1A Linear Li-Ion Battery Charger

Manufacturer's part number :


Manufacturer Skyworks


Description :

The AAT3683 BatteryManager is a highly integrated single- cell lithium-ion / polymer (Li-Ion) battery charger that operates from a USB port or an AC adapter input up to an input voltage of 7.5V. The AAT3683 precisely regulates battery charge voltage and current for 4.2V Li-Ion battery cells. The battery charging current can be set by an external resistor up to 1A. Digital Thermal Loop Control maintains the maximum possible battery charging current for the given set of input to output power dissipation and ambient temperature conditions. Battery charge state is continuously monitored for fault conditions. In the event of an over-current, over-voltage, short-circuit, or over-temperature condition, the device will shut down automatically, thus protecting the charging device, control system, and the battery under charge. A status monitor output pin is provided to indicate the battery charge status by directly driving an external LED. An open-drain power source detection output is provided to report the power supply status. The AAT3683 is available in the Pb-free, thermally-enhanced, space-saving 2.2x2.2mm 10-pin STDFN (AAT3683-2) and 16-pin QFN33 (AAT3683-4) packages and is specified for operation over the -40°C to +85°C temperature range.

View our wide range of Analogue / Mixed signal products

View our portfolio of Semiconductors

See all products from our supplier Skyworks



  • Quote and availability


    • USB or AC Adapter Input
    • Programmable from 100mA to 1A
    • 4.0V to 7.5V Input Voltage Range
    • High Level of Integration with Internal: , Charging Device, Reverse Blocking Diode, Current Sensing
    • Digital Thermal Regulation
    • Charge Current Programming (ISET)
    • Charge Termination Current Programming (TERM)
    • Charge Timer (CT)
    • Battery Temperature Sensing (TS)
    • TS Pin Open Detection
    • Automatic Recharge Sequencing
    • Automatic Trickle Charge for Battery Pre-Conditioning (no trickle charge option available)
    • Full Battery Charge Auto Turn-Off / Sleep Mode / Charge Termination
    • 1μA Max. Shutdown Current
    • Over-Voltage and Over-Current Protection
    • Emergency Thermal Protection
    • Power On Reset and Soft Start
    • 2.2 x 2.2mm STDFN-10 (AAT3863-2) and QFN33-16 (AAT3683-4) Packages

    How wireless works

Features Similar products
Battery Technology Li-Ion, Li-Polymer  

  similar products found

Search similar products
Linear Mode Yes  
Number of Cells 1  
Int/Ext FET Int  
Vcc Range (V) 4 to 7.5  
Voltage Regulation Accuracy (%) 0.5  
Temperature Monitor Yes  
Charge Safety Timers Yes  
Max Thermal Regulation Yes  
Operating Temperature (°C) -40 to +85  
Package STDFN-10  
Cell Voltage (V) 4.2  
Max. Charging Current (mA) 1000