510W Solar Array Simulator DC Module 0-65V, 8.5A

Manufacturer's part number :

E4361A

Manufacturer Agilent Technologies

Keysight Technologies

Description :

The Keysight Technologies E4361A is a 510W solar array simulator DC power module that simulates the output characteristics of a solar array. The E4361A is primarily a current source with very low output capacitance. It offers fast I-V curve changes allowing you to accurately simulate the output of different solar arrays under various environmental conditions (ex. temperature, age, eclipse, spin etc.). The E4360 gives you the flexibility to operate it in two ways:

  • Input the four key operational parameters (Voc, Isc, Vmp, Imp) needed for the SAS to internally create an I-V curve of a solar array
  • This module works with the Keysight Technologies E4360A Modular Solar Array Simulator (SAS) Mainframe which can hold up to two modules and saves rack space with its 2U high size. LAN, USB, and GPIB interfaces are standard.

    To simplify test system software development, the 14360A System Control Tool software package is shipped free with every E4360A SAS mainframe. This software simplifies the programming and control of multiple SASs. It allows a single function call to setup and control up to 100 E4360 outputs in a SAS system.

    • Quote and availability

      Features

      Output Ratings (Simulator and Table Modes)
    • Max. Power: 510 W
    • Voc Max.: 65 V
    • Isc Max.: 8.5 A
    • Output Ratings (Fixed mode)
    • Max Power: 510 W
    • V rated: 0-60 V
    • I rated: 0-8.5 A
    Programming Accuracy at 22°C ±5°C
    • Voltage (Fixed Mode): 0.075% + 25 mV
    • Current (Fixed Mode): 0.2% + 20 mA
    • Ripple & Noise (20 Hz to 20 MHz)
    • Voltage rms, p-p (Simulator/Table Mode): 20 mV rms, 125 mV p-p
    • Voltage rms, p-p (Fixed Mode): 24 mV rms, 150 mV p-p
    • Current rms, p-p (Fixed Mode): 2.5 mA rms, 19 mA p-p
    Features Similar products
    Maximum voltage per output (V) 51-100  

      similar products found

    Search similar products
    Maximum current per output (A) 3.1-10  
    Maximum power (W) 176-1,200