c.LINK® Coaxial Network Controller

Manufacturer's part number :

EN2210

Manufacturer Entropic

Entropic

Description :

The EN2210 combines increased host interface flexibility with reduced power consumption and lower system integration costs. Working together with the EN1010 Coaxial Network Interface, the chipset operates at radio frequencies from 800 to 1500 MHz, enabling compliance to the Multimedia over Coax Alliance (MoCA™) specification. Based on Entropic's c.LINK® protocol, the core technology chosen by MoCA™, the EN2210 enables secure and robust communication using existing home coaxial cables without the need for new wiring or modifications. MoCA™ members include cable, telco and satellite operators, set-top box OEMs, network equipment OEMs and consumer electronics OEMs worldwide.

View our wide range of RF ICs

View our portfolio of RF components

See all products from our supplier Entropic

Technical Data :

  • Quote and availability

    Features

  • Enables MoCA™ 1.0 compliance
  • Fully integrated c.LINK® MAC/PHY for coaxial networks
  • Data capacity of at least 250 Mbps for multiple simultaneous HDTV and SDTV video streams
  • Hardware DES encryption for network privacy
  • Improved MAC efficiency with packet aggregation (>150 Mbps MAC rate)
  • Software Development Kit (SDK), driver source code and standard APIs allow easy product integration
  • Drivers for Linux OS environment
  • Diagnostic applications
  • mPCI and MII/FlexBus dev platforms
  • Interfaces
  • Media independent interface - MII and GMII
  • Over clocked MII (50 MHz, 200 Mbps)
  • PCI v2.2
  • Master or slave device mode
  • Flexbus
  • 16 or 32 bit data
  • 16-24 bit address
  • Synchronous or asynchronous clock
  • Slave operation
  • Operating modes
  • PCI or FlexBus
  • GMII/MII + FlexBus
  • GMII/MII only (PHY mode)
  • Compatibility
  • IEEE 802.1p
  • Network Characteristics
  • Rate adaptation from 20 to 250 Mbps
  • Constant-delay and low-latency network
  • TDMA/TDD-fully coordinated MAC, no collisions
  • Frequency selection for efficient bandwidth utilization
  • Support up to eight nodes per c.LINK network
  • Packet aggregation support for increased data rate
  • Parameterized Quality of Service (QoS)
  • Centralized network management and control
  • Electrical and Physical Characteristics
  • 3.3-V I/O, PCI interface (3.3-V/5.0-V)
  • 1.2 V, 1.8 V, 3.3 V (power supply)
  • 1.5 W (max) power consumption
  • 324-PBGA
  • Benefits

  • Seamlessly links consumer entertainment devices from room to room using existing coax wiring
  • Better than 250 Mbps through coaxial cable
  • Reliably accesses and distributes digital video content, including multiple streams of HDTV
  • Enables retail set-top box solution with no professional installation required
  • Supports streaming media, including audio, SDTV and HDTV- Without compromise
Features Similar products
Function Home Networking - Multimedia over Coax - MoCA  

  similar products found

Search similar products
Package PBGA-324