Serial LED Driver with Filtered PWM and 32 Step S²C Dimming Control

Manufacturer's part number :


NATO number :


Manufacturer Skyworks


Description :

The AAT1403 is a step-up single channel LED driver with an input voltage range of 2.7V to 5.5V. The wide input voltage range, small solution size, advanced dimming features and high efficiency is suitable for LED backlight solutions for single cell Li-ion based equipment. A precision, high voltage current sink maintains the maximum LED current set by an external resistor from 10 to 31mA. The high switching frequency supports ultra small, low cost filtering components. Two dimming controls are available; 32 dimming steps using the S²Cwire™ interface, and filtered PWM control. The frequency range of the PWM dimming extends up to 100 kHz eliminating audible noise and suitable for CABC (Content Adaptive Brightness Control) applications. The device includes over-temperature protection and programmable over-voltage protection and recovers automatically when the fault is removed. The AAT1403 is available in a 10-pin wafer-level chip scale package (WLCSP) and is rated over the -40°C to +85°C temperature range.

View our wide range of Analogue / Mixed signal products

View our portfolio of Semiconductors

See all products from our supplier Skyworks



  • Quote and availability


    • Input Voltage Range: 2.7 to 5.5V
    • Drives Up to 45V with Typical 10 Series LEDs at 31mA
    • 1MHz Switching Frequency Allows Small External Components
    • Up to 81% Efficiency with 10μH Inductor
    • Dimming Control Options:
    • 32 Steps S2Cwire Single Wire Interface
    • Filtered PWM
    • Low Operating Current at 2.3mA
    • Shutdown Current < 1μA
    • Over-Voltage Protection for Open-LED Faults
    • Over-Temperature Protection
    • Ultra Small, Low Profile 10-pin 1.55 x 1.15mm WLCSP Package

    How wireless works

Features Similar products
Control scheme High Frequency Current Mode Control  

  similar products found

Search similar products
Switching frequency (kHz) 1000  
Max Input Voltage (V) 2.7 to 5.5  
Output Voltage (V) 45  
Typ. Active Current (µA) 430  
Output Capacitor Type 0.1 μF / 50 V, MLC Capacitor  
Output Current (mA) 31  
Operating Temperature (°C) -40 to +85  
Package WLCSP-10