Slot Interposer Probe for PCIe 1.0 and PCIe 2.0
Manufacturer's part number :
The Keysight Technologies N5315A provides the ability to probe on the PCIe® standard card edge form-factor at all link widths; x1, x4, x8 and x16.
The N5315A uses an analog repeating design that does not distort the signal that it is probing. It also ensures that electrical idle signals are propagated correctly through the probe.
The slot interposer is designed with mechanical stabilization for both the end point and with the backplane to ensure firm PCIe slot connections.
Technical Data :
Quote and availability
- Analog repeating slot interposer
- Physical link width x1 x4 x8 x16
- Electrical Idle conditions are propagated by the slot interposer
- Mechanical stabilization for the device under test