High Current Step-Down Converter with High-Precision Programmable Current

Manufacturer's part number :

AAT2138IWO-0.6-T1

NATO number :

AAT2138

Manufacturer Skyworks

Skyworks

Description :

The AAT2138 is a high current synchronous step-down converter with an integrated current-limited load switch designed for high precision current control applications. By guarding against excessive input current, AAT2138 enables the system designer to maximize the output current from the step-down converter while protecting the input supply. It is designed for protection of USB ports from heavy load transient conditions commonly seen with high data rate modem applications. AAT2138 integrates a high precision programmable current limited P-channel MOSFET load switch to protect the input supply against large currents which may cause the supply to fall out of regulation. The current limit threshold is programmed up to 3A by an external resistor between RSET and ground. The AAT2138 is a 2.8MHz current mode step-down converter. It utilizes a tiny 1μH inductor and internal compensation to enable it to have an extremely small foot print. The regulator supports 100% duty cycle operation for dropout conditions. An external clock in the range of 1MHz to 3MHz can be fed into MODE as a synchronous signal for the step-down regulator. This feature offers the flexibility of fine tuning the switching frequency and optimizing performance in the application. AAT2138 is available in a Pb-free, low profile, 14-pin 3mm x 3mm TDFN package. The product is rated over the -40°C to 85°C temperature range.

View our wide range of Analogue / Mixed signal products

View our portfolio of Semiconductors

See all products from our supplier Skyworks

RoHS

RoHS

  • Quote and availability

    Features

    • Input Voltage Range: 2.7V to 5.5 V
    • Output Voltage Range: Down to 3.0V
    • Current-Limited Load Switch
    • ±10% High Precision
    • Programmable Current Limit Range: 500mA to 3A
    • High-Current Step-Down Converter
    • Efficiency up to 95%
    • 85mΩ High-Side; 50mΩ Low-Side FETs
    • 2.8MHz Switching Frequency
    • 100% Low Dropout Operation
    • No External Compensation Required
    • PFM/PWM or forced PWM Modes
    • 1MHz to 3MHz External Clock Support
    • Soft Start
    • Independent Enable Pins for Switch and Converter
    • Over-Temperature and Over Load Protection
    • -40°C to +85°C Temperature Range
    • Pb-Free, Low-Profile, 3mmx3mm 14-pin TDFN Package

    How wireless works

Features Similar products
Control scheme Peak Current Mode Step Down Control  

  similar products found

Search similar products
Switching frequency (kHz) 2800  
Max Input Voltage (V) 2.7 to 5.5  
Output Voltage (V) 3 to 5.5  
Typ. Active Current (µA) 90  
Typ. Dropout Voltage @ Max. lout (mV) 60  
Output Capacitor Type Ceramic Capacitor  
Output Current (mA) 2500  
Operating Temperature (°C) -40 to +85  
Package TDFN33-14