Sie betrachten gerade Produktneuheiten und Produkt-Highlights

Angezeigte Produkte 1-20 (von 56 Produkten)   Alle anzeigen

Fast, low-noise, SWIR InGaAs camera

C-RED 2

Artikelnummer des Herstellers:

C-RED 2

Hersteller L3 Communications

First Light Imaging

Beschreibung:

C-RED 2 is a revolutionary ultra-high-speed, low-noise camera designed for high resolution Short Wave InfraRed (SWIR) imaging. Thanks to its state-of-the-art electronics, software and innovative mechanics, C-RED 2 is capable of unprecedented performances – up to 400 images per second with a read-out noise from 10 to 30 electrons.

To achieve these breakthrough performances, C-RED 2 integrates a 640 x 512 InGaAs PIN Photodiode detector with 15 μm pixel pitch for high resolution, which embeds an electronic shutter with integration pulses shorter than 1 μs. C-RED 2 is also capable of windowing and multiple regions of interest (ROI), allowing faster image rate while maintaining a very low noise.

The software allows real time applications, and the interface is Camera Link full and superspeed USB3.

C-RED 2 is designed to be updated remotely, and needs no human assistance to manage the cooling. The camera can operate in very low-light conditions as well as remote locations.

C-RED 2 is easily embeddable in any system thanks to its low volume, and can operate in any environment or complex situations.

Designed for high-end SWIR applications, smart and compact, C-RED 2 operates from 0.9 to 1.7 μm with a very good quantum efficiency over 70%, offering new opportunities for industrial or scientific applications.

Eigenschaften:

  • InGaAs 640 x 512 sensor
  • 0.8 µm to 1.7 µm
  • 70% quantum efficiency
  • 15 µm pixel pitch
  • Windowing and ROI
  • Cooled sensor operation for low dark

  • Camera specifications
  • 400 FPS full frame / 30 electrons read out noise
  • 10 electrons read out noise / 25 FPS full frame
  • Cooling: air or liquid (ambiant)
  • 14 bits digitisation at all speed/readout modes
  • Camera link full and USB3.0 datalink ensuring sufficient throughput at all speeds
  • C-mount optical interface
  • Size: L 140 x W 75 x H 55 mm
  • Weight: 0.9 kg

Compact waterproof pan/tilt unit

Flir PTU-5

Artikelnummer des Herstellers:

PTU-5

Hersteller L3 Communications

FLIR

Beschreibung:

With top and side payload mounting options, class leading speed and accuracy, easy integration, and MIL-spec durability to stand up to harsh environments, PTU-5 is the pan/tilt solution OEMs have been looking for.

Standing only six inches tall when fully integrated, the new FLIR PTU-5 can hold up to five pounds on its top bracket, packing incredible performance into a compact package. Even with its small size the PTU-5 is more accurate than many other – more expensive – systems thanks to the absolute encoders used on the drive axes.

Fully sealed and weather-proof rated to IP67, the PTU-5 can be used anywhere, even outdoors. By doing away with the separate controller box, and including a unique ability to home the axes without returning to zero, the PTU-5 is easy to set-up and has a fast start-up sequence.

Eigenschaften:

  • Class-leading speed and accuracy
  • Turn on and track moving targets in seconds
  • Extra small, rugged, portable design
  • Lightweight, MIL-spec system for harsh environments
  • Easy integration
  • Flexibility for a wide range of applications and sensors

Ferrite-based dual inductor, 10µH, 6.5A

Laird MCD1010 series

Artikelnummer des Herstellers:

MCD1010100M-10

Hersteller L3 Communications

Laird - Magnetic Ceramic Products

Beschreibung:

Laird MCD1010 series dual inductors offer an effective and reliable approach to improve sound performance and reliability for digital amplifier application for automotive or general consumer electronics, while reducing board layout space and enabling more compact amplifier designs.

Eigenschaften:

  • Dual inductor in one package
  • Ferrite based and magnetic shielded construction
  • Low magnetic coupling between inductors
  • Operating temperature -40°C to 155°C (including self-heating)
  • Surface mount device

Ferrite-based dual inductor, 15µH, 5.4A

Laird MCD1010 series

Artikelnummer des Herstellers:

MCD1010150M-10

Hersteller L3 Communications

Laird - Magnetic Ceramic Products

Beschreibung:

Laird MCD1010 series dual inductors offer an effective and reliable approach to improve sound performance and reliability for digital amplifier application for automotive or general consumer electronics, while reducing board layout space and enabling more compact amplifier designs.

Eigenschaften:

  • Dual inductor in one package
  • Ferrite based and magnetic shielded construction
  • Low magnetic coupling between inductors
  • Operating temperature -40°C to 155°C (including self-heating)
  • Surface mount device

Ferrite-based dual inductor, 18µH, 4.6A

Laird MCD1010 series

Artikelnummer des Herstellers:

MCD1010180M-10

Hersteller L3 Communications

Laird - Magnetic Ceramic Products

Beschreibung:

Laird MCD1010 series dual inductors offer an effective and reliable approach to improve sound performance and reliability for digital amplifier application for automotive or general consumer electronics, while reducing board layout space and enabling more compact amplifier designs.

Eigenschaften:

  • Dual inductor in one package
  • Ferrite based and magnetic shielded construction
  • Low magnetic coupling between inductors
  • Operating temperature -40°C to 155°C (including self-heating)
  • Surface mount device

Low-profile SMD power inductor, 0.36µH, 25.2A

Laird MGV1202 series

Artikelnummer des Herstellers:

MGV1202R36M-10

Hersteller L3 Communications

Laird - Magnetic Ceramic Products

Beschreibung:

Laird MGV1202 series high current power inductors offer an effective and reliable approach to improve performance and reliability for power supply for Telecom and Consumer Electronics application, increase power efficiency and also reduce device thickness. 

Eigenschaften:

  • Extreme low DCR with high efficiency
  • Large current with small size
  • Low profile and high reliability
  • Magnetic shielded and molded construction
  • Operating temperature : -55°C ~ +125°C including self-heating

Low-profile SMD power inductor, 0.68µH, 20.5A

Laird MGV1202 series

Artikelnummer des Herstellers:

MGV1202R68M-10

Hersteller L3 Communications

Laird - Magnetic Ceramic Products

Beschreibung:

Laird MGV1202 series high current power inductors offer an effective and reliable approach to improve performance and reliability for power supply for Telecom and Consumer Electronics application, increase power efficiency and also reduce device thickness. 

Eigenschaften:

  • Extreme low DCR with high efficiency
  • Large current with small size
  • Low profile and high reliability
  • Magnetic shielded and molded construction
  • Operating temperature : -55°C ~ +125°C including self-heating

Low-profile SMD power inductor, 1µH, 17.5A

Laird MGV1202 series

Artikelnummer des Herstellers:

MGV12021R0M-10

Hersteller L3 Communications

Laird - Magnetic Ceramic Products

Beschreibung:

Laird MGV1202 series high current power inductors offer an effective and reliable approach to improve performance and reliability for power supply for Telecom and Consumer Electronics application, increase power efficiency and also reduce device thickness. 

Eigenschaften:

  • Extreme low DCR with high efficiency
  • Large current with small size
  • Low profile and high reliability
  • Magnetic shielded and molded construction
  • Operating temperature : -55°C ~ +125°C including self-heating

Low-profile SMD power inductor, 1.5µH, 15A

Laird MGV1202 series

Artikelnummer des Herstellers:

MGV12021R5M-10

Hersteller L3 Communications

Laird - Magnetic Ceramic Products

Beschreibung:

Laird MGV1202 series high current power inductors offer an effective and reliable approach to improve performance and reliability for power supply for Telecom and Consumer Electronics application, increase power efficiency and also reduce device thickness. 

Eigenschaften:

  • Extreme low DCR with high efficiency
  • Large current with small size
  • Low profile and high reliability
  • Magnetic shielded and molded construction
  • Operating temperature : -55°C ~ +125°C including self-heating

Low-profile SMD power inductor, 1.8µH, 13.6A

Laird MGV1202 series

Artikelnummer des Herstellers:

MGV12021R8M-10

Hersteller L3 Communications

Laird - Magnetic Ceramic Products

Beschreibung:

Laird MGV1202 series high current power inductors offer an effective and reliable approach to improve performance and reliability for power supply for Telecom and Consumer Electronics application, increase power efficiency and also reduce device thickness. 

Eigenschaften:

  • Extreme low DCR with high efficiency
  • Large current with small size
  • Low profile and high reliability
  • Magnetic shielded and molded construction
  • Operating temperature : -55°C ~ +125°C including self-heating

Low-profile SMD power inductor, 2.2µH, 9.6A

Laird MGV1202 series

Artikelnummer des Herstellers:

MGV12022R2M-10

Hersteller L3 Communications

Laird - Magnetic Ceramic Products

Beschreibung:

Laird MGV1202 series high current power inductors offer an effective and reliable approach to improve performance and reliability for power supply for Telecom and Consumer Electronics application, increase power efficiency and also reduce device thickness. 

Eigenschaften:

  • Extreme low DCR with high efficiency
  • Large current with small size
  • Low profile and high reliability
  • Magnetic shielded and molded construction
  • Operating temperature : -55°C ~ +125°C including self-heating

Transceiver, 4 x 25.78 Gb/s 850 nm multi-mode microQSFP SR4

Ligent LTU8531-BC

Artikelnummer des Herstellers:

LTU8531-BC+

Hersteller L3 Communications

Hisense Broadband

Beschreibung:

The LTU8531 is a microQSFP Optical transceiver for 4 x 25Gb/s optical links. It is compliant with the microQSFP MSA, IEEE P802.3bm 100GBASE-SR4 specifications. It operates at 25.78Gb/s up to 100m over OM4 Multi-mode fibre.

Eigenschaften:

  • 4 independent parallel optical channels
  • Each channel data rate up to 25.78Gb/s with integrated CDR
  • Hot pluggable
  • Up to 100m link on OM4 Multi-mode fibre
  • 850nm VCSEL/PD array technology
  • CML compatible electrical I/O
  • microQSFP MSA compliance
  • Optical connectivity via industry standard MPO/MTP terminated fibre ribbon
  • Monitors for TX power, VCSEL bias, received power, module temperature and module supply
  • Case operating temperature: commercial: 0 to 70°C
  • RoHS II compliance

Active optical cable, 4 x 25.78Gb/s microQSFP

Ligent DUF8503-4C

Artikelnummer des Herstellers:

DUF8503-4CXX

Hersteller L3 Communications

Hisense Broadband

Beschreibung:

The DUF8503 is a microQSFP active optical cable (AOC) for 100Gb/s optical links. It is compliant with the microQSFP MSA, IEEE P802.3bm 100GBASE- SR4 specifications. It operates at 25.78Gb/s and the cable length is up to 100m.

Eigenschaften:

  • 4 independent parallel optical channels
  • Channel data rate up to 25.78Gb/s 
  • Hot pluggable
  • Up to 100m link over OM4 multi-mode fibre 
  • CML compatible electrical I/O
  • microQSFP MSA compliance
  • Case operating temperature range: commercial: 0 to 70°C
  • RoHS compliance

Video processor, small, low-power, single-channel, on-board

SLA-1500-OEM

Artikelnummer des Herstellers:

SLA-1500-OEM

Hersteller L3 Communications

SightLine

Beschreibung:

Designed to add advanced capabilities to camera systems, the 1500-OEM processor is a very small, low-power, single-channel on-board video processing solution which adds value to a wide range of applications. It is 1.04 x 1.48 inches (26.5 x 37.7 mm) and weighs 0.27 ounces (7.6 grams).

The board processes and streams HD video outputs to 720p/30. It operates on video right at the source, which is key for low latency performance and the best video quality.

Camera interfaces supported

  • •   Analog (NTSC or PAL) – two inputs
  • •   Sony HD EO Block FCB-EH6xxx
  • •   Sony HD EO Block FCB-EV7500
  • •   Hitachi HD EO Block DI-SC120R
  • •   FLIR Tau LWIR – direct board to camera connection
  • •   FLIR Quark LWIR – adaptor uAB board / FFC ribbon and then small adaptor board at camera
  • •   DRS Tamarisk LWIR – adaptor uAB board / FFC ribbon and then small adaptor board at camera
  • •   HDMI
  • •   Camera link

The supported Video Processing Library provides a suite of video functions that are key in a wide variety of ISR applications. Configured as either an SLA for gimbal control or SLE versions, the 1500-OEM provides a tailorable, powerful solution.

Eigenschaften:

  • Full set of video processing functions – see SightLine's Video Processing Library – including electronic stabilisation, scene and object tracking, MTD, video enhancement, recording, and encoding
  • Multiple video Inputs, single channel processing
  • Video inputs: HD, SD, analog, digital
  • Video outputs: SD encoded and analog
  • Tracker telemetry output to Gimbal system controller
  • Onboard video and snapshot recording to MicroSD
  • RS-232 or Ethernet command and control

Video processor, multi-channel, high definition (HD)

SLA-3000-OEM

Artikelnummer des Herstellers:

SLA-3000-OEM

Hersteller L3 Communications

SightLine

Beschreibung:

The SLA-3000-OEM is a multi-channel high definition (HD) advanced video-processing solution for the next generation of surveillance gimbals and camera systems. It includes two video channels and is capable of providing a full suite of processing functions and provide full frame rate HD H.264 streaming with KLV data to 1080p/30. It is 3.47 x 1.97 x 0.2 inches (88 x 50 x 6.25 mm) and weighs 1.4 ounces (39 grams).

Camera interfaces supported

These supported interfaces provide two input channels

  • •   Sony HD EO block FCB-EH6xxx
  • •   Sony HD EO block FCB-EV7500
  • •   Hitachi HD EO block DI-SC120R
  • •   HDMI (in development)
  • •   Analog (NTSC or PAL) two inputs per channel
  • •   FLIR Quark LWIR – adaptor uAB board / FFC ribbon and then small adaptor board at camera
  • •   DRS Tamarisk LWIR – adaptor uAB board / FFC ribbon and then small adaptor board at camera

Eigenschaften:

  • Will support full set of video processing functions – see SightLine's Video Processing Software Library – including electronic stabilisation, scene and object tracking, MTD, video enhancement, recording, and encoding
  • Encoded HD video output (to 1080p/30)
  • HD video output via 10/100 Ethernet
  • Elementary video (H.264) and metadata (KLV) encoding with MPEG2-TS (transport stream)
  • Two digital inputs up to 1080p resolution
  • Adaptor boards provide input configuration flexibility
  • One digital output (Ethernet)
  • RS-232 or Ethernet command and control
  • Software upgrade to full SLA-3000 capabilities

Integrated sensor board for indoor air-quality monitoring

MiCS-VZ-89TE

Artikelnummer des Herstellers:

MiCS-VZ-89TE

Hersteller L3 Communications

Amphenol Advanced Sensors

Beschreibung:

The MiCS-VZ-89TE combines state-of-the-art MOS sensor technology with intelligent detection algorithms to monitor tVOCs and CO2 equivalent variations in confined spaces, such as meeting rooms or vehicle cabins.

The dual signal output can be used to control ventilation on-demand, saving energy and reducing cost-of-ownership.

Eigenschaften:

  • Calibration free
  • Low power
  • Wide VOCs detection range
  • High sensitivity
  • High resistance to shocks and vibrations

Extended dynamic range spectroradiometer

PR-788

Artikelnummer des Herstellers:

PR-788

Hersteller L3 Communications

Photo Research Inc

Beschreibung:

The PR-788 spectral measurement system is an extended, dynamic range spectroradiometer used in research, quality control and production floor applications for flat panel display, automotive, aerospace and similar manufacturers.

The PR-788 provides an extended wide dynamic range of 1 million:1 output. It measures the output of devices and tests any display or backlight at highest speeds available on the market, reducing the total time required to characterise and calibrate display products. It measures from black to full white, without the need to add external attenuation, due to the inclusion of an automated internal neutral density (ND) filter.

The spectroradiometer measures spectral resolution capability for any display technology with its variable spectral bandwidth. This technology allows the user to automatically select spectral bandwidth down to 2nm and eliminates the need to change the measuring field size.

Eigenschaften:

  • Wide dynamic range – test any display/backlight without adding external filtration or changing apertures
  • Variable spectral bandwidth – spectral resolution capability for any display technology from LCD to laser projectors
  • High speed cycle times – dramatic reduction of total time required to test / calibrate display products
  • USB, RS232, Bluetooth interfaces – easy integration into automated test environment (ATE)
  • Exposure time range for the PR-788 ranges from 7ms to 2 minutes
  • Typical applications – backlight testing, OLED testing, laser projector calibration

AirPrime® Bluetooth 4.2 dual-mode module for transmitting high-quality audio and data

BC127

Artikelnummer des Herstellers:

BC127

Hersteller L3 Communications

Sierra Wireless

Beschreibung:

The BC127 Certified Bluetooth 4.2 module with integrated antenna is ideal for easily adding high-quality audio and data communication.

The dual-mode Bluetooth Classic and Bluetooth Low Energy (BLE) module connects prosumer and industrial devices requiring multiple connection and/or high-end audio applications.

It is ideal for any development that requires high quality Bluetooth audio streaming or a dual-mode solution to connect both to BLE enabled smart phones and classic Bluetooth smart phones.

Eigenschaften:

  • Dual-mode: Bluetooth and Bluetooth Low Energy (BLE) transmits high-quality audio and data
  • Embedded Bluetooth Protocol Stack with simple UART and GPIO interface for command and control
  • Hostless module with regulatory certifications and integrated antenna for easy integration
  • Supports multiple connections to external Codecs with I2S, PCM and SPDIF interfaces
  • Input and output can be digital or analog audio
  • Typical applications

  • Smart phone controlled accessories
  • Wireless speakers and headsets
  • Intercom push to talk gateways
  • Wireless docks and sound bars
  • Dual-mode wireless gateways
  • General Bluetooth controllers
  • Remote controls and smart TVs

AirPrime® Bluetooth 4.1 low-energy, data-only module

BC118

Artikelnummer des Herstellers:

BC118

Hersteller L3 Communications

Sierra Wireless

Beschreibung:

The BC118 certified Bluetooth Low Energy (BLE) 4.1 module with integrated antenna is ideal for quickly and cost effectively adding simple, reliable low-energy data communication.

It connects prosumer and industrial applications requiring data only connections for simple sensor to phone or cable replacement applications.

It is ideal for any development that requires the most power efficient smart Bluetooth Low Energy solution to connect to other modules or any smart phone or tablet.

Eigenschaften:

  • Single mode Bluetooth Low Energy (BLE) 4.1 transmits simple data only
  • Embedded Bluetooth protocol stack with simple UART interface for command and control
  • Hostless module with regulatory certifications and integrated antenna for easy integration
  • Supports single connections with UART, I2C, analog and GPIO Interfaces
  • Transparent and command mode for I2C and UART
  • Can run as standalone or controlled by a host
  • Over the air secure firmware upgrade
  • Typical applications

  • Industrial: lightening, pipe, actuators, sensors
  • Health and fitness
  • Smart Bluetooth bridges
  • Automotive application
  • Remote controls
  • Cable replacement

AirPrime® 802.11 b/g/n 2.4Ghz Wi-Fi module

BC188

Artikelnummer des Herstellers:

BC188

Hersteller L3 Communications

Sierra Wireless

Beschreibung:

The BC188 is a highly flexible, low power Wi-Fi module with integrated antenna is ideal for quickly and cost effectively adding wireless communication.

It supports 802.11 b/g/n and offers preloaded Melody Wi-Fi software including a TCP/IP stack and a simple UART interface. BC188 can be easily configured and controlled from the UART interface or by simply connecting to it from a Smartphone and controlling it from any browser. This module connects prosumer and industrial applications requiring simultaneous AP/station communication.

It is ideal for any development that requires high-quality Wi-Fi connection and streaming.

Eigenschaften:

  • Single band 2.4Ghz IEEE 802.11 b/g/n, 1x1 SISO, 2.4GHz and HT20 for secure WPA and SSL data transmission
  • Simultaneous hotspot/client and low power modes
  • Embedded TCP/IP Stack with simple UART interface for command and control
  • Hostless module with FCC regulatory certification and integrated antenna for easy integration
  • Cortex-M4F CPU with integrated 512KB RAM, 128KB ROM
  • Over the air secure firmware upgrade
  • Typical applications

  • White goods/appliances
  • Consumer devices and accessories
  • Home automation
  • Personal health devices
  • IoT and wearable devices
  • Commercial and industrial application

Angezeigte Produkte 1-20 (von 56 Produkten)   Alle anzeigen

Angebot anfordern

Registrieren Sie sich, um auf dem Laufenden zu bleiben

Consult. Design. Integrate.

Wir konfigurieren Ihre Kabel

Integrationsunterstützung von Experten