You are currently viewing New and featured

Displaying 1-20 (of 184 products)  

Compact, ultra-stable, dual-wavelength laser, 488/640nm, 50/50mW

Qioptiq iFLEX Gemini

MPN:

iFLEX-Gemini 488/640nm

Manufacturer L3 Communications

Qioptiq

Description:

The iFLEX-Gemini is a solid-state 2-line laser source providing a combined, co-axial output beam. The system is mode-hop free and wavelength stabilised as a direct result of active temperature control. Automatic closed loop control ensures excellent long term power stability.

Each laser is independently controlled instead of combining beams through an AOTF. This enables instantaneous switching between wavelengths and simultaneous emission.

Fibre coupled versions of the iFLEX-Gemini are also offered. It is possible to attach the fibre after receipt of the iFLEX-Gemini.

Its robust design eliminates the need for user alignment of the internal laser sources. It is a true turnkey system.

The iFLEX-Gemini is an ideal solid-state replacement for Argon Ion and Argon-Krypton gas lasers.

Features:

  • Output beam – combined, co-axial, Gaussian
  • Fully independent laser control
  • True off for each wavelength
  • Class leading power stability
  • Ultra-low noise performance
  • Class-leading beam pointing stability

  • Benefits
  • No laser alignment required
  • Easy to use, portable, turnkey system
  • Long useful lifetime compared to gas lasers
  • Reliable and repeatable measurements

  • Applications
  • Confocal microscopy
  • Optogenetics
  • Flow cytometry
  • Test and measurement
  • Argon gas laser replacement
  • Medical imaging and instrumentation

Compact, ultra-stable, dual-wavelength laser, 488/647nm, 50/50mW

Qioptiq iFLEX Gemini

MPN:

iFLEX-Gemini 488/647nm

Manufacturer L3 Communications

Qioptiq

Description:

The iFLEX-Gemini is a solid-state 2-line laser source providing a combined, co-axial output beam. The system is mode-hop free and wavelength stabilised as a direct result of active temperature control. Automatic closed loop control ensures excellent long term power stability.

Each laser is independently controlled instead of combining beams through an AOTF. This enables instantaneous switching between wavelengths and simultaneous emission.

Fibre coupled versions of the iFLEX-Gemini are also offered. It is possible to attach the fibre after receipt of the iFLEX-Gemini.

Its robust design eliminates the need for user alignment of the internal laser sources. It is a true turnkey system.

The iFLEX-Gemini is an ideal solid-state replacement for Argon Ion and Argon-Krypton gas lasers.

Features:

  • Output beam – combined, co-axial, Gaussian
  • Fully independent laser control
  • True off for each wavelength
  • Class leading power stability
  • Ultra-low noise performance
  • Class-leading beam pointing stability

  • Benefits
  • No laser alignment required
  • Easy to use, portable, turnkey system
  • Long useful lifetime compared to gas lasers
  • Reliable and repeatable measurements

  • Applications
  • Confocal microscopy
  • Optogenetics
  • Flow cytometry
  • Test and measurement
  • Argon gas laser replacement
  • Medical imaging and instrumentation

Compact, ultra-stable, dual-wavelength laser, 488/561nm, 50/30mW

Qioptiq iFLEX Gemini

MPN:

iFLEX-Gemini 488/561nm

Manufacturer L3 Communications

Qioptiq

Description:

The iFLEX-Gemini is a solid-state 2-line laser source providing a combined, co-axial output beam. The system is mode-hop free and wavelength stabilised as a direct result of active temperature control. Automatic closed loop control ensures excellent long term power stability.

Each laser is independently controlled instead of combining beams through an AOTF. This enables instantaneous switching between wavelengths and simultaneous emission.

Fibre coupled versions of the iFLEX-Gemini are also offered. It is possible to attach the fibre after receipt of the iFLEX-Gemini.

Its robust design eliminates the need for user alignment of the internal laser sources. It is a true turnkey system.

The iFLEX-Gemini is an ideal solid-state replacement for Argon Ion and Argon-Krypton gas lasers.

Features:

  • Output beam – combined, co-axial, Gaussian
  • Fully independent laser control
  • True off for each wavelength
  • Class leading power stability
  • Ultra-low noise performance
  • Class-leading beam pointing stability

  • Benefits
  • No laser alignment required
  • Easy to use, portable, turnkey system
  • Long useful lifetime compared to gas lasers
  • Reliable and repeatable measurements

  • Applications
  • Confocal microscopy
  • Optogenetics
  • Flow cytometry
  • Test and measurement
  • Argon gas laser replacement
  • Medical imaging and instrumentation

Compact, ultra-stable, dual-wavelength, fibre-coupled laser, 445/515nm, 30/30mW

Qioptiq fibre-coupled iFLEX-Gemini

MPN:

iFLEX-Gemini fibre-coupled 445/515nm

Manufacturer L3 Communications

Qioptiq

Description:

The fibre-coupled iFLEX-Gemini is a solid-state 2-line laser source providing a combined, co-axial output beam, supplied with a single-mode fibre output. The system is mode-hop free and wavelength stabilised as a direct result of active temperature control. Automatic closed loop control ensures excellent long term power stability.

Each laser is independently controlled instead of combining beams through an AOTF. This enables instantaneous switching between wavelengths and simultaneous emission.

Fibre coupled versions of the iFLEX-Gemini are also offered. It is possible to attach the fibre after receipt of the iFLEX-Gemini.

Its robust design eliminates the need for user alignment of the internal laser sources. It is a true turnkey system.

The iFLEX-Gemini is an ideal solid-state replacement for Argon Ion and Argon-Krypton gas lasers.

Features:

  • Output beam – combined, co-axial, Gaussian
  • Fully independent laser control
  • True off for each wavelength
  • Class leading power stability
  • Ultra-low noise performance
  • Class-leading beam pointing stability

  • Benefits
  • No laser alignment required
  • Easy to use, portable, turnkey system
  • Long useful lifetime compared to gas lasers
  • Reliable and repeatable measurements

  • Applications
  • Confocal microscopy
  • Optogenetics
  • Flow cytometry
  • Test and measurement
  • Argon gas laser replacement
  • Medical imaging and instrumentation

Compact, ultra-stable, dual-wavelength, fibre-coupled laser, 405/448nm, 30/30mW

Qioptiq fibre-coupled iFLEX-Gemini

MPN:

iFLEX-Gemini fibre-coupled 405/448nm

Manufacturer L3 Communications

Qioptiq

Description:

The fibre-coupled iFLEX-Gemini is a solid-state 2-line laser source providing a combined, co-axial output beam, supplied with a single-mode fibre output. The system is mode-hop free and wavelength stabilised as a direct result of active temperature control. Automatic closed loop control ensures excellent long term power stability.

Each laser is independently controlled instead of combining beams through an AOTF. This enables instantaneous switching between wavelengths and simultaneous emission.

Fibre coupled versions of the iFLEX-Gemini are also offered. It is possible to attach the fibre after receipt of the iFLEX-Gemini.

Its robust design eliminates the need for user alignment of the internal laser sources. It is a true turnkey system.

The iFLEX-Gemini is an ideal solid-state replacement for Argon Ion and Argon-Krypton gas lasers.

Features:

  • Output beam – combined, co-axial, Gaussian
  • Fully independent laser control
  • True off for each wavelength
  • Class leading power stability
  • Ultra-low noise performance
  • Class-leading beam pointing stability

  • Benefits
  • No laser alignment required
  • Easy to use, portable, turnkey system
  • Long useful lifetime compared to gas lasers
  • Reliable and repeatable measurements

  • Applications
  • Confocal microscopy
  • Optogenetics
  • Flow cytometry
  • Test and measurement
  • Argon gas laser replacement
  • Medical imaging and instrumentation

Compact, ultra-stable, dual-wavelength, fibre-coupled laser, 405/640nm, 30/30mW

Qioptiq fibre-coupled iFLEX-Gemini

MPN:

iFLEX-Gemini fibre-coupled 405/640nm

Manufacturer L3 Communications

Qioptiq

Description:

The fibre-coupled iFLEX-Gemini is a solid-state 2-line laser source providing a combined, co-axial output beam, supplied with a single-mode fibre output. The system is mode-hop free and wavelength stabilised as a direct result of active temperature control. Automatic closed loop control ensures excellent long term power stability.

Each laser is independently controlled instead of combining beams through an AOTF. This enables instantaneous switching between wavelengths and simultaneous emission.

Fibre coupled versions of the iFLEX-Gemini are also offered. It is possible to attach the fibre after receipt of the iFLEX-Gemini.

Its robust design eliminates the need for user alignment of the internal laser sources. It is a true turnkey system.

The iFLEX-Gemini is an ideal solid-state replacement for Argon Ion and Argon-Krypton gas lasers.

Features:

  • Output beam – combined, co-axial, Gaussian
  • Fully independent laser control
  • True off for each wavelength
  • Class leading power stability
  • Ultra-low noise performance
  • Class-leading beam pointing stability

  • Benefits
  • No laser alignment required
  • Easy to use, portable, turnkey system
  • Long useful lifetime compared to gas lasers
  • Reliable and repeatable measurements

  • Applications
  • Confocal microscopy
  • Optogenetics
  • Flow cytometry
  • Test and measurement
  • Argon gas laser replacement
  • Medical imaging and instrumentation

Compact, ultra-stable, dual-wavelength, fibre-coupled laser, 405/647nm, 30/30mW

Qioptiq fibre-coupled iFLEX-Gemini

MPN:

iFLEX-Gemini fibre-coupled 405/647nm

Manufacturer L3 Communications

Qioptiq

Description:

The fibre-coupled iFLEX-Gemini is a solid-state 2-line laser source providing a combined, co-axial output beam, supplied with a single-mode fibre output. The system is mode-hop free and wavelength stabilised as a direct result of active temperature control. Automatic closed loop control ensures excellent long term power stability.

Each laser is independently controlled instead of combining beams through an AOTF. This enables instantaneous switching between wavelengths and simultaneous emission.

Fibre coupled versions of the iFLEX-Gemini are also offered. It is possible to attach the fibre after receipt of the iFLEX-Gemini.

Its robust design eliminates the need for user alignment of the internal laser sources. It is a true turnkey system.

The iFLEX-Gemini is an ideal solid-state replacement for Argon Ion and Argon-Krypton gas lasers.

Features:

  • Output beam – combined, co-axial, Gaussian
  • Fully independent laser control
  • True off for each wavelength
  • Class leading power stability
  • Ultra-low noise performance
  • Class-leading beam pointing stability

  • Benefits
  • No laser alignment required
  • Easy to use, portable, turnkey system
  • Long useful lifetime compared to gas lasers
  • Reliable and repeatable measurements

  • Applications
  • Confocal microscopy
  • Optogenetics
  • Flow cytometry
  • Test and measurement
  • Argon gas laser replacement
  • Medical imaging and instrumentation

Compact, ultra-stable, dual-wavelength, fibre-coupled laser, 488/640nm, 30/30mW

Qioptiq fibre-coupled iFLEX-Gemini

MPN:

iFLEX-Gemini fibre-coupled 488/640nm

Manufacturer L3 Communications

Qioptiq

Description:

The fibre-coupled iFLEX-Gemini is a solid-state 2-line laser source providing a combined, co-axial output beam, supplied with a single-mode fibre output. The system is mode-hop free and wavelength stabilised as a direct result of active temperature control. Automatic closed loop control ensures excellent long term power stability.

Each laser is independently controlled instead of combining beams through an AOTF. This enables instantaneous switching between wavelengths and simultaneous emission.

Fibre coupled versions of the iFLEX-Gemini are also offered. It is possible to attach the fibre after receipt of the iFLEX-Gemini.

Its robust design eliminates the need for user alignment of the internal laser sources. It is a true turnkey system.

The iFLEX-Gemini is an ideal solid-state replacement for Argon Ion and Argon-Krypton gas lasers.

Features:

  • Output beam – combined, co-axial, Gaussian
  • Fully independent laser control
  • True off for each wavelength
  • Class leading power stability
  • Ultra-low noise performance
  • Class-leading beam pointing stability

  • Benefits
  • No laser alignment required
  • Easy to use, portable, turnkey system
  • Long useful lifetime compared to gas lasers
  • Reliable and repeatable measurements

  • Applications
  • Confocal microscopy
  • Optogenetics
  • Flow cytometry
  • Test and measurement
  • Argon gas laser replacement
  • Medical imaging and instrumentation

Ultra-stable, four-wavelength, fibre-coupled laser,561/515/488/445nm, 50/40/50/50mW

Qioptiq iFLEX Viper

MPN:

iFLEX-Viper fibre-coupled 561/515/488/445nm

Manufacturer L3 Communications

Qioptiq

Description:

The iFLEX-Viper is a solid-state multi-line laser source with detachable single-mode polarization maintaining fibre output. Up to five individual lasers are efficiently combined and delivered through one SM PM fibre. The system is mode-hop free and wavelength stabilised as a direct result of active temperature control. Automatic closed loop control ensures excellent long term power stability.

Each laser is independently controlled instead of combining beams through an AOTF. This enables instantaneous switching between wavelengths and simultaneous emission of any wavelength combination. Lasers will only emit when requested, so lifetime may be extended.

The novel design of the iFLEX-Viper eliminates the need for user alignment of the internal laser sources. It is a true turnkey system and only requires a drive signal per laser line to initiate emission.

The iFLEX-Viper is compatible with a number of commercially available imaging software packages, such as; μ-Manager, MetaMorph®, LabView and Olympus cell.

Features:

  • Output beam – combined, co-axial, Gaussian
  • No laser alignment required
  • Laser performance guaranteed after fibre
  • Fully independent laser control for power adjustment and modulation (set lasers to emit in any sequence, any pairing or simultaneously)
  • True off for each wavelength
  • Mechanical shutter included on 50mW 532 and 561nm lines

  • Benefits
  • No laser alignment required
  • Easy to use, portable, turnkey system
  • Class leading power stability
  • Ultra-low noise performance
  • Class leading beam pointing stability
  • Reliable and repeatable measurements

  • Applications
  • Fluorescence imaging
  • Cytometry
  • Biotech
  • Single molecular imaging
  • Super resolution microscopy
  • TIRF
  • Confocal microscopy
  • Quality assurance
  • Metrology

Compact, ultra-stable, single-wavelength laser, 780nm, 70mW

Qioptic iFlex iRIS

MPN:

iFLEX-iRIS 780nm

Manufacturer L3 Communications

Qioptiq

Description:

The iFLEX-iRIS laser series is a range of solid-state, high-performance lasers with low amplitude noise. All wavelengths are offered in the same small size with the same control inputs. All TEC and smart control electronics are inside the laser.

Precision control electronics make these lasers ultralow noise and ideally suited to demanding imaging applications which benefit from improved signal-to-noise ratios.

Automatic power control ensures excellent power stability for lasers operating CW and also during modulation for iFLEX-iRIS lasers with CLM feature. The innovative Closed Loop Modulation (CLM) feature maintains excellent power stability during modulation and over the laser lifetime, plus precision adjustment at all output power levels. Unlike traditional open loop laser modulation, there is no need for laser calibration reset when using iFLEX-iRIS lasers with CLM feature.

The lasers are CDRH compliant when used with an iFLEX-iRIS CDRH interlock remote power supply. This is recommended for laboratory use.

Features:

  • All wavelengths same compact size
  • Fully integrated electronics
  • Class leading power stability
  • Ultra-low noise performance
  • Class-leading beam pointing stability
  • USB, RS232

  • Applications
  • Flow cytometry
  • Confocal microscopy
  • Medical imaging and instrumentation
  • DNA sequencing
  • Metrology
  • Ophthalmology
  • Analytical instrumentation

Compact, ultra-stable, single-wavelength, fibre-coupled laser, 413nm, 50mW

Qioptiq fibre-coupled iFLEX-iRIS

MPN:

iFLEX-iRIS fibre-coupled 413nm

Manufacturer L3 Communications

Qioptiq

Description:

The fibre-coupled iFLEX-iRIS laser series is a range of solid-state, high-performance lasers with low amplitude noise, supplied with a single-mode fibre output. All wavelengths are offered in the same small size with the same control inputs. All TEC and smart control electronics are inside the laser.

Precision control electronics make these lasers ultralow noise and ideally suited to demanding imaging applications which benefit from improved signal-to-noise ratios.

Automatic power control ensures excellent power stability for lasers operating CW and also during modulation for iFLEX-iRIS lasers with CLM feature. The innovative Closed Loop Modulation (CLM) feature maintains excellent power stability during modulation and over the laser lifetime, plus precision adjustment at all output power levels. Unlike traditional open loop laser modulation, there is no need for laser calibration reset when using iFLEX-iRIS lasers with CLM feature.

The lasers are CDRH compliant when used with an iFLEX-iRIS CDRH interlock remote power supply. This is recommended for laboratory use.

Features:

  • All wavelengths same compact size
  • Fully integrated electronics
  • Class leading power stability
  • Ultra-low noise performance
  • Class-leading beam pointing stability
  • USB, RS232

  • Applications
  • Flow cytometry
  • Confocal microscopy
  • Medical imaging and instrumentation
  • DNA sequencing
  • Metrology
  • Ophthalmology
  • Analytical instrumentation

Compact, ultra-stable, single-wavelength, fibre-coupled laser, 445nm, 50mW

Qioptiq fibre-coupled iFLEX-iRIS

MPN:

iFLEX-iRIS fibre-coupled 445nm

Manufacturer L3 Communications

Qioptiq

Description:

The fibre-coupled iFLEX-iRIS laser series is a range of solid-state, high-performance lasers with low amplitude noise, supplied with a single-mode fibre output. All wavelengths are offered in the same small size with the same control inputs. All TEC and smart control electronics are inside the laser.

Precision control electronics make these lasers ultralow noise and ideally suited to demanding imaging applications which benefit from improved signal-to-noise ratios.

Automatic power control ensures excellent power stability for lasers operating CW and also during modulation for iFLEX-iRIS lasers with CLM feature. The innovative Closed Loop Modulation (CLM) feature maintains excellent power stability during modulation and over the laser lifetime, plus precision adjustment at all output power levels. Unlike traditional open loop laser modulation, there is no need for laser calibration reset when using iFLEX-iRIS lasers with CLM feature.

The lasers are CDRH compliant when used with an iFLEX-iRIS CDRH interlock remote power supply. This is recommended for laboratory use.

Features:

  • All wavelengths same compact size
  • Fully integrated electronics
  • Class leading power stability
  • Ultra-low noise performance
  • Class-leading beam pointing stability
  • USB, RS232

  • Applications
  • Flow cytometry
  • Confocal microscopy
  • Medical imaging and instrumentation
  • DNA sequencing
  • Metrology
  • Ophthalmology
  • Analytical instrumentation

Compact, ultra-stable, single-wavelength, fibre-coupled laser, 473nm, 50mW

Qioptiq fibre-coupled iFLEX-iRIS

MPN:

iFLEX-iRIS fibre-coupled 473nm

Manufacturer L3 Communications

Qioptiq

Description:

The fibre-coupled iFLEX-iRIS laser series is a range of solid-state, high-performance lasers with low amplitude noise, supplied with a single-mode fibre output. All wavelengths are offered in the same small size with the same control inputs. All TEC and smart control electronics are inside the laser.

Precision control electronics make these lasers ultralow noise and ideally suited to demanding imaging applications which benefit from improved signal-to-noise ratios.

Automatic power control ensures excellent power stability for lasers operating CW and also during modulation for iFLEX-iRIS lasers with CLM feature. The innovative Closed Loop Modulation (CLM) feature maintains excellent power stability during modulation and over the laser lifetime, plus precision adjustment at all output power levels. Unlike traditional open loop laser modulation, there is no need for laser calibration reset when using iFLEX-iRIS lasers with CLM feature.

The lasers are CDRH compliant when used with an iFLEX-iRIS CDRH interlock remote power supply. This is recommended for laboratory use.

Features:

  • All wavelengths same compact size
  • Fully integrated electronics
  • Class leading power stability
  • Ultra-low noise performance
  • Class-leading beam pointing stability
  • USB, RS232

  • Applications
  • Flow cytometry
  • Confocal microscopy
  • Medical imaging and instrumentation
  • DNA sequencing
  • Metrology
  • Ophthalmology
  • Analytical instrumentation

Compact, ultra-stable, single-wavelength, fibre-coupled laser, 458nm, 45mW

Qioptiq fibre-coupled iFLEX-iRIS

MPN:

iFLEX-iRIS fibre-coupled 458nm

Manufacturer L3 Communications

Qioptiq

Description:

The fibre-coupled iFLEX-iRIS laser series is a range of solid-state, high-performance lasers with low amplitude noise, supplied with a single-mode fibre output. All wavelengths are offered in the same small size with the same control inputs. All TEC and smart control electronics are inside the laser.

Precision control electronics make these lasers ultralow noise and ideally suited to demanding imaging applications which benefit from improved signal-to-noise ratios.

Automatic power control ensures excellent power stability for lasers operating CW and also during modulation for iFLEX-iRIS lasers with CLM feature. The innovative Closed Loop Modulation (CLM) feature maintains excellent power stability during modulation and over the laser lifetime, plus precision adjustment at all output power levels. Unlike traditional open loop laser modulation, there is no need for laser calibration reset when using iFLEX-iRIS lasers with CLM feature.

The lasers are CDRH compliant when used with an iFLEX-iRIS CDRH interlock remote power supply. This is recommended for laboratory use.

Features:

  • All wavelengths same compact size
  • Fully integrated electronics
  • Class leading power stability
  • Ultra-low noise performance
  • Class-leading beam pointing stability
  • USB, RS232

  • Applications
  • Flow cytometry
  • Confocal microscopy
  • Medical imaging and instrumentation
  • DNA sequencing
  • Metrology
  • Ophthalmology
  • Analytical instrumentation

Compact, ultra-stable, single-wavelength, fibre-coupled laser, 488nm, 90mW

Qioptiq fibre-coupled iFLEX-iRIS

MPN:

iFLEX-iRIS fibre-coupled 488nm

Manufacturer L3 Communications

Qioptiq

Description:

The fibre-coupled iFLEX-iRIS laser series is a range of solid-state, high-performance lasers with low amplitude noise, supplied with a single-mode fibre output. All wavelengths are offered in the same small size with the same control inputs. All TEC and smart control electronics are inside the laser.

Precision control electronics make these lasers ultralow noise and ideally suited to demanding imaging applications which benefit from improved signal-to-noise ratios.

Automatic power control ensures excellent power stability for lasers operating CW and also during modulation for iFLEX-iRIS lasers with CLM feature. The innovative Closed Loop Modulation (CLM) feature maintains excellent power stability during modulation and over the laser lifetime, plus precision adjustment at all output power levels. Unlike traditional open loop laser modulation, there is no need for laser calibration reset when using iFLEX-iRIS lasers with CLM feature.

The lasers are CDRH compliant when used with an iFLEX-iRIS CDRH interlock remote power supply. This is recommended for laboratory use.

Features:

  • All wavelengths same compact size
  • Fully integrated electronics
  • Class leading power stability
  • Ultra-low noise performance
  • Class-leading beam pointing stability
  • USB, RS232

  • Applications
  • Flow cytometry
  • Confocal microscopy
  • Medical imaging and instrumentation
  • DNA sequencing
  • Metrology
  • Ophthalmology
  • Analytical instrumentation

Compact, ultra-stable, single-wavelength, fibre-coupled laser, 505nm, 30mW

Qioptiq fibre-coupled iFLEX-iRIS

MPN:

iFLEX-iRIS fibre-coupled 505nm

Manufacturer L3 Communications

Qioptiq

Description:

The fibre-coupled iFLEX-iRIS laser series is a range of solid-state, high-performance lasers with low amplitude noise, supplied with a single-mode fibre output. All wavelengths are offered in the same small size with the same control inputs. All TEC and smart control electronics are inside the laser.

Precision control electronics make these lasers ultralow noise and ideally suited to demanding imaging applications which benefit from improved signal-to-noise ratios.

Automatic power control ensures excellent power stability for lasers operating CW and also during modulation for iFLEX-iRIS lasers with CLM feature. The innovative Closed Loop Modulation (CLM) feature maintains excellent power stability during modulation and over the laser lifetime, plus precision adjustment at all output power levels. Unlike traditional open loop laser modulation, there is no need for laser calibration reset when using iFLEX-iRIS lasers with CLM feature.

The lasers are CDRH compliant when used with an iFLEX-iRIS CDRH interlock remote power supply. This is recommended for laboratory use.

Features:

  • All wavelengths same compact size
  • Fully integrated electronics
  • Class leading power stability
  • Ultra-low noise performance
  • Class-leading beam pointing stability
  • USB, RS232

  • Applications
  • Flow cytometry
  • Confocal microscopy
  • Medical imaging and instrumentation
  • DNA sequencing
  • Metrology
  • Ophthalmology
  • Analytical instrumentation

Compact, ultra-stable, single-wavelength, fibre-coupled laser, 520nm, 20mW

Qioptiq fibre-coupled iFLEX-iRIS

MPN:

iFLEX-iRIS fibre-coupled 520nm

Manufacturer L3 Communications

Qioptiq

Description:

The fibre-coupled iFLEX-iRIS laser series is a range of solid-state, high-performance lasers with low amplitude noise, supplied with a single-mode fibre output. All wavelengths are offered in the same small size with the same control inputs. All TEC and smart control electronics are inside the laser.

Precision control electronics make these lasers ultralow noise and ideally suited to demanding imaging applications which benefit from improved signal-to-noise ratios.

Automatic power control ensures excellent power stability for lasers operating CW and also during modulation for iFLEX-iRIS lasers with CLM feature. The innovative Closed Loop Modulation (CLM) feature maintains excellent power stability during modulation and over the laser lifetime, plus precision adjustment at all output power levels. Unlike traditional open loop laser modulation, there is no need for laser calibration reset when using iFLEX-iRIS lasers with CLM feature.

The lasers are CDRH compliant when used with an iFLEX-iRIS CDRH interlock remote power supply. This is recommended for laboratory use.

Features:

  • All wavelengths same compact size
  • Fully integrated electronics
  • Class leading power stability
  • Ultra-low noise performance
  • Class-leading beam pointing stability
  • USB, RS232

  • Applications
  • Flow cytometry
  • Confocal microscopy
  • Medical imaging and instrumentation
  • DNA sequencing
  • Metrology
  • Ophthalmology
  • Analytical instrumentation

Compact, ultra-stable, single-wavelength, fibre-coupled laser, 515nm, 40mW

Qioptiq fibre-coupled iFLEX-iRIS

MPN:

iFLEX-iRIS fibre-coupled 515nm

Manufacturer L3 Communications

Qioptiq

Description:

The fibre-coupled iFLEX-iRIS laser series is a range of solid-state, high-performance lasers with low amplitude noise, supplied with a single-mode fibre output. All wavelengths are offered in the same small size with the same control inputs. All TEC and smart control electronics are inside the laser.

Precision control electronics make these lasers ultralow noise and ideally suited to demanding imaging applications which benefit from improved signal-to-noise ratios.

Automatic power control ensures excellent power stability for lasers operating CW and also during modulation for iFLEX-iRIS lasers with CLM feature. The innovative Closed Loop Modulation (CLM) feature maintains excellent power stability during modulation and over the laser lifetime, plus precision adjustment at all output power levels. Unlike traditional open loop laser modulation, there is no need for laser calibration reset when using iFLEX-iRIS lasers with CLM feature.

The lasers are CDRH compliant when used with an iFLEX-iRIS CDRH interlock remote power supply. This is recommended for laboratory use.

Features:

  • All wavelengths same compact size
  • Fully integrated electronics
  • Class leading power stability
  • Ultra-low noise performance
  • Class-leading beam pointing stability
  • USB, RS232

  • Applications
  • Flow cytometry
  • Confocal microscopy
  • Medical imaging and instrumentation
  • DNA sequencing
  • Metrology
  • Ophthalmology
  • Analytical instrumentation

Compact, ultra-stable, single-wavelength, fibre-coupled laser, 532nm, 25mW

Qioptiq fibre-coupled iFLEX-iRIS

MPN:

iFLEX-iRIS fibre-coupled 532nm

Manufacturer L3 Communications

Qioptiq

Description:

The fibre-coupled iFLEX-iRIS laser series is a range of solid-state, high-performance lasers with low amplitude noise, supplied with a single-mode fibre output. All wavelengths are offered in the same small size with the same control inputs. All TEC and smart control electronics are inside the laser.

Precision control electronics make these lasers ultralow noise and ideally suited to demanding imaging applications which benefit from improved signal-to-noise ratios.

Automatic power control ensures excellent power stability for lasers operating CW and also during modulation for iFLEX-iRIS lasers with CLM feature. The innovative Closed Loop Modulation (CLM) feature maintains excellent power stability during modulation and over the laser lifetime, plus precision adjustment at all output power levels. Unlike traditional open loop laser modulation, there is no need for laser calibration reset when using iFLEX-iRIS lasers with CLM feature.

The lasers are CDRH compliant when used with an iFLEX-iRIS CDRH interlock remote power supply. This is recommended for laboratory use.

Features:

  • All wavelengths same compact size
  • Fully integrated electronics
  • Class leading power stability
  • Ultra-low noise performance
  • Class-leading beam pointing stability
  • USB, RS232

  • Applications
  • Flow cytometry
  • Confocal microscopy
  • Medical imaging and instrumentation
  • DNA sequencing
  • Metrology
  • Ophthalmology
  • Analytical instrumentation

Compact, ultra-stable, single-wavelength, fibre-coupled laser, 561nm, 25mW

Qioptiq fibre-coupled iFLEX-iRIS

MPN:

iFLEX-iRIS fibre-coupled 561nm

Manufacturer L3 Communications

Qioptiq

Description:

The fibre-coupled iFLEX-iRIS laser series is a range of solid-state, high-performance lasers with low amplitude noise, supplied with a single-mode fibre output. All wavelengths are offered in the same small size with the same control inputs. All TEC and smart control electronics are inside the laser.

Precision control electronics make these lasers ultralow noise and ideally suited to demanding imaging applications which benefit from improved signal-to-noise ratios.

Automatic power control ensures excellent power stability for lasers operating CW and also during modulation for iFLEX-iRIS lasers with CLM feature. The innovative Closed Loop Modulation (CLM) feature maintains excellent power stability during modulation and over the laser lifetime, plus precision adjustment at all output power levels. Unlike traditional open loop laser modulation, there is no need for laser calibration reset when using iFLEX-iRIS lasers with CLM feature.

The lasers are CDRH compliant when used with an iFLEX-iRIS CDRH interlock remote power supply. This is recommended for laboratory use.

Features:

  • All wavelengths same compact size
  • Fully integrated electronics
  • Class leading power stability
  • Ultra-low noise performance
  • Class-leading beam pointing stability
  • USB, RS232

  • Applications
  • Flow cytometry
  • Confocal microscopy
  • Medical imaging and instrumentation
  • DNA sequencing
  • Metrology
  • Ophthalmology
  • Analytical instrumentation

Displaying 1-20 (of 184 products)  

Request a quote

Consult. Design. Integrate.

Register to use My Acal BFi

Contact us for technical solutions advice

Quick component finder