1010W Easy Swap Power Supply

Manufacturer's part number :


Manufacturer Zippy Technology Corporation

Zippy Technology Corporation

Description :

Zippy Technology's range of enclosed AC/DC switching power supplies are designed for those computing applications where a fully tested stand-alone power supply is required. The M1W1-5A10V3H provides five outputs with 5V, 12V, -12V, 3.3V and 5VSB with an output power of 1010W at a peak efficiency of 86% with a universal AC input from 90 to 264V.

View our wide range of AC/DC products

View our portfolio of Power supplies

See all products from our supplier Zippy Technology Corporation

  • Quote and availability


  • Temperature range: Operating 0℃ --- 50℃, Storage -20℃ --- 80℃; Operating Temperature from 0℃ should start from AC 90V
  • Hold up Time: 16 ms Minimum at Full load and 90 VAC Input voltage
  • Efficiency: Typical 84% at 115V, 86% at 230V, Full load
  • Power good signal: On delay 100 ms to 500 ms, Off delay 1 ms
  • Over power protection: 110~150%
  • Over voltage protection: +3.3V→3.7~4.1V, +5V→5.7~6.5V, +12V→12.8~13.9V
  • Over current protection: The power supply shall latch off if the +12V output currents are over it's limitation. the limited current is over 110~150% for each power module.
  • Short circuit protection: +5V, +3.3V, +12V output to DC return shall cause no damage and power supply latch, -12V Short circuit to DC return shall cause no damage.
  • Safety: Meet UL, CUL, TÜV
  • Meet IEC-1000-3-2 CLASS D