Six 1 x 4 RF Multiplexer, 50Ohm
Manufacturer's part number :
The Keysight Technologies E1472A 50 ohm RF Multiplexer is a C-size, 1-slot, register- based VXI module. It is the ideal choice to route test signals from your application to your test instruments (i.e., oscilloscope and spectrum, network, distortion analysers, or other RF equipment). The E1472A is functionally identical to the E1474A except for output impedance.
The RF multiplexer can be used as six multiplexers or combined with others to form a larger tree-switched multiplexer or a limited stubless matrix. You can easily and inexpensively expand the E1472A via the E1473A 50 &ohm F multiplexer expander or via the E1475A 75 ohm RF multiplexer expander.
The E1472A can easily be programmed with SCPI commands to scan multiple channels, where each channel is switched to its common, one at a time. This module is arranged as six independent banks of channels (Bank 0 through Bank 5), each acting as a 1 x 4 one-wire multiplexer. Only one channel in each bank can be connected to its common at any time. The multiplexer relays are arranged in a tree-switched configuration, providing high isolation and low VSWR. Each channel consists of a non-latching armature relay.
View our wide range of VXI products
View our portfolio of PXI / AXIe / DAQ and modular solutions
See all products from our supplier Keysight Technologies
Quote and availability
- 1-Slot, C-size, register based
- Six 1 x 4 multiplexers
- Switch signals up to 1.3 GHz
- SMB male connectors for high performance
- Controls E1473A/E1475A RF expanders
- Tree-switching for high isolation, low VSWR