80 Output Bit Map LCD Extension Driver
Manufacturer's part number :
The NJU6453A is a 80 output bit map LCD extension driver to display graphics or characters combine with NJU6452A.
It contains 2,580 bit display data RAM, microprocessor, interface circuits, instruction decoder, and 80-segment driver.
The bit image display data sent from 8- or 16-bit MPU are stored in the display data RAM and drives segment of Dot Matrix LCD Panel synchronized with the NJU6452A common timing.
When the NJU6453A combine with the NJU6452A, the display capacity expand to 16×141 dots of graphics or 28 character 2-line with icon of 5×8 dots character display.
Furthermore, the wide operating voltage and low current consumption are useful apply to the battery operated items.
View our wide range of Analogue / Mixed signal products
View our portfolio of Semiconductors
See all products from our supplier New Japan Radio
Technical Data :
Quote and availability
- Direct Correspondence between Display Data RAM and LCD Pixel
- Display Data RAM (2,560 bits 80×8×4)
- Direct Interface with 8- or 16-bit MPU (Both of 68 and 80 type MPU can connect directly)
- Extension Driver of NJU6452A
- 80-segment Driver
- Programmable Duty Ratio (1/16 or 1/32 Duty)
- Useful Instruction Set (Display Data Read/Write, Display ON/OFF Cont, Display Data RAM Address Set, Status Read, Display Starting Line Set, Static Drive ON/OFF, Duty Ratio Setting, and Read Modify Write,)
- Low Power Consumption
- Operating Voltage (2.4V to 6.0V)
- LCD Driving Voltage (3.0V to 13.5V)
- Package Outline (CHIP)
- C-MOS Technology