Series 946 industrial control

Manufacturer's part number :

946-A4V-2D-2C0-85E

Manufacturer Honeywell

Honeywell - Sensors

Description :

The 946 series are industrial controls performing distance measurement by using an ultrasonic beam. They provide the best compromise between easy usage and advanced features. The 946 feature two switching outputs (Open collector PNP). Their adjustment is very easily done by the mean of AUTO-TUNING. By inserting a plug with four positions, one can program the sensor in a mater of seconds; the parameters are stored in a non-volatile memory (EPROM.)

View our wide range of Position products

View our portfolio of Sensors

See all products from our supplier Honeywell - Sensors

  • Quote and availability

    Features

    Scan ranges from 0.5 m to 6.0 m [1.64 ft to 19.68 ft]
  • Auto-tuning by four positions plug
  • Analogue Slope selection
  • Stainless steel M30 housing, IP65
  • Analogue outputs (4 mA to 20 mA and 0 Vdc to 10 Vdc)
  • Temperature compensation
  • M12 four-pin connector
  • Connector Cable 2.0 m [6.56 ft] included