Probe, 34 channel, soft touch pro, Single-ended, connects to 40-pin LA cable

Manufacturer's part number :

E5404A

Manufacturer Agilent Technologies

Keysight Technologies

Description :

The Keysight E5404A Pro Series soft touch connectorless probe provides a convenient, reliable means of probing your target system without the need for a connector. Pro Series soft touch connectorless probing supports the new industry standard interface for smaller connectorless probing. This new footprint is 30% smaller than our original soft touch probes making it easy to use in designs that are tight on space. The soft touch top-side retention module is mounted on the same side of the board as the connectorless footprint so there is no need to access the back side of the board or for a special retention module for thick boards. Keysight's soft touch connectorless technology ensures a long life of trouble-free probing without the need for special plating or preparation of the probe site. This probe can be used with any logic analyzer with 40-pin cable connectors.

  • Quote and availability

    Features

  • 34 channels: 32 single-ended data, 2 single-ended clock
  • < 0.7 pF equivalent load capacitance
  • > 2.5 Gb/s maximum data rate
  • Measure signals with as little as 500 mV p-p signal amplitude
  • Requires up-front design of pro-series soft touch connectorless footprint on PC board (no connector on the target board)
  • Micro spring-pin technology provides reliable contact to signal pads even when probing uneven or contaminated board surfaces
  • Top-side retention module eliminates need to access back of the board
Features Similar products
Area Oscilloscope single-ended active probes  

  similar products found

Search similar products