to Ø1.3 mm and Ø1.3 to Ø1.7 mm
  • Crimp contacts available in 22-22 AWG and 22-28 AWG
  • Hand tooling and semi-auto tooling available
  • Can operate in temperatures between -40°C to +105°C
  • Housings are available in blue or white
  • Tooling also suitable for the 566, 567, 568 and 572 product range
  • Double latching




572 Series IP67

EDAC 572 Series E-seal connectors

The IP67 approved 572 Series has double latching to provide a stronger fit, making it perfect for harsh environment applications. The wire-to-wire and wire-to-PCB connectors can operate in temperatures ranging from -40° to +150°. They are available with 1, 2 and 3 connection points, on a 5.8 mm pitch. The crimp contacts, that are also suitable for the 570 range, are available in three wire sizes together with optional phosphor bronze contact material for additional vibration tolerance. As the contacts are crimped to the wire, the waterproofing seals are fitted. Each seal has an individual part number and are colour coded for easy identification of the correct size for the wire diameter being used. In order to ensure the connector isn’t damaged during the wire preparation and installation operations, there is a contact retention system alongside matched hand tooling and semi-auto tooling for secure crimping.

Key features

  • IP67 certified
  • Available in wire-to-wire and wire-to-PCB
  • 5.8 mm pitch
  • 1, 2 and 3 contact positions
  • Rating to 10 A at 300 V
  • Can operate in temperatures between -40° to +105°
  • Waterproofing seals available in Ø1.7 to Ø2.1 mm (6 mm high), Ø2.1 to Ø2.7 mm (6 mm high), Ø2.1 to Ø2.7 mm (6.7 mm high) and Ø2.7 to Ø3.1 mm (6.7 mm high)
  • Housings are available in blue or white
  • Crimp contacts available in 14 AWG, 16-20 AWG and 20-22 AWG
  • Tooling also suitable for the 560, 566, 567 and 568 ranges
  • Double latching




See our E-seal range

The soft magnetic materials user guide series from Acal BFi

Acal BFi have produced a series of soft magnetic material user guides. Based on decades of experience providing our customers with the solutions they need, we share valuable insight and knowledge of the key materials worth considering.

read more

Acal BFi bring unique sensor, switch and motion system solutions offer from the Variohm Group to the European market

Acal BFi have enhanced and extended their specialist and custom solutions offer with sensor, switch and motion system technologies from the Variohm Group.

read more

White paper - Using powder materials to replace air-gaps for fringing flux reduction

This paper explores an alternative solution to large or multiple air-gaps in power-inductors – lower permeability powder materials.

read more